Welcome to the Android Central Forums Create Your Account or Ask a Question Answers in 5 minutes - no registration required!
Results 1 to 3 of 3
  1. Thread Author  Thread Author    #1  

    Default Galaxy Note Pro LCD and digitizer fused or separate?


    I dropped my Note Pro and the (12.2") screen is pretty badly cracked but the functionality is fine. I would like to know whether I can just replace the digitizer (which I have already ordered from China) or if this is fused to the LCD, in which case I would need to replace both presumably.

    Despite enjoying this tablet, there doesn't seem to be that much information on the internet regarding maintenance so any advice would be greatly appreciated.

  2. #2  

    Default Re: Galaxy Note Pro LCD and digitizer fused or separate?

    I too need to know this answer.... I have the same tablet, and if its the entire assembly then I'm not going to spend $200 bucks on it. If it's just the digitizer, I'm good with spending $65
  3. #3  

    Default Re: Galaxy Note Pro LCD and digitizer fused or separate?

    Touchscreen is only around $50 but LCD and touchscreen are glued with Optically Clear Adhesive ( OCA ) film. I think your chance of breaking the LCD is 90% if using heat gun.
    They have special heat plate to heat up the LCD evenly and thin metal wire to separate the touchscreen and LCD. No experience you;re more likely will cut or damage LCD flex cables as well as crack the LCD. Even if you can change it without damage to LCD, air bubbles between the two glasses are unavoidable without OCA film.

    Here is mine with new touchscreen without OCA film

    Galaxy Note Pro LCD and digitizer fused or separate?-img_1554.jpg

Similar Threads

  1. Replies: 1
    Last Post: 03-09-2015, 07:48 PM
  2. Replies: 2
    Last Post: 11-04-2014, 02:44 AM
  3. Replies: 6
    Last Post: 07-30-2014, 02:31 PM
  4. Verizon Galaxy S5 Won't Receive SMS
    By AC Question in forum Ask a Question
    Replies: 1
    Last Post: 07-24-2014, 04:24 PM

Posting Permissions