The obligatory Dialer Hash Codes thread.
Disclaimer: Neither I nor Android Central are responsible for any problems that may result from the use of these codes. In other words, use at your own risk!!!
To use these codes, you simply open up your phone dialer, and type them in.
*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results
*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics
*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD
##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats
*#DATA*SCREEN*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!
*#0BAT# - BatteryStatus
Very useful real-time battery statistics!
##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems
##DATA# - Data Programming - Requires MSL
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##DEBUG# - Debug Menu - Requires MSL
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##AKEY# - Data A key menu - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##<MSL># - Master Subsidy Lock - Requires MSL
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
The <MSL> is your phone's Master Subsidy Lock, a 6 digit code, you can sometimes get it from Sprint
##GPSCLRX# - Reset the GPS - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##SCRTN# - Changes DSA back to Factory - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##TTY# - TTY TestMode
*#AUDIO# - audioTuning - various audio settings
stream: (stream_headset/stream_speaker/stream_earpiece) / situation: (KEYTONE/VOLUMKEY/SHUTTER/AF/CAMCORDING/TOUCH_TONE/BOOTSOUND/MIDI/TEMP1/TEMP2/TEMP3/TEMP4 SAVE) / soundBooster: (High Pass Filter/Gain Level/Clarity/ ON/OFF SAVE) / Acoustic Equalizer: (AM ON/OFF SAVE) / LM Filter: (CutOff Frequency/Effect Level/Compressor Gain/Attenuation Level ON/OFF Save) / EQ Filter: (EQ on/off LPF on/off HPF on/off LPF Corner Gain/HPF Corner Gain/Preset/5BAND Frequency/5BAND QFactor/5BAND Gain Save) / SRS: (CSHP/WOW_EXTTREME/WOW_NORMAL SAVE)
*#0VIB# - Device Test - Vibration Test
*#0MP3# - MelodyTest
*#7780# - Factory data reset
*#232331# - BluetoothTest
*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is
*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device
*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically
*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does
*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot
*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio
*#2580# - ServiceMode - Not sure what this does
*#0RTC# - RTCTimeRead - Displays Date and Time
*#RIL# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet
*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet
This has been posted several times, but I thought it might be useful for some people who may not have seen it.
To get into the Android system recovery/Samsung Recover Utils
Turn off phone, hold volume down, the power button, and the camera button at the same time to enter the recovery partition, and recover the phone
Use Volume keys to move among options, and the Home key to select
reboot system now
apply sdcard:update.zip - Manually update from your SD card
wipe data/factory reset
wipe cache partition - Didn't do anything for me
I hope you find this to be useful information. Feel free to add other codes you have discovered, or correct any misunderstanding I may have about what a certain code does.
Disclaimer: Neither I nor Android Central are responsible for any problems that may result from the use of these codes. In other words, use at your own risk!!!
To use these codes, you simply open up your phone dialer, and type them in.
*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results
*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics
*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD
##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats
*#DATA*SCREEN*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!
*#0BAT# - BatteryStatus
Very useful real-time battery statistics!
##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems
##DATA# - Data Programming - Requires MSL
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##DEBUG# - Debug Menu - Requires MSL
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##AKEY# - Data A key menu - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##<MSL># - Master Subsidy Lock - Requires MSL
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
The <MSL> is your phone's Master Subsidy Lock, a 6 digit code, you can sometimes get it from Sprint
##GPSCLRX# - Reset the GPS - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##SCRTN# - Changes DSA back to Factory - Requires MSL
I don't have my MSL (Master Subsidy Lock) code, so I can't test this
##TTY# - TTY TestMode
*#AUDIO# - audioTuning - various audio settings
stream: (stream_headset/stream_speaker/stream_earpiece) / situation: (KEYTONE/VOLUMKEY/SHUTTER/AF/CAMCORDING/TOUCH_TONE/BOOTSOUND/MIDI/TEMP1/TEMP2/TEMP3/TEMP4 SAVE) / soundBooster: (High Pass Filter/Gain Level/Clarity/ ON/OFF SAVE) / Acoustic Equalizer: (AM ON/OFF SAVE) / LM Filter: (CutOff Frequency/Effect Level/Compressor Gain/Attenuation Level ON/OFF Save) / EQ Filter: (EQ on/off LPF on/off HPF on/off LPF Corner Gain/HPF Corner Gain/Preset/5BAND Frequency/5BAND QFactor/5BAND Gain Save) / SRS: (CSHP/WOW_EXTTREME/WOW_NORMAL SAVE)
*#0VIB# - Device Test - Vibration Test
*#0MP3# - MelodyTest
*#7780# - Factory data reset
*#232331# - BluetoothTest
*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is
*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device
*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically
*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does
*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot
*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio
*#2580# - ServiceMode - Not sure what this does
*#0RTC# - RTCTimeRead - Displays Date and Time
*#RIL# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet
*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet
This has been posted several times, but I thought it might be useful for some people who may not have seen it.
To get into the Android system recovery/Samsung Recover Utils
Turn off phone, hold volume down, the power button, and the camera button at the same time to enter the recovery partition, and recover the phone
Use Volume keys to move among options, and the Home key to select
reboot system now
apply sdcard:update.zip - Manually update from your SD card
wipe data/factory reset
wipe cache partition - Didn't do anything for me
I hope you find this to be useful information. Feel free to add other codes you have discovered, or correct any misunderstanding I may have about what a certain code does.
Last edited: