- 08-22-2012, 11:47 AM #26
- 08-22-2012, 01:20 PM #27
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
"3. Connect phone in recovery mode (Phone off> Volume Down + Home key)(This will not work with certain recoveries, in that case you will need your MSL code here and then dial ##PORT# and enter MSL code (aka SPC code))"
How do I know I'm connected? I launch the sw update then it gets to unpack ZD5, I let it stay that way for 30 mins, 10 mins and 7 mins on three different trys. I get to my recovery mode by holding down home, volume up and power. I tried it that way, and I tried it the way listed above.
What am I doing wrong? - 08-22-2012, 02:24 PM
Thread Author #28
- 08-22-2012, 03:25 PM #29
- 08-22-2012, 07:06 PM #30
- 08-22-2012, 07:41 PM
Thread Author #31
- 08-22-2012, 07:58 PM #32
- 08-26-2012, 06:28 AM #33
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
I've followed this to step 10. Then I get an error that says it cannot unpack the file.
I followed on with the balance of the steps but nothing changed.
When I power on the Optimus V, it just goes to the white LG logo and hangs.
What should I try next?
Thanks in advance for your help. - 08-26-2012, 07:30 AM
Thread Author #34
- 08-27-2012, 01:15 AM #35
- 08-27-2012, 08:00 AM
Thread Author #36
- 08-27-2012, 03:04 PM #37
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
Yeah, got it unbricked!!!
Finally went to my laptop and installed everything fresh from there.
Also, I had to use the following from Upgrade/Downgrade/Return to stock directions:
5. In type, choose 3GQCT
6. In Phonemode, choose DIAG
In step 5, I had to set it to CDMA. Then it all came back alive.
Without these steps, I was stuck in Emergency Mode regardless of what I
did.
Thanks for all your hard work. Major lifesaver for me.Last edited by Robertdol; 08-28-2012 at 07:45 AM.
- 09-03-2012, 06:58 PM #38
- 09-06-2012, 03:08 PM #39
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
I have done this for several times now and I get well along into the software update. and i get the error message and then i take the battery out and put it back it. Then it runs for a while the it gets to the reset phone part and the phone gets stuck on the recovery. from there the phone is stuck on that and even if i take the battery out and simply turn it back in it just turns on in recovery.
I have done it like 10 times now with the same result.
Any help? My phone wont wont mount the sd card so i cant install another recovery. i have tried with 3 sd cards now and it wont work. Any help will be well appreciated - 09-06-2012, 04:18 PM
Thread Author #40
- 09-06-2012, 11:03 PM #41
- 09-07-2012, 02:11 PM #42
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
I'm having an issue like G.Monroy.92
Steps 1-8: Okay
Step 9: Upgrade Error / WParam: 100 / LParam: 84
Step 10: Okay
Step 11: "reindeer battery" = "reinsert battery"?
Step 12: Okay
Then it ends up at:
Phone: CWM-based Recovery v4.0.1.5
KDZ_FW_UPD: Step : Phone Reset(DLL Cmd)
On phone I "wipe data/factory reset" and "reboot system now" and I get to:
Phone: CWM-based Recovery v4.0.1.5
KDZ_FW_UPD: Upgrade Error / WParam: 100 / LParam: 92
And phone keeps rebooting into recovery.
I have done the steps 10+ times both with and without the battery and either the above happens or it gets stuck on repeating "Step : Flash Burning(SDRAM to FLASH)".
I updated to VM670ZV9 without thinking about waiting for it to be road tested then rooted as per ([ROOT] Virgin Mobile Security Update Now Rooted!!! Thanks jcase!!). I wanted to get rid of crumbs of things I installed/uninstalled and without thinking (once again) I did the Menu / Settings / Privacy / Factory Data Reset. Any help you can give would be greatly appreciated, I can't afford a new phone and losing my grandfathered plan! Any other information you need? - 09-08-2012, 01:33 PM #43
- 09-08-2012, 02:27 PM
Thread Author #44
- 09-10-2012, 05:24 PM #45
- 09-10-2012, 05:48 PM
Thread Author #46
- 09-10-2012, 10:00 PM #47
- 09-10-2012, 10:13 PM
Thread Author #48
- 09-10-2012, 10:54 PM #49
Re: [GUIDE] Unbrick/Upgrade Optimus V [EASY] [KDZ]
Battery seems alright, Tried that, but phone outputs as follows:
-- Installing: /sdcard/flash_image.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
In the Root instructions followed previously ([ROOT] Virgin Mobile Security Update Now Rooted!!! Thanks jcase!!), it talks about "Prevent Recovery Re-Write". Is there something I need to do to enable the Xionia installation? - 09-11-2012, 06:08 AM
Thread Author #50




Reply
































