[ROM][2.3.3][ZVJ] GingerRom v1.3 -4/14/12-

**hlxanthus** · 04-23-2012, 01:20 PM

Yeah, I tried that app for a few days and notice that battery drain.

Sent from my LS670 using Tapatalk 2

**ikeywatson** · 04-23-2012, 02:01 PM

yep,same thing over here,unistalled it .it didnt look as good and even after moving it to system/app,i couldn't toggle data,great app by any means.

**VT Solo2** · 04-23-2012, 02:39 PM

Originally Posted by drewwalton19216801

It's also good for draining your battery.

Oh, I haven't noticed the battery drain yet, but I haven't had it for long. I was actually wondering why no one mentioned it earlier, now I know. Looks like I'll be going back to the Power Control widget.

**ryandubbz** · 04-23-2012, 06:37 PM

anyone notice any freezing issues when in your email on this phone, i currently have ginger rom 1.3 with hyrdokernel 01pre03 gb. Along with amphetamines, script updater, clock mod, no button mod and powermod.

The only issue is when in email that i will read one and then try and back out but it wont let me and then it says force close. I am currently not overclocked

**scifan** · 04-23-2012, 11:32 PM

Originally Posted by ryandubbz

anyone notice any freezing issues when in your email on this phone, i currently have ginger rom 1.3 with hyrdokernel 01pre03 gb. Along with amphetamines, script updater, clock mod, no button mod and powermod.

The only issue is when in email that i will read one and then try and back out but it wont let me and then it says force close. I am currently not overclocked

I haven't had any issues with lockups... I'm running most of your list... (no amphetamines, or script updater...)

Should I be running "ondemand" or one of the other scaling methods? if I have it set at 600/245, it seems to stay at 600 alot... (eg most of the time) I'm not using a task killer... not sure if this is proper behavior... (never really looked before)

**pilot03** · 04-24-2012, 01:31 PM

Noticed the battery drain with Notification Toggle. Liked it but removed it to extend battery charge.

**res6jya6** · 04-24-2012, 11:58 PM

Installed an ICS theme with ADW... looks nice and all, but is there any way I can change the status bar notifications (wifi/signal/etc) so they reflect the true ICS colors? There's something unappealing with all that neon green and blue...

**drewwalton19216801** · 04-25-2012, 12:46 AM

Originally Posted by res6jya6

Installed an ICS theme with ADW... looks nice and all, but is there any way I can change the status bar notifications (wifi/signal/etc) so they reflect the true ICS colors? There's something unappealing with all that neon green and blue...

That would require modification of core system frameworks. You could try UOT Kitchen.

**evo_ceren** · 04-25-2012, 07:29 AM

hi noob here.lol i was trying to see if i can use UOT Kitchen on this rom but every time i flash the uot theme it says opening then goes right back to recovery..is there any specail way to flash over this rom??? i tryed the UOT Kitchen recommendations but no luck...great rom btw no problems so far.. can anyone help, please. thank you

**drewwalton19216801** · 04-25-2012, 09:04 AM

Originally Posted by evo_ceren

hi noob here.lol i was trying to see if i can use UOT Kitchen on this rom but every time i flash the uot theme it says opening then goes right back to recovery..is there any specail way to flash over this rom??? i tryed the UOT Kitchen recommendations but no luck...great rom btw no problems so far.. can anyone help, please. thank you

Did you reboot to Android to see if it worked?

**hlxanthus** · 04-25-2012, 10:52 AM

Originally Posted by evo_ceren

hi noob here.lol i was trying to see if i can use UOT Kitchen on this rom but every time i flash the uot theme it says opening then goes right back to recovery..is there any specail way to flash over this rom??? i tryed the UOT Kitchen recommendations but no luck...great rom btw no problems so far.. can anyone help, please. thank you

Make sure you upload the framework-res.apk and systemui.apk from ginger rom. Turn off generate preview. wipe cache/dalvik cache and flash.

**VT Solo2** · 04-25-2012, 11:25 AM

Originally Posted by hlxanthus

Make sure you upload the framework-res.apk and systemui.apk from ginger rom. Turn off generate preview. wipe cache/dalvik cache and flash.

I was able to get it to work by doing that and selecting the amend scripting option.

One thing that I can't figure out is how to change the signal strength indicator using the kitchen. Most of the other notification bar icons work, but for some reason the stock signal indicator remains. Any ideas?

