[zefie]

The hardware is there, and CyanogenMod + MIUI already did it for the Nexus One, so surely it is possible.

http://www.androidcentral.com/cyanog...-radio-support

The only apparent differences is the N1 has BCM4329 and we have BCM4325. The only apparent differences between those two chips is that the 4329 (N1) also can TRANSMIT FM, and has 802.11n. It should still be possible though!

[jerry43812]

Sounds beautiful. Can I feature this work on [MyWebSite]? I will probably just copy and paste the informations, lemme know your terms.

[zefie]

Sounds beautiful. Can I feature this work on [Website Removed]? I will probably just copy and paste the informations, lemme know your terms.

We haven't accomplished anything yet. I tried working with the GT540's FM Radio but the only dump I could find was pre-2.0 so i couldn't integrate it into our ROM.

[nachtwolf88]

This would be.cool what would even be better is a way for us to broadcast as well so no more hook up.for.phone to car connections

Sent from my LS670 using Tapatalk

[Cory Streater]

Sounds beautiful. Can I feature this work on [MyWebSite]? I will probably just copy and paste the informations, lemme know your terms.

No.

[zefie]

This would be.cool what would even be better is a way for us to broadcast as well so no more hook up.for.phone to car connections

Sent from my LS670 using Tapatalk

Unfortunately our chip does not have the transmit feature.

[nachtwolf88]

Unfortunately our chip does not have the transmit feature.

yea that is sad would be cool but fm radio would be nice........wait what am i thinking radio in my area sucks lol eh i have pandora

[Jerry Hildenbrand]

The P500 has the same chip, and a working FM radio

Here's the boot.img


Here's the kernel config


Here's the system dump:


Holler if you need anything else, and good luck!

[zefie]

The methods in AudioManager are the same so injecting the FM functions went smoothly, no errors, but no radio either.

It sits on "Please wait" and logcat says:
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 1
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 2
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 3
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 4
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 5
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 6
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 7
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 8
W/FM radio( 2585): [FmRadio][RadioOnRunable] waiting to service ready - 9
D/FM radio( 2585): [FmRadio][RadioOnRunable] interrupted

Bluetooth is on. I can feel I am close though.

Edit: think i'm getting closer, still trying to hack the framework to enable bluetooth fm radio service. most of the code is there just not the enabler.

Edit2: got everything to work flawlessly, as in no crashes, but no radio. same issue.

11-29 02:42:38.321: ERROR/BluetoothProxyManager(2718): Unable to get service proxy for bluetooth_fm_receiver_service. Service is not enabled...

[godawgs]

Or you can just download "Tunein Radio". Pretty nice app....

[zefie]

Or you can just download "Tunein Radio". Pretty nice app....

This is about FM radio not Internet Radio. Why does every FM radio thread get plagued with "but I can stream it online with *insert app*"?

BTW I have the full version of Tunein, RadioTime. It is a nice app, but they don't have EVERY station due to licencing.

Also, even if it did, it wouldn't stop me from wanting to unlock features of my device.

[KSmithInNY]

It's been my experience on the EVO that streaming a radio station takes up significantly more battery than listening to FM. So if FM will work, and you want to listen to a local station, this may be a much better option than streaming. Additionally, listening to a station over FM doesn't weigh into your unspoken 5gb data cap (not like sprint is enforcing it but it does exist). Streaming 1 single episode of rovers morning glory on iheartradio is slightly less than 1gb i believe is what rover measured it out to when he was complaining about carrier caps.

Point being, there are several functional reasons why people would want to see this come to fruition.

[ccrs8]

Streaming 1 single episode of rovers morning glory on iheartradio is slightly less than 1gb i believe is what rover measured it out to when he was complaining about carrier caps.

That's strange. I use Public Radio Live Stream to listen to my local NPR station 30 minutes each way every business day, and the data usage on my last bill was just under 1gb total. I also use Google Navigation a lot and during the baseball season I stream a lot of MLB At-Bat live audio, and I've never gotten over 1.5gb. Whenever there is a post about data caps, I never pay it much attention, figuring that with the data amount I accumulate with my regular usage, those getting near the cap are actually data abusers that should be capped. However, if other streaming programs use a lot more data, then perhaps I'm just lucky with the programs I use? If data caps threatened my ability to stream, that would basically eliminate the primary purpose of my phone.

Anyway, back on topic, I'd love to see a working radio. The only reason I stream my local NPR station on my phone is because the radio in my car gets terrible reception. My wife's car pick's up the station perfectly. If the phone has halfway decent reception, I'd use it instead of the streaming app.

