| || |
[GUIDE] Optimus V ZVJ
For those who are not the best with reprogramming an entire phone: http://forums.androidcentral.com/opt...optimus-v.html
For advanced users that like advanced stuff
Read everything before attempting, make sure you are comfortable with these programs.
(There are more later in the guide.)
Ok, before you start saying data won't work, it WILL work. I have tested this myself with an Optimus V ZV4 baseband. Now what won't work is MMS, which is why we have this thread: Porting Optimus S ZVJ ROMs to Optimus V ZVJ
Support for the Optimus V on ZVJ is in that thread, which is why it was created.
Now to get LGNPST set up:
What You Need:
- Drivers installed
- LGNPST 1.3 YOU MUST BE ON LGNPST 1.3
- LGNPST Components----Thank you asadullah!
- Virgin Mobile PRL
- Your SPC code, get it by following the youtube video. Thank you asadullah!
DO NOT OPEN LGNPST until I say so.
Step 0: Enable the Administrator account (Windows Vista/7 users only. Windows XP users skip to Step 1.)
-type "cmd" (without quotes)
-right click cmd
-Run as Admin
type "net users Administrator /active:yes" (without quotes)
type "net users Administrator * " (without quotes)
Hit enter 3 times
Select the Administrator account.
FROM NOW ON you will only use this account for the entire process.
Because this program has issues when it is not used/installed via the actual Admin account. Normally install issues and running issues.
Step 1: Install LGNPST>Reboot>Extract and install everything in LGNPST Components.zip
-Extract VM670.dll to C:\LG Electronics\LGNPST\Model\MTP (create folders if they don't exist) and Right-click VM670.dll press Register Active X DLL
-Extract LS670.dll to C:\LG Electronics\LGNPST\Model\MTP\LS670 and and Right-click LS670.dll press Register Active X DLL
The LS670 DLL must be in a seperate folder before you register it!
Step 3: Connect phone while in recovery mode. If using VM670NH recovery, you must boot into phone and open the PORT by dialing ##7678# then enter SPC code> then check the checkbox. Leave the phone alone now.
Step 4: Open LGNPST, make sure it connects to your phone.
Step 5: Go to where you registered the VM670.dll
Copy the file called VM670_COM##.nvs and paste it to a place you will remember it.
If file doesn't exist yet, press Phone Setting>Enter SPC>Press Read, then close it and go look for the file now.
YOU MUST HAVE THIS FILE BEFORE CONTINUING AND BACKED UP! FAILURE TO DO THIS WILL RESULT IN PERMANENT 3G/DATA LOSS ON YOUR PHONE. I WILL NOT BE HELD RESPONSIBLE BY YOUR MISTAKE.
IF YOUR COMPUTER HAS HDD PROBLEMS, YOU BETTER BACK IT UP TO A FLASH DRIVE!
Step 6: Disconnect phone, put it in emergency mode.
[INFO]If you do not know how to do this, you shouldn't be doing this, go learn more about the Optimus V.[/INFO]
Step 7: Select LS670.dll and the bin file that you extracted from the RAR Archive.
Step 8: Press Start
Step 9: Go eat a cookie with some milk because this will take a while.
Step 10: When it is done, you will notice everything zeroed out. Press the Data tab and then browse to where you backed up the VM670_COM##.nvs file. Press Start> Press Yes.
Reboot the phone if it doesn't automatically after it hits 100%.
Step 11: Flash a Virgin Mobile PRL
Press Provision tab, PRL/ERI
Go to the top where it says "Tool (T)" and press Show Only Old UI
Select Write, Checkmark PRL and Nam1 and Nam2
Browse and select to where you extracted the PRL file
Press Start, Enter SPC if asked.
Phone will reboot.
Step 12: Now follow this to get AAA/HA keys and to reprogram the phone for data to work:
Fix V data for ZVD/ZVJ
Do not forget, to get into recovery mode, it will now be Power+Menu+Volume Down because of key switch.
Congrats you are on LS670ZVD, now follow this guide to root and to get ZVJ on it:
[How-To] Automated Rooting of LS670ZVD/ZVH/ZVJ
You are on Optimus S firmware now, you must use Optimus S recoveries.
[INFO]Use this patch created by nitestalkr to run Optimus V ROMS and ZVD OS ROMS:
http://forums.androidcentral.com/opt...optimus-v.html---The second patch. [/INFO][/BOX]