1. LeoRex's Avatar
    OK, I saw yet another blog post saying that fiddling with the thermal throttle can speed up the phone a bit.. .makes sense, but could be risky if your use is the kind of things that heats up the phone. Anyhow, each one says "find the "Thermal mitigation daemon OFF" option in the list, and enable it to ON position."

    So I figure I'd give it a look, just to see if it made any difference. So I go into the hidden menu.... and it's already set to the ON position.

    huh?

    The phone was bought new from T-Mobile and had all the little plastic protective bits all over the thing and didn't appear to be a rebox, but what's up with this? Is it something that T-Mobile has turned off, just to be different (like how they are the only one with an unlocked bootloader?)
    08-08-2014 04:04 PM
  2. Gator352's Avatar
    OK, I saw yet another blog post saying that fiddling with the thermal throttle can speed up the phone a bit.. .makes sense, but could be risky if your use is the kind of things that heats up the phone. Anyhow, each one says "find the "Thermal mitigation daemon OFF" option in the list, and enable it to ON position."

    So I figure I'd give it a look, just to see if it made any difference. So I go into the hidden menu.... and it's already set to the ON position.

    huh?

    The phone was bought new from T-Mobile and had all the little plastic protective bits all over the thing and didn't appear to be a rebox, but what's up with this? Is it something that T-Mobile has turned off, just to be different (like how they are the only one with an unlocked bootloader?)
    It could've been something Tmo turned "ON" by default. But to be honest, I think it was/is a sham. Everywhere I read said it works on all G3's (T-mo, VZW, Sprint, and AT&T) and been tested and approved on all carriers!! The only problem is that Sprint's version doesn't have the option. So how can it have been tested and approved for Sprint when the option isn't there in the menu?? It wasn't. Period.

    Don't even bother yourself or stress over it. Enjoy your phone till the next update arrives!
    08-08-2014 05:55 PM
  3. bigkevbosky's Avatar
    No, you switch it "off". When it's switched "on", which it is by default, it throttles the processor when it heats up. So when gaming or doing some processor intensive task it'll reduce it's clock speed to keep it from overheating. If you switch it "off", it doesn't throttle itself, but that could cause it to overheat. I had it off for a while, and only had the device shut down automatically from heat once. But today I reflashed stock and left it on. Instead, there's another tweak - if you scroll to the bottom of the list it shows "Dynamic LCD Refresh". Turn it off and set it to run at 60 fps at all times.

    LG included this dumb setting to reduce the frame rate of the LCD below 60 if it doesn't think it needs it - this is what causes the "stutter" you see in the launcher and other places. If you force it to run at 60 fps at all times, it eliminates the stutter. And I haven't noticed any detriment so far - doesn't seem to heat the phone up any more or anything.
    LeoRex likes this.
    08-08-2014 06:44 PM
  4. LeoRex's Avatar
    I'll give that a look, thanks. Guessing with the framerate fixed, there might be an impact on the battery, but whatever, that's why I have chargers. 😃
    08-09-2014 01:26 AM
  5. pmcnei11's Avatar
    I'll give that a look, thanks. Guessing with the framerate fixed, there might be an impact on the battery, but whatever, that's why I have chargers. 😃
    Framerate will affect battery and heat. The extra heat will cause more throttling and affect performance so is it really worth it/
    08-09-2014 04:52 AM
  6. LeoRex's Avatar
    Framerate will affect battery and heat. The extra heat will cause more throttling and affect performance so is it really worth it/
    We'll soon see... I haven't had any heating issues, so if now I start getting some, I'll know the answer to your question.
    pmcnei11 likes this.
    08-09-2014 07:55 AM
  7. xocomaox's Avatar
    I just changed my FPS to force 60. Haven't noticed much of a change, but then again I haven't really noticed any lag.
    08-11-2014 10:25 AM
  8. eddyknights's Avatar
    well when I go into the menu and I disable and I put it at 60 frames and I shut down the phone it automatically defults back to enable and 30 .. how do I keep it at 60 without going back to 30 frames
    08-12-2014 04:58 PM
  9. eddyknights's Avatar
    how does one change the setting to 60 without it defaulting back
    08-12-2014 04:59 PM
  10. eddyknights's Avatar
    I can disable n put it at 60 n exit the menu screen n it stays but when I reboot it defaults back to disable im at ATT n running art it did let me put thermal off though
    08-12-2014 05:26 PM
  11. eddyknights's Avatar
    No, you switch it "off". When it's switched "on", which it is by default, it throttles the processor when it heats up. So when gaming or doing some processor intensive task it'll reduce it's clock speed to keep it from overheating. If you switch it "off", it doesn't throttle itself, but that could cause it to overheat. I had iti off for a while, and only had the device shut down automatically from heat once. But today I reflashed stock and left it on. Instead, there's another tweak - if you scroll to the bottom of the list it shows "Dynamic LCD Refresh". Turn it off and set it to run at 60 fps at all times.