[KSmithInNY]

That's strange. I use Public Radio Live Stream to listen to my local NPR station 30 minutes each way every business day, and the data usage on my last bill was just under 1gb total. I also use Google Navigation a lot and during the baseball season I stream a lot of MLB At-Bat live audio, and I've never gotten over 1.5gb. Whenever there is a post about data caps, I never pay it much attention, figuring that with the data amount I accumulate with my regular usage, those getting near the cap are actually data abusers that should be capped. However, if other streaming programs use a lot more data, then perhaps I'm just lucky with the programs I use?

If i remember right, and this may have changed, iheartradio streams at 64 kbps, which translates roughly into 3.75MB per minute, which translates roughly into 225MB per hour. Listening to RMG every weekday for a month over iheartradio would be around 18gb if my math is correct. I really wish we had a good data calculator on these things so it could be more exact :\

Even if it was 32kbps thats still 9gb, You can see why I want FM radio lol

[zefie]

my bill never tallies my data usage right. once i wifi tethered over 2gb and it showed up as 500mb on the bill. lol

[ccrs8]

my bill never tallies my data usage right. once i wifi tethered over 2gb and it showed up as 500mb on the bill. lol

That's what I'm leaning towards after looking more closely at my usage. Even at the lowest kbps (don't need a lot of kbps to convey the monotone NPR hosts' voices), there's no way I can stream an hour a day, 20 days a month (not including any additional streaming and data usage) and stay at around 1gb a month. If they ever do tier or cap data, I sure hope they stick to the calculating method they are using now.

[trekkie1701c]

Wouldn't mind being able to listen to local radio on this thing :P

Anyways one note on Bandwidth/caps with Sprint - there is not official cap as far as I can tell. When I got my first Sprint phone (a Palm Centro) I'd heard that the cap was 5gb, however I passed that many, many times, by quite a bit (I think my top is about 15gb in a month). My connection speed did go down to 10kbps at one point and it may have been Sprint throttling the connection... however I doubt they actually pushed it to that low of a level, as the Centro capped out at 30kpbs for me on a 3g network (blamed the low speed on Sprint til I got my Optimus :P). Don't think there will be a major issue with using a lot of data.

As for tallies, it's always seemed right when I checked, though since I have an unlimited plan I've never worried about checking it frequently.

[zefie]

I don't check it often, sometimesI just get curious. The only thing not unlimited is anytime minutes so sometimes I am just curious how many txt's we send or data we used. It's never accurate on my account lol.

5gb is supposed to be for data cards and legit tethering. Device-only data is supposed to be unlimited, but heh, all unlimited internet has some sort of threshold. Cable is 50gb-250gb, EVDO is probably 5-50gb.

Obviously Sprint would be pretty ticked off if you used like 1TB But for most people they aren't going to make a stink if you have a smartphone and go over 5gb.

[zefie]

Tried working on this again today. Still can't figure out why bluetooth_fm_receiver_service is "not enabled" and where to enable it.

I copied the entire com.broadcom code from the P500's framework to ours, so the fact that it says "DO NOT START FM SERVICE" in the smali cannot be the problem, because it would do the same on the P500.

There has to be some configuration SOMEWHERE that tells the service to enable, but I just can't find it. I looked in all the framework, all of /etc, even bin and lib.. and the APKs. I must be missing something.

[KSmithInNY]

Tried working on this again today. Still can't figure out why bluetooth_fm_receiver_service is "not enabled" and where to enable it.

I copied the entire com.broadcom code from the P500's framework to ours, so the fact that it says "DO NOT START FM SERVICE" in the smali cannot be the problem, because it would do the same on the P500.

There has to be some configuration SOMEWHERE that tells the service to enable, but I just can't find it. I looked in all the framework, all of /etc, even bin and lib.. and the APKs. I must be missing something.

I believe it's in the kernel. The answer is gonna be in the kernel (my guess).

[zefie]

C:\Users\zefie>adb shell dmesg | grep -i fm
<6>[ 7.393071] snd_set_fm_radio_volume 1
<6>[ 29.410538] snd_set_fm_radio_volume 4

idk the kernel seems to acknowledge something.

Interesting logcat:

This is when turning bluetooth on.

I/bluedroid( 1738): BTOFF_FMOFF_handling
I/bluedroid( 1738): BTOFF_FMOFF_handling : receiving BT_ON
I/BTAPP_FM( 7033): BTAPP_FM: Initialized IFS (res = 6)
I/BTL-IFS ( 7033): BTL_IF_RegisterSubSystem: Registered subsystem [FM]
I/BTAPP_FM( 7033): BTAPP_FM: Registered IFS (res = 0)
I/bluedroid( 1738): New state is BTON_FMOFF_handling
W/BluetoothServiceManager( 1738): DO NOT START FM SERVICE!!!!
D/BluetoothServiceManager( 1738): ***startService(): Bluetooth service bluetooth
_fm_receiver_service not enabled. Skipping...***

