[uh60james]

Disclaimer:I am not responsible for damage caused to your device, person or ego by you following any steps listed in this thread or installing/running any linked files.

WARNING

-It has been reported on RootzWiki by “colonel panic” that updating WebOS to 3.0.4 breaks mboot. See his thread for more info.

This can reportedly be fixed by running the ACME installer again and installing mboot only. I have not tried this.

░░░░░░░░░░░░░░░░░░FIXES ░░░░░░░░░░░░░░░░░░

-Touchscreen unresponive after sleep Issue (Fixed in Alpha 2)
This is for a touchscreen that is lit but unresponsive on wake.

adb push this file to /system/lib/hw/ (don't forget to remount system rw first)



-Sleep of death(At least partially fixed in Alpha 2)
This problem occurs when your Touchpad goes to sleep and will not wake requiring a reset.

Solution: Set your Min CPU frequency to or higher.

-Touchstone charging device not working
Solution:
settings >
wireless and networks >
mobile networks >
data enabled - TURN THIS OFF

-Appsnot working due to lack of GPS
Solution: Install Fake GPS from the market and set a location manually. Apps that require GPS should now work.

-MissingAppsfrom the Market(At least partially fixed in Alpha 2)
Solution:
-Download this zip:
-Install using ClockworkMod.
-Install Facebook, Dolphin Browser HD, etc.

░░░░░░░░░░░░░░░░░░TWEAKS ░░░░░░░░░░░░░░░░░░

-Install Android Market 3.2.0 (Ice Cream Sandwich)
-Download the Flashable zip file.
-Do a Nandroid Backup.
-Reboot into Recovery & Flash the zip.

Source:

░░░░░░░░░░░░░░░░░░ETC. ░░░░░░░░░░░░░░░░░░

-Install GoogleApps(Includes Android Market)
-Download the Google Apps Zip file for CM7
-Flash the Zip with CM Recovery

-Install Zinio (Market version crashes)
-Install Zinio Reader 2.03
-Install Zinio Settings Provider
-Reboot CM7
-Enjoy!

Files and Source:

-Get Dead Space working with powervr plugin
-Download Chainfire 3D from the Android Market
-Download root explorer from the app store
-Navigate to /system and change access from r/o to r/w
-Install Chainfire 3D
- Chainfire 3D plugins and put them in the root of your SD card
-Install plugins in Chainfire 3D
-Enable the powervr plugin in Chainfire 3D
-Install Dead Space with powervr plugin

-Share Bluetooth between Android phone and TouchPad
-Download and install “Share GPS Beta” onto your phone. Tick NMEA in settings.
-Download and install “Bluetooth GPS” onto your touchpad. Select mock GPS provider.
-Pair the phone and TouchPad.
-In Bluetooth GPS app on TouchPad find your phone and connect to it.



-Enable Lock Screen
Settings>
Cyanogen Mod>
Tablet Tweaks>
Uncheck “Disable Lock Screen”

-Completely remove CM7 from TouchPad
-Download ACME Uninstaller
-Unzip the installer.
-Turn off your TouchPad
-Power on TouchPad while holding volume up until you see a large white USB icon on your screen.
-Connect TouchPad to computer.
-Open Command Prompt and navigate to the directory you unzipped the uninstaller in.
-Type “$ novacom boot mem:// < ACMEUninstaller”



Credits: I do not claim this work to be my own. If you find a fix that you believe to be yours let me know. Thanks to "ncinerate" "demonhighwayman” "darkredflame"</SPAN>

[uh60james]

TIPS

Take a screenshot
-Hold the power button
When the menu comes up press screenshot!

Adjust brightness with status bar
-Menu > Settings > CyanogenMod Settings > Interface > Status bar tweaks > Status bar
brightness control
-Slide your finger across the status bar to adjust brightness!

[DeadVim]

As my first post around here I'd like to thank uh60james for that

I am a refugee from another Touchpad forum and have not installed CM Alpha 1 but am eagerly awaiting Alpha 2 when it hits. Looking forward to this forum getting livelier as the masses gravitate this way.

[funb0b]

As my first post around here I'd like to thank uh60james for that

I am a refugee from another Touchpad forum and have not installed CM Alpha 1 but am eagerly awaiting Alpha 2 when it hits. Looking forward to this forum getting livelier as the masses gravitate this way.

Wait no more, Alpha 2 is already out

[DeadVim]

Wait no more, Alpha 2 is already out

And so is 2.1, this will push me over the edge when I'm sober enough to comprehend the instructions.

[funb0b]

Lol you'll be ok.

[Gratificulous]

And so is 2.1, this will push me over the edge when I'm sober enough to comprehend the instructions.

Ah you'll be fine, I found it easier (and less stressful than rooting/romming my D2).