    LG included this dumb setting to reduce the frame rate of the LCD below 60 if it doesn't think it needs it - this is what causes the "stutter" you see in the launcher and other places. If you force it to run at 60 fps at all times, it eliminates the stutter. And I haven't noticed any detriment so far - doesn't seem to heat the phone up any more or anything.
    No its off by default. Atleast through AT&T.. Everyone says ur supposed to flip it on.. I know there's another option about tempeture that one is also off n ur supposed to also turn on to limit ur phone from lowering brightness down automatically when ur phone reaches a certain tempeture
    08-12-2014 08:46 PM
  12. eddyknights's Avatar
    eddyknights eddyknights is online now
    eddyknights's Avatar
    Posts171 Posts
    Fixing Lag Issues

    Step 1: Open the phone app on your LG G3 and enter the following code that corresponds to your the variant of your phone.

    European International Version: 3845#*855#




    T-Mobile: 3845#*851#

    AT&T: 3845#*850#

    Sprint: 5689#*990#

    Step-2: After scrolling down a little, you will find ‘High Temperature Property OFF’ option.

    Step-3: Choose it and then change it to ON.

    Step-4: Once done, switch off your LG G3.

    Step-5: Wait for nearly 10 seconds then power it back up

    Step-6: Enjoy a lag free LG G3.

    How to speed up your LG G3

    Step-1: Open the phone app on your LG G3 and enter the code which corresponds to the variant of your device. Same as above.

    Step-2: Scroll down until you see the ‘Thermal Daemon Mitigation OFF’ option.

    Step-3: Select it and then switch it on.

    Step-4: Turn off your LG G3 and then wait for nearly 30 seconds.

    Step-5: Power your phone back on and wait for the lock screen to come up.

    Step-6: Unlock your phone once the lock screen appears

    Step-7: Wait for nearly a minute so that your phone finishes syncing.

    One thing to keep in mind is that once you enable Thermal DAE, adaptive brightness will cease to function.

    Let us know if you have an LG G3 and decide to use these tweaks, and how they work out.

    Has anyone tried these tweaks ....
    08-12-2014 08:52 PM
  13. eddyknights's Avatar
    anyone
    08-13-2014 10:57 AM

Similar Threads

  1. Replies: 2
    Last Post: 08-08-2014, 08:36 PM
  2. Replies: 3
    Last Post: 08-08-2014, 07:50 PM
  3. Battery history on new phone
    By Gbuch in forum Ask a Question
    Replies: 2
    Last Post: 08-08-2014, 04:39 PM
  4. S5 Increase Volume in Pocket setting missing?
    By tyrsis00 in forum Samsung Galaxy S5
    Replies: 1
    Last Post: 08-08-2014, 04:05 PM
  5. Replies: 0
    Last Post: 08-08-2014, 02:43 PM
LINK TO POST COPIED TO CLIPBOARD