Results 1 to 24 of 24
  1. Thread Author  Thread Author    #1  

    Default droid x stuck in bootloop, RSD won't recognize.

    I went to go from liberty 1.5 to the new leak of gingerbread and forgot to do a wipe before flashing gingerbread on so my phone is stuck in bootloop. can't get it to boot into clockwork or normal recovery mode.

    I downloaded the .sbf and RSD lite but since my phone is stuck in the loop my computer can't recognize it, thus RSD lite isn't really an option.


    any ideas?
  2. #2  

    Default

    Did you NOT read the instructions?

    Installing Firmware

    1. Download this file from the TBH app or one of the mirrors below
    2. Use Bootstrap to get your phone into recovery.
    3. Create a backup (This is not compatible with new firmware)
    4. Install the Firmware using recovery
    1. select install zip from sdcard
    2. choose zip from sdcard
    3. navigate to teamblackhat folder
    4. select the file you downloaded
    5. Restart phone

    If your phone bootloops you need to enter recovery and wipe data:

    1. hold down power and home.
    2. when you see the triangle hold down both volume buttons
    3. select wipe data/factory reset ---press power button to select
    4, reboot system
    Thanked by:
  3. Thread Author  Thread Author    #3  

    Default

    yeah I read it, I've done this a million times, except this is the only time I've failed to do it correctly.


    I can't get into recovery which is the problem.
    I hold down home and power then the triangle with ! pops up, but when I hit search nothing happens. it just sits at that screen,
  4. #4  

    Default

    Try a battery pull. When powering up after inserting, make sure to hold down the home key.
  5. Thread Author  Thread Author    #5  

    Default

    pulled the battery a bunch of times.
    tried booting into recovery a bunch of times.
    tried getting my computer to recognize it so I can use RSDlite to flash the sbf a bunch of times also.


    nothing. never seen it bricked so bad.
  6. #6  

    Default

    Are you in the bootloader screen when you're trying to use RSDlite?

    For how long are you leaving out the battery when you're pulling it?
  7. Thread Author  Thread Author    #7  

    Default

    no because I can't even get my phone to the bootloader screen, and atleast 30 seconds.

    my most recent pull it was sitting out for 2-3 minutes.
  8. #8  

    Default

    Wait. The triangle pops up and then what? You hit the search key?
  9. Thread Author  Thread Author    #9  

    Default

    yeah I hit the search key, nothing happens.

    tried it at least ten times, as well as hitting every other key on the phone incase I was reading "search" wrong.
  10. #10  

    Default

    DON'T hit the search key. That doesn't work anymore.

    2. when you see the triangle hold down both volume buttons
    3. select wipe data/factory reset ---press power button to select
    4, reboot system
    Thanked by 2:
    kajiiKOBALT 
  11. Thread Author  Thread Author    #11  

    Default

    I love you.


    fixed it.
  12. #12  

    Default

    The same thing happened to me! My droid x was stuck at the boot logo and I did the factory reset and wiped everything but it still didn't work. Then I downloaded all of the .sbf and rsb lite stuff, started the program and got .sbf onto it, but when I put my droid x into recovery mode and tried to connect it, nothing happened. the computer didn't acknowledge that it was connected.
  13. #13  

    Default

    Understandable. It's a new stock recovery and the buttons don't work the same anymore (or at all). I had to wipe and tried using the camera button, but then I remembered that button doesn't work in the new recovery. Time to learn something new!
  14. #14  

    Default

    So, I finally have everything ready. except when my Droid X connects, my computer pops up this window that tries to install software onto the X or let me disconnect it. How do I get past this?
  15. #15  

    Default

    do you have to rename the zip file to update.zip before running it?
  16. #16  

    Default

    No. Just choose it from the team black hat folder.
  17. #17  
    cj100570's Avatar
    Spoken Word™

    Posts
    368 Posts
    Global Posts
    409 Global Posts
    ROM
    Jelly Bean

    Default

    Reading Is Fundamental....
  18. #18  

    Default

    Quote Originally Posted by ultravisitor View Post
    Understandable. It's a new stock recovery and the buttons don't work the same anymore (or at all). I had to wipe and tried using the camera button, but then I remembered that button doesn't work in the new recovery. Time to learn something new!
    Correct the camera button won't work. To get into the bootloader screen to flash sbf you have to hold both of the volume buttons down and then press the power button.
  19. #19  

    Default rsd

    Make sure you're on rsd 4.8. Had similar problems until I updated to 4.8. Went off without a hitch after the upgrade.
  20. #20  
    pauliphone5's Avatar

    Posts
    2,554 Posts
    Global Posts
    2,563 Global Posts
    ROM
    ICS 4.0.4

    Default

    I've got rsd 4.8 and it isn't recognizing my X.
  21. #21  
    kajii's Avatar

    Posts
    401 Posts
    Global Posts
    407 Global Posts
    ROM
    AOKP, Stock

    Default

    Quote Originally Posted by ultravisitor View Post
    DON'T hit the search key. That doesn't work anymore.

    2. when you see the triangle hold down both volume buttons
    3. select wipe data/factory reset ---press power button to select
    4, reboot system
    thanks for that... soooooooooooooooo much thanks
  22. #22  

    Default

    i also have this problem. I get into recovery and wipe data/reset and have rebooted same loop. Can't get rsd lite to show phone. when I try to load update from zip it fails signiture. Any suggestions.
  23. #23  
    techjpo's Avatar

    Posts
    44 Posts
    Global Posts
    47 Global Posts

    Default

    Be sure to put the phone in bootloader if trying to sbf, then make sure that in RSD Lite that "administrator" is checked off. Check the other post on RSD not recognizing the phone.
  24. #24  

    Default

    Quote Originally Posted by ultravisitor View Post
    DON'T hit the search key. That doesn't work anymore.

    2. when you see the triangle hold down both volume buttons
    3. select wipe data/factory reset ---press power button to select
    4, reboot system
    I joined this forum for the sole purpose of thanking you for the above post. You have no idea how much you've helped me. I'll continue to browse through the wealth of knowledge that's here. Hopefully, I can return the favor one day. I'm still new at this

Posting Permissions