edit:
scanned P500 code for FMOFF FMON, found /system/lib/libbluedroid.so.. trying stuff

edit2: get this now
I/BTAPP_FM( 1961): BTAPP_FM: Initialized IFS (res = 6)
I/BTL-IFS ( 1961): BTL_IF_RegisterSubSystem: Registered subsystem [FM]
I/BTAPP_FM( 1961): BTAPP_FM: Registered IFS (res = 0)

but still no radio and still complaining service not enabled.
not listed in service list

yet when i disable BT

W/BluetoothServiceManager( 1715): DO NOT STOP FM SERVICE!!!!
D/BluetoothServiceManager( 1715): ***stopService(): Stopping service: bluetooth_
fm_receiver_service***
V/FmReceiverEventLoop( 1715): stop
D/FmReceiverEventLoop( 1715): stopFM_Loop()
V/FmReceiverEventLoop( 1715): getName
D/BluetoothServiceManager( 1715): Finishing service bluetooth_fm_receiver_servic
e
D/OppReceiver( 2300): SVC NAME=bluetooth_fm_receiver_service
I/BTL-IFS ( 2408): BTL_IF_UnregisterSubSystem: Unregistered subsystem [FM]

Getting closer.

[KSmithInNY]

Now that it's not complaining about BT ... are you trying this with headphones plugged in? If not, try it.

[zefie]

Now that it's not complaining about BT ... are you trying this with headphones plugged in? If not, try it.

of course, it wouldn't even get that far. And it is still complaining the service isn't running, yet its shutting down this non-running service when i turn off BT.

Nothing in the logs (logcat verbose or dmesg) show any errors. Hmm.

[KSmithInNY]

of course, it wouldn't even get that far. And it is still complaining the service isn't running, yet its shutting down this non-running service when i turn off BT.

Nothing in the logs (logcat verbose or dmesg) show any errors. Hmm.

hmmmm a mystery wrapped in an enigma.

[zefie]

I copied the entire bluetooth stack from the P500 (which also needs liblgdrm*) but still nothing. alot of stuff in logcat now though need to go through it.

