How can I fix my bricked Sprint S6 Edge?

[AC Question]

bricked my sprint s6 edge please help!

So got my Sprint s6 edge few months ago and rooted it a week after. Sadly i dont know what i used rom wise to root it since its been a month+. Sadly i reformated pc awhile back so can't see the files i used.

Got bored and wanted to try and install xposed to add some new features to my phone. So just tried and i'm prety sure i bricked it hard...

what i followed
gs6.wonderhowto.com/how-to/install-xposed-framework-your-samsung-galaxy-s6-s6-edge-0163918/

It said make a recovery so i did by following
gs6.wonderhowto.com/how-to/install-custom-recovery-your-galaxy-s6-s6-edge-0161619/

I did what he did and after it asked for a reboot i rebooted and it got stuck on samsung boot logo saying "Recovery not SEANDROID Enforcing" in top left corner.


So i googled how to remove root and how to get past this screen and many suggested stock rom. I tried that and odin (v3.09) wont get past "Write NAND!"

I let it set for 20 minutes and nothing happened so i googled and everyone claimed trying different usb hubs and cables so i did that. I've tried every usb hub on my pc(8) and all 3 cables i had. So then tried different version v3.10.7 of odin and it fails with following


<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


And in top right under Odin mode it reads
Product Name: SM-G295P
Current binary: Custom
System Status: Custom
FRP Lock: OFF
Secure Download: Enabled
Knox warranty void: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1


So now i'm just lost and scared at what to do. I googled "SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1" And my findings are just to use stock rom...but thats what i did in first place. So now i'm stuck with a phone that is continuously rebooting itself to the samsung boot logo....


G925PVPU3BOJ7_G925PSPT3BOJ7_G925PVPU3BOJ7_HOME.tar.md5 is the 5.1.1 stock firmware im trying to use...


Can someone please help? I can skype or teamspeak or ventrilo or just use this forum to help me but i'm beyond confused on what to do now... phone is continuously rebooting itself to the samsung boot logo...but i managed to make it stop by making phone sit in download mode...


i can not go into recovery or safe mode. All i can do is wtach my phone go to the boot logo "Samsung Galaxy S6 Edge" screen then to black screen back to boot screen. And i can put it into download mode.... Thats it...The brick is real...

 

[jewishluck]

Re: bricked my sprint s6 edge please help!

This is my post, i also posted somehwre else so sorry but i just need help, been stuck like this all day

 

[jewishluck]

Re: bricked my sprint s6 edge please help!

randomly got it to work after 2 hours of leaving it alone i can now start to install the stock firmware but it stops

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!



i dk if phone not charged enough or what

 

[wrealm]

Re: bricked my sprint s6 edge please help!

like you, i also need help with the same thing.

my phone says

<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[Farukh Rehan]

Did you got fix ?

 

[Deanig_12]

who dotn you just use samsung keis on pc in dowload mode on the phone