03-10-2012 10:08 AM
65 123
tools
  1. tarheelmike's Avatar
    Droid,
    Please help advise me in recovery. I was attempting to load a swype.apk using quickboot (recommended from you). When I selected recovery in quickboot, the phone when to the bootscreen with SAMSUNG and I am stuck there. I am rooted with Voodoo Lagfix kernel flashed. Gunner suggested that I use ODIN and re-flash the voodoo kernel. Any other suggestions from you? Unfortunately I will not be able to do this until later tonight. Thanks in advance. Sorry to be a pain in the *** noob.
    06-02-2011 04:10 PM
  2. DroidXcon's Avatar
    Droid,
    Please help advise me in recovery. I was attempting to load a swype.apk using quickboot (recommended from you). When I selected recovery in quickboot, the phone when to the bootscreen with SAMSUNG and I am stuck there. I am rooted with Voodoo Lagfix kernel flashed. Gunner suggested that I use ODIN and re-flash the voodoo kernel. Any other suggestions from you? Unfortunately I will not be able to do this until later tonight. Thanks in advance. Sorry to be a pain in the *** noob.
    Yeah sounds like it needs to be reflashed.

    Sent from my SCH-I510 using Tapatalk
    tarheelmike likes this.
    06-02-2011 04:51 PM
  3. tarheelmike's Avatar
    Yeah sounds like it needs to be reflashed.

    Sent from my SCH-I510 using Tapatalk
    I will give it a shot later once I am home form work and will give you a status report then. Again, thanks for the patience and assistance.
    06-02-2011 04:57 PM
  4. Raptor007's Avatar
    How did you fix this?
    I wasn't able to. The two options is to have a full image that can be flashed in Odin (or Heimdall) or get an update.zip file. The former is going to take some work or someone to leak it and the latter is being worked on by imnuts. I know he is making progress, but he isn't done yet.
    06-02-2011 07:59 PM
  5. Raptor007's Avatar
    That is the tricky part of having a Samsung device, we can't use CWM Recovery, yet.
    06-02-2011 08:01 PM
  6. elucid's Avatar
    Any update on cwm?

    Sent from my SCH-I510 using Tapatalk
    06-04-2011 01:20 PM
  7. TrendyProfessional1's Avatar
    Thanks DX did it. One problem I cannot download from market. I neeed to go where I get a solid 4g signal. If memory serves me right it seems that in my apt my phone would go between 4g and 3g now it is just solid 3g gonna check some settings. But any suggestions.
    Thanks
    Will be getting that Machiato to u
    06-05-2011 12:40 PM
  8. Raptor007's Avatar
    I finally got around to rooting my replacement today, and Odin works, the phone shows up, I clicked start on the Voodoo kernel it says Pass, then Reset. My charge goes dark and then nothing. I know on my original phone it worked without issue, but this time it won't root. Very odd. I know I'm not missing anything, battery out, open Odin, press vol. down until D/L mod shows up. Select the kernel (even tried a fresh d/l) still no go.

    I did restore using the Rooted Stock ED1, then updated and restart/install update. It still says ED1 in the about phone section. Odd.
    06-05-2011 04:19 PM
  9. ups2525's Avatar
    I did restore using the Rooted Stock ED1, then updated and restart/install update. It still says ED1 in the about phone section. Odd.
    I followed the same steps mentioned and experienced the same results yesterday while out on the lake...returned home today flashed AC's AltB and I'm kickin !@# now. Currently ED2 rooted Altered Beast, previous Quandrant mid 900's, and after flashing AltB current benchmark in low to mid 1400's!! I don't know if you were considering going this direction but it was easy...good luck!
    06-05-2011 06:40 PM
  10. i0sandman0i's Avatar
    flashed this with odin, im on stock ED2. how do i go about "freezing" bloatware at this point? I was assuming it was supposed to be done through titanium but i cant get it to recognize root, i installed busybox but to no avail..... any ideas?
    06-06-2011 05:37 PM
  11. DroidXcon's Avatar
    flashed this with odin, im on stock ED2. how do i go about "freezing" bloatware at this point? I was assuming it was supposed to be done through titanium but i cant get it to recognize root, i installed busybox but to no avail..... any ideas?
    open up titanium backup hit the problems button and update busybox from there
    06-06-2011 05:41 PM
  12. neemo6's Avatar
    Only reason I would like to do this is to root to get rid of bloatware, wifi tether app, and OC eventually. Also really want to switch over to ext4 to get rid of this darn lag. Other than that i like my phone the way it is, i dont want/need a different rom and would like my phone to still be reliable. Is this right for me? Or should I wait for more stable kernels?
    06-06-2011 09:25 PM
  13. Raptor007's Avatar
    I followed the same steps mentioned and experienced the same results yesterday while out on the lake...returned home today flashed AC's AltB and I'm kickin !@# now. Currently ED2 rooted Altered Beast, previous Quandrant mid 900's, and after flashing AltB current benchmark in low to mid 1400's!! I don't know if you were considering going this direction but it was easy...good luck!
    I have been on the fence about doing the custom ROM's honestly its more of an aesthetics thing than anything else. I have read great things about the AB ROM here and have had great PM's with DroidXcon and he has been great to help. Right now I just want something clean, simple, no frills. I know for some its boring for me its what I want to run.