I/ActivityManager( 1714): Start proc com.android.bluetooth for broadcast com.android.bluetooth/com.broadcom.bt.app.opp.OppReceiver: pid=2255 uid=10051 gids={3003, 3002, 3001, 1015}
I//system/bin/btld( 2374): gki_alloc_free_queue ret OK, id:3  size:1712, totol:50
I//system/bin/btld( 2374): gki_alloc_free_queue in, id:2 
I//system/bin/btld( 2374): gki_alloc_free_queue calling  gki_init_free_queue, id:2  size:660, totol:45
I//system/bin/btld( 2374): gki_alloc_free_queue ret OK, id:2  size:660, totol:45
I//system/bin/btld( 2374): gki_alloc_free_queue in, id:0 
I//system/bin/btld( 2374): gki_alloc_free_queue calling  gki_init_free_queue, id:0  size:64, totol:48
I//system/bin/btld( 2374): gki_alloc_free_queue ret OK, id:0  size:64, totol:48
V/BTL_CFG ( 2375): btl_cfg_get_soft_onoff_enabled : service.brcm.bt.soft_onoff = 0
I//system/bin/btld( 2374): userial_change_rate: Closing UART Port
I/BTL-SERVER( 2375): bte_main_rln_cplt: patchfile over-ride /system/bin/BCM4325D1_004.002.004.0218.0248.hcd
I/BTL-SERVER( 2375): bte_main_rln_cplt: Downloading patchfile /system/bin/BCM4325D1_004.002.004.0218.0248.hcd
I/BTLD    ( 2375): BCM2045_PRM_Init
I//system/bin/btld( 2374): gki_alloc_free_queue in, id:1 
I//system/bin/btld( 2374): gki_alloc_free_queue calling  gki_init_free_queue, id:1  size:288, totol:26
I//system/bin/btld( 2374): gki_alloc_free_queue ret OK, id:1  size:288, totol:26
I/BTLD    ( 2375): Minidrv download completed
E/BTLD    ( 2375): [hcis] Unknown HCI message type drop this byte 0x34
E/BTLD    ( 2375): [hcis] Unknown HCI message type drop this byte 0x31
I/BTLD    ( 2375): Launch RAM successful
I//system/bin/btld( 2374): userial_change_rate: Closing UART Port
I//system/bin/btld( 2374): userial_change_rate: Closing UART Port
I/BTL-SERVER( 2375): Setting local bd addr to 5C:17:D3:3E:98:C4
V/BTL_CFG ( 2375): btl_cfg_get_soft_onoff_enabled : service.brcm.bt.soft_onoff = 0
V/BTL_CFG ( 2375): btl_cfg_get_soft_onoff_enabled : service.brcm.bt.soft_onoff = 0
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [DTUN]
I/BTAPP_FM( 2375): BTAPP_FM: Initialized IFS (res = 6)
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [FM]
I/BTAPP_FM( 2375): BTAPP_FM: Registered IFS (res = 0)
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [TEST]
I/BTL_CFG ( 2375): btl_cfg_get_btport_redirection_enable: service.brcm.bt.btport_redir_on=
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [DUN]
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [SPP]
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [AG]
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [SCO]
I/BTA_AG_CO: ( 2375): bta_ag_co_init: ag_voice_settings = 96
I/BTA_AG_CO: ( 2375): bta_ag_co_init: ag_vsc_sco_pcm(0x18201b) = {0, 4, 0, 0, 0}
I/BTA_AG_CO: ( 2375): bta_ag_co_init: ag_vsc_pcm_config(0x182016) = {0, 0, 3, 3, 0}
I/BTL-BTAPP_OPC:( 2375): **** Starting DTUN [OPC] Interface ****
I/BTL-BTAPP_OPS:( 2375): OPS Supported Formats = 0x45
I/BTL-BTAPP_OPS:( 2375): OPS event:0
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [FTPS]
I/BTAPP_PR:( 2375): Initialized IFS (res = 6)
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [PR]
I/BTAPP_PR:( 2375): Registered IFS (res = 0)
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [SAPS]
I/BTAPP_SC:( 2375): btapp_sc_init: result = 0, btl_if_handle = 14
I/BTL-BTAPP_AV( 2375): AVRCP enabled
I/BTL-BTAPP_AV( 2375): Advanced Audio enabled
D/BTAPP_PBS:( 2375): btapp_pbs_init IFS init result = 6
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystem: Registered subsystem [PBS]
D/BTAPP_PBS:( 2375): BTL_IF_RegisterSubSystem result = 0 btl_if_pbs_handle = 8
I/        ( 2375): btapp_bts_init: btapp_bts_init
I/BTL-IFS ( 2375): BTL_IF_RegisterSubSystemMultiClnt: Registered subsystem [BTS]
D/        ( 2375): jvapi_if_dm_cback: #### jw_if_dm_cback ev BTA_JV_ENABLE_EVT ####
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (14)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem DTUN (14) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 14)
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14)
I//system/bin/btld( 2374): 		btapp_dm_GetLocalInfo()
I//system/bin/btld( 2374): 		btapp_dm_SetName()
I//system/bin/btld( 2374): 		btapp_dm_SetMode()
I//system/bin/btld( 2374): 		btapp_dm_AddDev()
I//system/bin/btld( 2374): 		btapp_dm_AddDev()
D/BT HSHFP( 1818): Loaded priority 00:19:7F:39:B9:A3 = 1003
D/BT HSHFP( 1818): Loaded priority 00:02:72:A0:EF:E6 = 1002
