IntelliCover is a utility which uses your device?s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
*** Features ***
Calibration:-
Proximity Sensor Delay ? Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock ? Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode ? Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen ? Show the home screen when the screen turns on.
Screen Off Only ? The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only ? The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot ? Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning ? Vibrate every time the proximity sensor is triggered.
Status Bar Notification ? Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode ? Enable or disable airplane mode.
Auto Rotate (will be removed) ? Activate or deactivate.
Auto Sync ? Activate or deactivate auto-sync.
Bluetooth ? Enable or disable Bluetooth.
Haptic Feedback (will be removed) ? Activate or deactivate haptic feedback.
Ringer Mode ? Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi ? Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn?t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ?Screen On? and ?Screen Off? actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I?ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at dragonnis.soft@gmail.com with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
*** Features ***
Calibration:-
Proximity Sensor Delay ? Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock ? Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode ? Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen ? Show the home screen when the screen turns on.
Screen Off Only ? The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only ? The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot ? Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning ? Vibrate every time the proximity sensor is triggered.
Status Bar Notification ? Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode ? Enable or disable airplane mode.
Auto Rotate (will be removed) ? Activate or deactivate.
Auto Sync ? Activate or deactivate auto-sync.
Bluetooth ? Enable or disable Bluetooth.
Haptic Feedback (will be removed) ? Activate or deactivate haptic feedback.
Ringer Mode ? Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi ? Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn?t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ?Screen On? and ?Screen Off? actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I?ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at dragonnis.soft@gmail.com with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
Facebook
Twitter
Instagram