**evo_ceren** · 04-25-2012, 05:32 PM

Originally Posted by drewwalton19216801

Did you reboot to Android to see if it worked?

yes i did but no luck.

**evo_ceren** · 04-25-2012, 06:40 PM

Originally Posted by VT Solo2

I was able to get it to work by doing that and selecting the amend scripting option.

One thing that I can't figure out is how to change the signal strength indicator using the kitchen. Most of the other notification bar icons work, but for some reason the stock signal indicator remains. Any ideas?

well i opened up the uot zip and everything was the same but the boot animation and the settings.uot. does anyone now how to apply these two files onto the phone???what program do i use. thank you

**Invincible Madness** · 04-25-2012, 07:23 PM

Flash the uot zip from recovery?

**evo_ceren** · 04-25-2012, 07:36 PM

i did what was recommended and it worked.. thank you everyone ..no i just got to figure out how to flash boot animations..

**hlxanthus** · 04-25-2012, 08:10 PM

Originally Posted by evo_ceren

i did what was recommended and it worked.. thank you everyone ..no i just got to figure out how to flash boot animations..

easy way, use UOT to add JUST a bootanimation, doesnt matter which. Then crack it open with 7zip and navigate to what you need and delete/replace and save. dont actually extract the zip, that way it will still be signed

**ryandubbz** · 04-25-2012, 08:48 PM

I see alot of people using Ginger rom with ginger kernel, but i thought ginger kernel was made for zvd?

Hydrokernel is made for ZVJ right? So would the best combo be gingerom 1.3 with hydro kernel?

Sorry for being such a F'in Noober

**Zhara** · 04-25-2012, 09:05 PM

Originally Posted by ryandubbz

I see alot of people using Ginger rom with ginger kernel, but i thought ginger kernel was made for zvd?

Hydrokernel is made for ZVJ right? So would the best combo be gingerom 1.3 with hydro kernel?

Sorry for being such a F'in Noober

Either one works fine, though gingerkernel was built from zvh source so if you have any issues, try hydrokernel. And yes, hydrokernel was built from zvj.

**nazzo** · 04-26-2012, 07:00 AM

I'm sorry for asking a noob question but I cannot find my questions via the OP or searching the forum - does this rom or any of the linked kernels by Drewwalton support App2SD? If not, is it possible to run some ADB whatnot to allow my to use the ext4 partition on my SD card to install apps to in this GingerRom?

**mobius1484** · 04-26-2012, 04:52 PM

Originally Posted by ryandubbz

I see alot of people using Ginger rom with ginger kernel, but i thought ginger kernel was made for zvd?

Hydrokernel is made for ZVJ right? So would the best combo be gingerom 1.3 with hydro kernel?

Sorry for being such a F'in Noober

Gingerkernel was built for ZVH. If you flash GingerRom I would very much recommend flashing hydrokernel for GB. Consider it a must have.

**scifan** · 04-26-2012, 06:03 PM

I'm confused/frustrated...

I had a Kenwood deck... kdc-X994... it acted quirky (USB/Ipod connection would freak out periodically and lockup both the USB and the CD player...) but bluetooth would work fine... and my phone book would transfer from my Optimus S w/ Gingerom v1.3 w/ hydrokernel Pre3... Audio streaming would work (but I'd have to disconnect and reconnect my phone when switching to btaudio)...

Because of the issues (and an extended warranty) yesterday my deck was upgraded/replaced with a KDC-X996... my phone pairs fine... audio streaming works great... pandora links up fine... my phonebook... doesn't transfer...

The deck is supposed to support these connection methods:
KENWOOD Bluetooth Products are compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
A2DP(Advanced Audio Distribution Profile)
AVRCP(Audio/Video Remote Control Profile)

Any idea's?

**nazzo** · 04-26-2012, 06:33 PM

Does it work with the stock rom/kernel?

**r0gu3dev1pr** · 04-26-2012, 06:43 PM

Team Hydro,
Any chance in providing the battery power meter from HydroRom as a flashable zip?
I would like to use it with GingerRom.

Sent from my iPad using Tapatalk HD

**scifan** · 04-26-2012, 06:52 PM

Originally Posted by nazzo

Does it work with the stock rom/kernel?

Not sure... Haven't been stock by choice for over a year...

I'm upgrading the firmware on the deck as I type... 3.0 -> 4.0... We'll see if that fixes things. Again, this worked properly with the other kenwood deck... Updates are supposed to resolve bt compatibility issues...

Sent from my LS670 using Tapatalk