I/BTL_IFC ( 1818): BTL_IFC_RegisterSubSystem: Register subsystem [AG]
I/BTL_IFC ( 1818): btl_ifc_ctrl_connect: Connect control channel for subsystem [AG]
D/BTL_IFC_WRP( 1818): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1818): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
I/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: Register subsystem [SPP]
I/BTL_IFC ( 1714): btl_ifc_ctrl_connect: Connect control channel for subsystem [SPP]
D/BTL_IFC_WRP( 1714): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1714): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP( 1714): wrp_sock_create: 112
D/BTL_IFC_WRP( 1714): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (112)
D/BTL_IFC_WRP( 1818): wrp_sock_create: 34
D/BTL_IFC_WRP( 1818): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (34)
D/BTL_IFC_WRP( 1818): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (15)
I/BTL_IFC_WRP( 1818): wrp_sock_connect: Connected. (34)
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (AG) 0 pbytes (hdl 34)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem AG (15) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 15)
D/BTL_IFC ( 1818): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
I/BLZ_WRAPPER( 1818): btl_if_socket: btl_if_socket :: fam 31, type 1, proto 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: AG
D/BTL_IFC_WRP( 1818): wrp_alloc_new_sock: wrp_alloc_new_sock sub 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: 44
D/BLZ_WRAPPER( 1818): btl_if_setsockopt: btl_if_setsockopt level:18, optname:3
I/BLZ_WRAPPER( 1818): btl_if_setsockopt: configure rfcomm lm mode
D/BLZ_WRAPPER( 1818): btl_if_bind: [btl_if_bind] : (44:-1), disc_pending 0, asnc 0, selct 0, flags 0
I/BLZ_WRAPPER( 1818): btl_if_bind: btl_if_bind : [rfc] rc chan 10, bd[0:0]
D/BTL_IFC_WRP( 1818): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9017
D/BTL_IFC_WRP( 1818): wrp_sock_bind: wrp_sock_bind:socket_local_server_bind result:0 server_name:brcm.bt.dtun.9017
D/BTL_IFC_WRP( 1818): wrp_sock_bind: socket_local_server_bind on port 9017
D/BTL_IFC ( 1818): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_LISTEN_REQ (AG) 8 pbytes (hdl 34)
D/BLZ_WRAPPER( 1818): btl_if_listen: [btl_if_listen] : (44:-1), disc_pending 0, asnc 0, selct 0, flags 0
D/BLZ_WRAPPER( 1818): btl_if_listen: btl_if_listen : fd 44 [brcm.bt.dtun]
D/BTL_IFC_WRP( 1818): wrp_sock_listen: wrp_sock_listen : fd 44 brcm.bt.dtun:9017
I/BLZ_WRAPPER( 1818): btl_if_socket: btl_if_socket :: fam 31, type 1, proto 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: AG
D/BTL_IFC_WRP( 1818): wrp_alloc_new_sock: wrp_alloc_new_sock sub 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: 45
D/BLZ_WRAPPER( 1818): btl_if_setsockopt: btl_if_setsockopt level:18, optname:3
I/BLZ_WRAPPER( 1818): btl_if_setsockopt: configure rfcomm lm mode
D/BLZ_WRAPPER( 1818): btl_if_bind: [btl_if_bind] : (45:-1), disc_pending 0, asnc 0, selct 0, flags 0
I/BLZ_WRAPPER( 1818): btl_if_bind: btl_if_bind : [rfc] rc chan 11, bd[0:0]
D/BTL_IFC_WRP( 1818): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9018
D/BTL_IFC_WRP( 1818): wrp_sock_bind: wrp_sock_bind:socket_local_server_bind result:0 server_name:brcm.bt.dtun.9018
D/BTL_IFC_WRP( 1818): wrp_sock_bind: socket_local_server_bind on port 9018
D/BTL_IFC ( 1818): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_LISTEN_REQ (AG) 8 pbytes (hdl 34)
D/BTL_IFC_WRP( 1714): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (16)
I/BTL_IFC_WRP( 1714): wrp_sock_connect: Connected. (112)
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (SPP) 0 pbytes (hdl 112)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem SPP (16) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 16)
D/BLZ_WRAPPER( 1818): btl_if_listen: [btl_if_listen] : (45:-1), disc_pending 0, asnc 0, selct 0, flags 0
D/BLZ_WRAPPER( 1818): btl_if_listen: btl_if_listen : fd 45 [brcm.bt.dtun]
D/BTL_IFC_WRP( 1818): wrp_sock_listen: wrp_sock_listen : fd 45 brcm.bt.dtun:9018
D/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
I/BrcmBtServiceLoader( 1714): ***Received Bluetooth ON Event****
I/BTL_IFC ( 1818): BTL_IFC_RegisterSubSystem: Register subsystem [SCO]
I/BTL_IFC ( 1818): btl_ifc_ctrl_connect: Connect control channel for subsystem [SCO]
D/BTL_IFC_WRP( 1818): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1818): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP( 1818): wrp_sock_create: 46
D/BTL_IFC_WRP( 1818): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (46)
