[SamuriHL]

I had the same happen to me when I used it to flash to .230. I modified the script and inserted some pauses after every reboot command sent to the phone... seems to me like fastboot was trying to send files to the phone before the phone was ready for them.

Very possible. I just told others that they can add either a pause or a PING 127.0.0.1 -n 10 > NUL line to add a pause after each one.

[DroidST]

are you posting about adding a pause in front of both mbmloader and cdt.bin?

That is what I suggest in the other forum...

I was going to insert those and re-do the process but I think I will just wait for the next leak

[SamuriHL]

Yes it was posted by me.

For those having issues with flash errors, try modifying the following lines in the script to do this:

adb reboot bootloader
PING 127.0.0.1 -n 10 > NUL
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
PING 127.0.0.1 -n 10 > NUL
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot reboot-bootloader
PING 127.0.0.1 -n 10 > NUL
moto-fastboot flash cdt.bin cdt.bin

[Android_Lee]

So you either need a backup of it or to re-scan the barcode to relink it with your device. What I've done in the past is save the image of the QR code in a safe place so that when I flash a new ROM I can easily re-set it up.

Ah ha!! I'm glad one of us was thinking. Now to make a backup of the QR code and save it along with my back up codes. Thanks for the tip.

[Ry]

Up and running 232. Seems snappier. I'll give it a few days.

[SamuriHL]

I'm also up and running finally. That script is pretty darn handy. I managed to completely screw up my phone and was able to get it back from a nandroid and upgrade it to 232 with no problems or data/app loss.

[hokiesteve]

Well, yes, it's probably a discussion for another thread, but for the sake of trying to be helpful: The app doesn't have any account level permissions to sync with your account, otherwise you wouldn't need the QR-code business when you set it up with your device -- that's what associates wit with your account. So you either need a backup of it or to re-scan the barcode to relink it with your device. What I've done in the past is save the image of the QR code in a safe place so that when I flash a new ROM I can easily re-set it up.

That's brilliant keeping a screen capture and printout of the QR code in addition to the backup codes.

[SamuriHL]

For those using my script I updated my post with a new RUNME.zip (contains a new version of RUNME.bat). It has the pauses we've discussed as well as some cleaned up text.

[hokiesteve]

The newest leak seems great, especially now that webtop is working. It certainly makes for a much more functional webtop user experience than the old motorola one.

There's one issue i've noticed with this leak as well as one or two of the previous ones. Facebook seems to chew up a lot of CPU and battery, even when it's not active. Has anyone else noticed this?

[Ry]

For those using my script I updated my post with a new RUNME.zip (contains a new version of RUNME.bat). It has the pauses we've discussed as well as some cleaned up text.

Excellent work.

I'm still using your old script. I just manually put the phone in Fastboot mode then run the batch file. Now all I'm doing is swapping out the ICS leak file on my SD card.

Sent from my DROID BIONIC using Android Central Forums

[Ry]

Let's Golf 2 is on this version. I was able to Uninstall it (vs. Disable).

Forest Live Wallpaper is here. I don't remember that being on 230.

Sent from my DROID BIONIC using Android Central Forums

[jimdibb]

HELP please, I may be in trouble.
My bionic was already on the 905 OTA. I got your v2 zip download and the new RUNME.bat.

Ran it. Said it flashed back to 902. Now the script says install 905. My sdcard doesn't have 905 on it, only 893XT875 and the 905 to 232 files.

Can I use the 905 to 232 file because I was already at 905?
Thanks!!

[SamuriHL]

Um....if you don't have the 905 file on your sdcard-ext then my script didn't run properly. I include the 905 update in the updates folder and push it to your phone. Any way you can shut the phone down, pull the sdcard and put it in a card reader so you can copy the 905 update to it? You are definitely not on 905 now if you ran my script. Although you can probably just boot 902 and do an OTA update since you've not been on ICS yet. That should be a decent option, actually.

[Ry]

HELP please, I may be in trouble.
My bionic was already on the 905 OTA. I got your v2 zip download and the new RUNME.bat.

Ran it. Said it flashed back to 902. Now the script says install 905. My sdcard doesn't have 905 on it, only 893XT875 and the 905 to 232 files.

Can I use the 905 to 232 file because I was already at 905?
Thanks!!

You need to be on 905 to flash to any of the ICS leaks. You were at 905 but since you flashed back, you're now on 902.

I take no responsibility for what happens next, but I would shut the phone off. Then pull out the SD card and put the 902 to 905 file on it (root directory, just as the 905 to 232 file should be). Boot the phone back into Recovery, then flash to 905, then flash to 232, then wipe the cache, then reboot normally.


Sent from my DROID BIONIC using Android Central Forums

[jimdibb]

Ok, i will do that... but I just downloaded SamuriHL_HouseofBionic.v2.w6.7.232 and the updates folder on the zip file has no 5.9.905, only 5.9.902 and 5.9.905 to6.7.232 Did I get the wrong one?

Now I have to find a 5.9.905 file I guess.(?)

[SamuriHL]

No the "5.9.902" file IS the 905 update. Flash that in recovery. It's always the version you're coming from, not the version you're going to. I guarantee when they updated it for 232 (I wasn't here when it was updated) they didn't remove the 905 update. I'd shoot them if they had. Flash the "902" file then the 232 file and you're good.

[jimdibb]

ok. my bad. thx.

[SamuriHL]

It should be named this:

Blur_Version.5.9.902.XT875.Verizon.en.US(59905).zip

Notice the 59905 on the end? My naming convention is to add the version it's flashing TO on the end so as not to get confused. I haven't looked at the 232 update so I hope they continued that naming standard.

[Ry]

Motorola names the files with the version you have to be on to flash it.

So that 902 file included in the ZIP should be the 905 file.


Sent from my DROID BIONIC using Android Central Forums

[jimdibb]

I believe my overall problem was that I didn't verify the zip originally after downloading from 4share. I couldn't get the 5.9.902 out of the archive.
Now I've gone thought the OTA back up to 905. redownloaded and seem to have a good 905 update. Copied it to the sd in case I need it in the future. I'm now going to re-enter recovery, flash the ics, wipe the cache and continue the script.
If I shouldn't continue the script... let me know.
Thanks

[SamuriHL]

You don't need to continue the script. Once you update and reboot, you can run the root script manually if you want root.

[jimdibb]

Ok, I see that in the script. Thanks again.

[SamuriHL]

No problem. Good luck. Let me know if you have any issues and I'll try to help.

[jimdibb]

Can the "Upgrading media database." step take a long time?

[SamuriHL]

Oh god yea. *LONG*. Some people said it took *HOURS*...as in many. I don't have much on my phone so it was quick. I wouldn't kill it if I were you, though. Those that did regretted it.