    The problem is I have been having nothing but issue after issue after issue trying to get Voodoo and CWM to work with a deodexed ED2 ROM or a few others. Its funny, I know what I am doing, I can get it to work but it hangs here or there. I was going to try one more thing tonight and that was to install CWM, flash the Voodoo Lagfix kernel, install a ED2 Deodexed (remove bloat from there myself) and if it hangs flash the Voodoo Lagfix kernel one more time as suggested.

    If this still fails me, again, then I will hop on the AB wagon. DroidXcon's work is excellent.
    06-07-2011 08:10 PM
  14. neemo6's Avatar
    I will be attempting this tommorow, but have a few more quick questions.
    1. What happens if there is an OTA update?
    1a) Is it automatically blocked or does one have to not update and wait for an update to this kernel?
    2. Also is there a way to create a backup of my stuff before attempting this in case anything goes haywire?
    3. Is there an easy way to uroot/turn off voodoo in case phone has to go back to verizon for anything?
    06-07-2011 10:03 PM
  15. evercleardoc's Avatar
    I just updated to this and it works great! thanks!
    one question... I lost my email notification icon... it doesn't have the # of unread messages next to the badge. Not sure if this is from the flash or, if it's from LauncherPro Plus. Any input from anyone would be greatly appreciated!
    06-07-2011 10:08 PM
  16. neemo6's Avatar
    It must be from laucher pro as I do not have it either after installing LP.
    06-07-2011 10:55 PM
  17. lilexecutioner's Avatar
    Ok i flashed the file using odin but i got a Fail, now my phone shows me a phone with a ! and a computer? I have no idea what to do.
    06-08-2011 06:00 PM
  18. DroidXcon's Avatar
    Ok i flashed the file using odin but i got a Fail, now my phone shows me a phone with a ! and a computer? I have no idea what to do.
    Did you install proper drivers ? Try a USB port in the rear of computer.

    Also close and reopen odin before attempting again

    Sent from my SCH-I510 using Tapatalk
    06-08-2011 06:04 PM
  19. lilexecutioner's Avatar
    Ok usb drivers i got from the link on how to use odin that you posted here. I connected the usb to the back of the machine and it still gives me failed. This is what comes up in the message box.


    <ID:0/007> Added!!
    <ID:0/007> Odin v.3 engine (ID:7)..
    <ID:0/007> File analysis..
    <ID:0/007> Enter CS for MD5..
    <ID:0/007> Check MD5.. Do not unplug the cable..
    <ID:0/007> Please wait..
    <ID:0/007> Checking MD5 finished Sucessfully..
    <ID:0/007> Leave CS..
    <ID:0/007> SetupConnection..
    <ID:0/007> Initialzation..
    <ID:0/007> Get PIT for mapping..
    <ID:0/007> Firmware update start..
    <ID:0/007> zImage
    <ID:0/007>
    <ID:0/007> Complete(Write) operation failed.
    <ID:0/007> Removed!!
    <OSM> All threads completed. (succeed 0 / failed 1)

    any ideas?
    06-08-2011 06:16 PM
  20. DroidXcon's Avatar
    Did you review and try all the trouble shooting methods

    Sent from my SCH-I510 using Tapatalk
    06-08-2011 06:21 PM
  21. lilexecutioner's Avatar
    Ah i figured it out i didnt know i had to put the battery back in after it was in the downloading state. That seems to have worked.
    06-08-2011 06:43 PM
  22. DroidXcon's Avatar
    Ah i figured it out i didnt know i had to put the battery back in after it was in the downloading state. That seems to have worked.
    thats usually not the case but if it worked great
    06-08-2011 06:44 PM
  23. ScottDroid's Avatar
    Will this root the newest update that went out live tonight ?
    06-09-2011 12:54 AM
  24. neemo6's Avatar
    I was wondering the same thing, as I just flashed this kernel yesterday. Now I'm not sure a what to do now that this update came out.
    06-09-2011 09:03 AM
  25. Veregund's Avatar
    Just to confirm:

    I'm on stock ED2 right now.

    Flashing this file will both root my phone and install the lagfix kernal? Or do I have to root it before flashing this?

    Do I need to flash clock work before I flash this?

    Thanks.
    06-12-2011 03:20 PM
65 123
LINK TO POST COPIED TO CLIPBOARD