D/BTL_IFC_WRP( 1818): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (17)
I/BTL_IFC_WRP( 1818): wrp_sock_connect: Connected. (46)
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (SCO) 0 pbytes (hdl 46)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem SCO (17) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 17)
D/BTL_IFC ( 1818): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
I/bluetooth_ScoSocket.cpp( 1818): BTL_IFC_RegisterSubSystem SUB_SCO chdl:0x2e
E/ScoSocket( 1818): [BTUI] [### SCO ###] doAccept()... mState(2) [1:READY/2:ACCEPT/3:CONNECTING/4:CONNECTED/5:CLOSED]
D/com_broadcom_bt_service_ftp_FTPService.cpp( 1714): enableDefaultFtpServerNative
I/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: Register subsystem [FTPS]
I/BTL_IFC ( 1714): btl_ifc_ctrl_connect: Connect control channel for subsystem [FTPS]
D/BTL_IFC_WRP( 1714): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1714): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP( 1714): wrp_sock_create: 113
D/BTL_IFC_WRP( 1714): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (113)
D/BTL_IFC_WRP( 1714): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (18)
I/BTL_IFC_WRP( 1714): wrp_sock_connect: Connected. (113)
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (FTPS) 0 pbytes (hdl 113)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem FTPS (18) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 18)
D/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
D/BTL_IFC ( 1714): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_FTPS_ENABLE (FTPS) 0 pbytes (hdl 113)
D/com_broadcom_bt_service_pbap_PBAPService.cpp( 1714): enableDefaultPbapServerNative
I/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: Register subsystem [PBS]
I/BTL_IFC ( 1714): btl_ifc_ctrl_connect: Connect control channel for subsystem [PBS]
D/BTL_IFC_WRP( 1714): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1714): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP( 1714): wrp_sock_create: 114
D/BTL_IFC_WRP( 1714): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (114)
D/BTL_IFC_WRP( 1714): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL_IFC_WRP( 1714): wrp_sock_connect: Connected. (114)
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (PBS) 0 pbytes (hdl 114)
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_FTPS_ENABLE_EVT (FTPS) 0 pbytes (hdl 18)
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (19)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem PBS (19) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 19)
D/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
D/BTL_IFC ( 1714): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_PBS_ENABLE (PBS) 0 pbytes (hdl 114)
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_PBS_ENABLE_EVT (PBS) 0 pbytes (hdl 19)
I/BTL_IFC ( 1714): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_FTPS_ENABLE_EVT (FTPS) 2 pbytes (hdl 113)
I/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: Register subsystem [DUN]
I/BTL_IFC ( 1714): btl_ifc_ctrl_connect: Connect control channel for subsystem [DUN]
D/BTL_IFC_WRP( 1714): wrp_sock_create: CTRL
D/BTL_IFC_WRP( 1714): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP( 1714): wrp_sock_create: 115
D/BTL_IFC_WRP( 1714): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9000 (115)
D/BTL_IFC_WRP( 1714): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9000
I/BTL-IFS ( 2375): main_server_thread: [CTRL] Client connected (20)
I/BTL_IFC_WRP( 1714): wrp_sock_connect: Connected. (115)
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ (DUN) 0 pbytes (hdl 115)
I/BTL-IFS ( 2375): attach_client: ######## Attached client subsystem DUN (20) ######## 
D/BTL-IFS ( 2375): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 20)
D/BTL_IFC ( 1714): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
I/service_dun_BluetoothDUNService.cpp( 1714): enableNative: BTL_IFC enable result = 0
D/BTL_IFC ( 1714): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1714): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_DG_ENABLE (DUN) 0 pbytes (hdl 115)
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DG_LISTEN_EVT (DUN) 1 pbytes (hdl 20)
I/BTAPP_DG:( 2375): bta_dg_dun_ports_have_state(enable): port 0 hdl = 1
I/BTAPP_DG:( 2375): bta_dg_dun_ports_have_state() returning TRUE
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DG_ENABLE_EVT (DUN) 0 pbytes (hdl 20)