I created a thread here with some links to helpful installs and faq's.

[uh60james]

And so is 2.1, this will push me over the edge when I'm sober enough to comprehend the instructions.

Glad I could be of some help. You will find a lot of helpful people here and quickly learn the in's and out's of Android. Don't be worried too much about installing CM7, its actually easier than the instructions posted around the web make it sound!

[DeadVim]

Lol you'll be ok.

Glad I could be of some help. You will find a lot of helpful people here and quickly learn the in's and out's of Android. Don't be worried too much about installing CM7, its actually easier than the instructions posted around the web make it sound!

Hey, I'm a software engineer with more years experience than I care to mention, what can possibily go wrong?

Manual labour first, then it's getting installed

[uh60james]

The best of luck to you!

[soricon]

And so is 2.1, this will push me over the edge when I'm sober enough to comprehend the instructions.

Try this tutorial, the easiest I found yet...

[DeadVim]

The best of luck to you!

Try this tutorial, the easiest I found yet...

Thanks, I installed it yesterday afternoon, a measure of how much fun I was having is that the OH got peed off with me when she wanted to use it.

The only time I went back to webOS was for a Suduko game she is hooked on (I'll find a droid replacement ...) and to charge the thing overnight

I did a bit of browsing in webOS last thing and the relative 'stutter' was very noticeable.

[RobWest501]

Currently enjoying the Alpha 2.1 on my TouchPad. Tonight I installed Google Earth works great quite responsive, can maneuver using 2 fingers to rotate map. I doubt I'll use WebOS again.

[DeadVim]

Currently enjoying the Alpha 2.1 on my TouchPad. Tonight I installed Google Earth works great quite responsive, can maneuver using 2 fingers to rotate map. I doubt I'll use WebOS again.

Google Earth, nice, I'm installing that tonight.

[jediangell]

I did the Webos update.... It did indeed wipe the moboot. and recreating the install steps but only placing the moboot zip in the "cminstall" folder did the trick.

[kenmitch]

I still like to dabble in webOS even tho I'm dual booting with CM7 as it seems some streaming vidoes seem to work much better in webOS

When in CM7 if I hold power then choose reboot > reboot to webOs it only works when charging? While hooked up to computer with USB cable it works. No cable hooked up it kinda works > have to hold power button down untill logo pops up. Is this normal for everybody?

[moshe5368]

So far. Cm7 a2.1 seems to be very responsive but the battery life is significantly less than webos. I still use webos as I have started working with the enyo programming framework. Seems a shame to let a good os die.

I have been working with cm7 for quite some time on the nook color and the move to the touchpad was great from the 7 inch to the 10 inch format. Quadrant scores are a bit below what I would expect from the better hardware but I'm sure it will improve with updates to cm7.

Sent from my HP Touchpad using Tapatalk

[Xsever]

Newsflash guys!

I set the POWERSAVE governor before going to bed. My battery was at 100%.

I woke up after 8 hours and the battery is at 96%.

Therefore, battery drain while on standby for 8 hours went from 10% (with ondemandtcl) to 4% (with powersave).

[cgk]

Anyone else getting forced closes with google docs?

[DeadVim]

Anyone else getting forced closes with google docs?

I don't use it myself but I was reading about similar issues over at Rootzwiki.

[cgk]

I don't use it myself but I was reading about similar issues over at Rootzwiki.

Thanks, there is an old version that works fine and is available from over there.

This is a good list to bookmark:

[DeadVim]

Thanks, there is an old version that works fine and is available from over there.

This is a good list to bookmark:

Ta, thats an excellent link and a new one on me.

[Xsever]

As I am new to android, I might be missing something.

I went into the market to download an app. I tapped on the screenshots to take a look. I was able to swipe through the pictures but I could not exit. The back button was not there and pressing the home button on the TP would take me back to the homescreen.

I tried killing the market app to start from scratch, but that did not solve it. Each time I load the market app, I get the screenshots again.

Help please.

[DeadVim]

As I am new to android, I might be missing something.

I went into the market to download an app. I tapped on the screenshots to take a look. I was able to swipe through the pictures but I could not exit. The back button was not there and pressing the home button on the TP would take me back to the homescreen.

I tried killing the market app to start from scratch, but that did not solve it. Each time I load the market app, I get the screenshots again.

Help please.

There should be a back button at the bottom of the screen, third from the left, looks like a back arrow <---

I have to say when I started using CM7 it foxed me for a bit too, it becomes intuitive after a while though

[Xsever]

There should be a back button at the bottom of the screen, third from the left, looks like a back arrow <---

I have to say when I started using CM7 it foxed me for a bit too, it becomes intuitive after a while though

I know the bar that is usually present and has the home button, the option button, and then the back button.

But this bar does not appear when I am seeing the screenshots in full screen.