Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
Edit: I also reinstalled the drivers on Samsung Kies several times, but it keeps getting stuck on "connecting device" each time I plug it in while on Kies.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
Edit: I also reinstalled the drivers on Samsung Kies several times, but it keeps getting stuck on "connecting device" each time I plug it in while on Kies.
Last edited:
Facebook
Twitter
Instagram