I/BTL_IFC ( 1714): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_PBS_ENABLE_EVT (PBS) 2 pbytes (hdl 114)
D/com_broadcom_bt_service_pbap_PBAPService.cpp( 1714): #### handlePbapEvent 0xad3f8656 ####
D/com_broadcom_bt_service_pbap_PBAPService.cpp( 1714): ### PBAP Enabled ####
I/BTL_IFC ( 1714): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_DG_LISTEN_EVT (DUN) 3 pbytes (hdl 115)
I/service_dun_BluetoothDUNService.cpp( 1714): btlif_rx_ctrl(handle: 115, id: 4524)
I/service_dun_BluetoothDUNService.cpp( 1714): [BTLIF_DUN_LISTEN_EVT]: app_id: 5
E/BluetoothDUNService( 1714): [BTUI] [DUN:5] : BtUiDunStateChanged = state(1)
I/BTL_IFC ( 1714): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_DG_ENABLE_EVT (DUN) 2 pbytes (hdl 115)
I/service_dun_BluetoothDUNService.cpp( 1714): btlif_rx_ctrl(handle: 115, id: 4522)
I/service_dun_BluetoothDUNService.cpp( 1714): [BTLIF_DG_ENABLE_EVT]
D/OppReceiver( 2255): Received action: broadcom.bt.intent.action.BT_SVC_STATE_CHANGE
D/OppReceiver( 2255): Received action: broadcom.bt.intent.action.BT_SVC_STATE_CHANGE
D/OppReceiver( 2255): Received action: broadcom.bt.intent.action.BT_SVC_STATE_CHANGE
I/BTL-BTAPP_OPS:( 2375): btapp_op_set_exchange_folder(/mnt/sdcard/bluetooth/)
I/BTL-BTAPP_OPS:( 2375): btapp_op_set_owner_vcard(/data/data/com.android.bluetooth/.tmp/op_default.vcf)
D/OppReceiver( 2255): Received action: broadcom.bt.intent.action.BT_SVC_STATE_CHANGE
D/OppReceiver( 2255): Received action: broadcom.bt.intent.action.BT_SVC_STATE_CHANGE
D/OPPServerService( 2255): [main/1] onStartCommand():intent,flags,startid=Intent { act=brcm.rst cmp=com.android.bluetooth/com.broadcom.bt.app.opp.server.OPPServerService },0,1
D/OPPBaseService( 2255): [main/1] onProxyAvailable(). Proxy object = com.broadcom.bt.service.opp.BluetoothOPP@45f54540
W/CachedBluetoothDevice( 1824): [BTUI] [Q] processCommand()... CONNECT
I/BT HSHFP( 1818): connectHeadset: device = 00:02:72:A0:EF:E6
D/BT HSHFP( 1818): Headset state 0 -> 1, result = 1
D/BT HSHFP( 1818): Saved priority 00:02:72:A0:EF:E6 = 1000
D/BT HSHFP( 1818): SDP UUID: TYPE_HEADSET
I/BLZ_WRAPPER( 1818): btl_if_socket: btl_if_socket :: fam 31, type 1, proto 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: AG
D/BTL_IFC_WRP( 1818): wrp_alloc_new_sock: wrp_alloc_new_sock sub 3
D/BTL_IFC_WRP( 1818): wrp_sock_create: 47
D/BLZ_WRAPPER( 1818): btl_if_setsockopt: btl_if_setsockopt level:18, optname:3
I/BLZ_WRAPPER( 1818): btl_if_setsockopt: configure rfcomm lm mode
I/BT HSHFP CPP( 1818): Created RFCOMM socket fd 47.
D/BLZ_WRAPPER( 1818): btl_if_connect: [btl_if_connect] : (47:-1), disc_pending 0, asnc 0, selct 0, flags 802
I/BLZ_WRAPPER( 1818): btl_if_connect: btl_if_connect : rf_chan 8, bd[2:0]
D/BLZ_WRAPPER( 1818): btl_if_connect: set async pending, return EINPROGRESS and send connect req...
D/BTL_IFC ( 1818): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_CONNECT_REQ (AG) 8 pbytes (hdl 34)
I/BT HSHFP CPP( 1818): async connect is in progress (Operation now in progress)
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
W/BTLD    ( 2375): btm_dev_timeout( timeout_reason: x1 )::devcb.state: 5
W/BTLD    ( 2375): info:x10
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14)
I/BT HSHFP( 1818): ACL connected
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
W/BTLD    ( 2375): process_service_search_attr_rsp
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
W/BTLD    ( 2375): process_service_search_attr_rsp
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 1, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async pending, sleep [0 s, 500000 us]
W/BTLD    ( 2375): process_service_search_attr_rsp
W/BTLD    ( 2375): new conn_srvc id:5, app_id:0
W/BTLD    ( 2375): bta_dm_pm_ssr conn_srvc id:5, app_id:0
W/BTLD    ( 2375): bta_dm_pm_ssr:2, lat:1200
I/BTL-IFS ( 2375): BTL_IF_SetupListener: [BTL_IFS] setup datachannel listener [AG], sub_port 8
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_CONNECT_RSP (AG) 4 pbytes (hdl 15)
I/BTL_IFC ( 1818): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_CONNECT_RSP (AG) 6 pbytes (hdl 34)
D/BLZ_WRAPPER( 1818): blz_ctrl_msg: [blz ctrl] received message [BTLIF_CONNECT_RSP]
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 0
D/BLZ_WRAPPER( 1818): btl_if_select: [btl_if_select] : (47:-1), disc_pending 0, asnc 4102, selct 0, flags 802
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : async connection completed, check result
D/BTL_IFC_WRP( 1818): wrp_sock_connect: wrp_sock_connect brcm.bt.dtun:9015 (47)
D/BTL_IFC_WRP( 1818): DTUN_MAKE_LOCAL_SERVER_NAME return name: brcm.bt.dtun.9015
I/BTL-IFS ( 2375): btl_if_notify_local_event: Notify local event BTLIF_DATA_CHAN_IND
I//system/bin/btld( 2374): btl_ifs: calling accept() listen socket:21
I//system/bin/btld( 2374): btl_ifs:wrp_data_accept() accept local socket:22
I/BTL_IFC_WRP( 1818): wrp_sock_connect: Connected. (47)
D/BLZ_WRAPPER( 1818): btl_if_select: btl_if_select : transparant mode, result 1
I/BT HSHFP CPP( 1818): select() timeout = 500 returned 1
I/BT HSHFP CPP( 1818): Successful RFCOMM socket connect.
D/BT HSHFP( 1818): RFCOMM connection attempt took 4028 ms
D/BT HSHFP( 1818): Rfcomm connected
D/BT HSHFP( 1818): Headset state 1 -> 2, result = 1
E/AudioService( 1714): [BTUI] onReceive() : [HEADSET] is connected => [put] mConnectedDevices
W/StatusBarPolicy( 1714): [BTUI] Profile State [AG:2 AV:false FTP:0 PBAP:0 DUN:0]
W/CachedBluetoothDevice( 1824): [BTUI] [Q] processCommand()... CONNECT
D/BT HSHFP( 1818): Saved priority 00:02:72:A0:EF:E6 = 1004
E/BTLD    ( 2375): reset flags
W/StatusBarPolicy( 1714): [BTUI] Profile State [AG:2 AV:false FTP:0 PBAP:0 DUN:0]
W/BTLD    ( 2375): process_service_search_attr_rsp
E/BTLD    ( 2375): bta_av_rc_create ACP handle exist for shdl:0
W/BTLD    ( 2375): bta_dm_rm_cback:0, status:0
W/BTLD    ( 2375): new conn_srvc id:18, app_id:0
W/BTLD    ( 2375): bta_dm_pm_ssr conn_srvc id:5, app_id:0
W/BTLD    ( 2375): bta_dm_pm_ssr conn_srvc id:18, app_id:0
W/BTLD    ( 2375): bta_dm_pm_ssr:2, lat:1200
W/BTLD    ( 2375): ### :: codec open ::
W/BTLD    ( 2375): ### mtu 512, 660 bytes/frame, bitrate 229, nbr ch 0, freq 240
W/BTLD    ( 2375): ### alloc : 3, blk len 240, chmode:15, bitpool 32:2, subbands 12
W/BTLD    ( 2375): ###
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 44 pbytes (hdl 14)
E/BluetoothA2dpService( 1714): [BTUI] onSinkPropertyChanged() : oState(1) nState(2) priority(1000)
W/StatusBarPolicy( 1714): [BTUI] Profile State [AG:2 AV:true FTP:0 PBAP:0 DUN:0]
W/BTLD    ( 2375): process_service_search_attr_rsp
W/BTLD    ( 2375): dm_pm_timer expires
W/BTLD    ( 2375): dm_pm_timer expires 0
W/BTLD    ( 2375): proc dm_pm_timer expires
W/CachedBluetoothDevice( 1824): [BTUI] [Q] processCommand()... DISCONNECT
D/BT HSHFP( 1818): Saved priority 00:02:72:A0:EF:E6 = 100
I/BLZ_WRAPPER( 1818): btl_if_close: btl_if_close (47)
D/BLZ_WRAPPER( 1818): btl_if_close: [btl_if_close] : (47:-1), disc_pending 0, asnc 0, selct 0, flags 2
D/BTL_IFC ( 1818): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC ( 1818): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_DISCONNECT_REQ (AG) 2 pbytes (hdl 34)
D/BTL_IFC_WRP( 1818): wrp_close_s_only: wrp_close_s_only [47] (47:-1) [brcm.bt.dtun]
D/BTL_IFC_WRP( 1818): wrp_close_s_only: data socket closed
D/BTL_IFC_WRP( 1818): wsactive_del: delete wsock 47 from active list [ad3b0250]
I/BTL-IFS ( 2375): btl_if_notify_local_event: Notify local event BTLIF_DATA_CH_DISC_IND
D/BTL_IFC_WRP( 1818): wrp_close_s_only: wsock fully closed, return to pool
D/BT HSHFP( 1818): Headset state 2 -> 0, result = 2
W/StatusBarPolicy( 1714): [BTUI] Profile State [AG:0 AV:true FTP:0 PBAP:0 DUN:0]
W/CachedBluetoothDevice( 1824): [BTUI] [Q] processCommand()... DISCONNECT
E/BTLD    ( 2375): bta_av_str_stopped:audio_open_cnt=1
W/BTLD    ( 2375): bta_dm_rm_cback:1, status:6
W/BTLD    ( 2375): new conn_srvc id:18, app_id:1
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DISCONNECT_RSP (AG) 2 pbytes (hdl 15)
I/BTL_IFC ( 1818): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_DISCONNECT_RSP (AG) 4 pbytes (hdl 34)
D/BLZ_WRAPPER( 1818): blz_ctrl_msg: [blz ctrl] received message [BTLIF_DISCONNECT_RSP]
W/BTLD    ( 2375): bta_dm_rm_cback:1, status:1
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 44 pbytes (hdl 14)
E/BluetoothA2dpService( 1714): [BTUI] onSinkPropertyChanged() : oState(3) nState(0) priority(100)
I/BTL-IFS ( 2375): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 11 pbytes (hdl 14)
W/BTLD    ( 2375): btui_security_cback( LINK FAILURE:: hci status: 19) 8==link super to
W/BTLD    ( 2375): for bd_addr: x00:x02:x72:xa0:xef:xe6
I/BT HSHFP( 1818): ACL disconnected
W/BTLD    ( 2375): dm_pm_timer expires
W/BTLD    ( 2375): dm_pm_timer expires 0
W/BTLD    ( 2375): proc dm_pm_timer expires

Edit: too annoyed at this to continue it. hopefully someone with more patience than I could get it to work.