Printable View
Anybody did this mod for their new phone?
I am contemplating on doing this but I want to see a consensus here :)
I have been seeing tutorials for the galaxy nexus but none for the S3
Anyone have a tutorial link for our phone? Preferably the one that does not need soldering.
Sent from my Samsung Galaxy S3 using Tapatalk2
I actually did it last week. It was fairly easy and no tutorial was really needed. Just pull the inductive charger from the Palm back and center it in the back of the S3. Then run a couple of wires so that they meet up with the charging contacts. The poles are flipped so you'll have to adjust the wires for that. Currently mine is just taped in but it works just fine.
You'll have to do a search for it but there was a thread in the general GS3 forum about it. Back cover even fit on flush and everything.
I just wasn't crazy about the idea of soldering my new phone
i saw some guy just using copper tape. I am not soldering on mine.
@bumpysig can you post a picture of yours?
No problem. It looks a little rough (my girlfriend claims that it looks like a bomb) but it works just fine.Quote:
Originally Posted by johnj2803 [Only registered and activated users can see links. Click Here To Register...]
I was wondering about the positioning of the magnets. Since the s3 is llonger than the pre, don't you position it lower on the case? So it sits higher on the touchstone and not be touching the table?
Sent from my Samsung Galaxy S3 using Tapatalk2
That's true if you are going for a portrait docking position. I centered mine because I dock it in landscape (I'm using Nova Launcher so it auto-rotates on the home-screen). Just adjust it for whatever you prefer.Quote:
Originally Posted by johnj2803 [Only registered and activated users can see links. Click Here To Register...]
Did you solder the wires on the palm connectors? Also, how did you attach the wires to the gs3 if you didn't solder?
Thanks.
Bear with me as I try to explain it. That first piece of tape has the wires held in place over the Palm connectors, they are properly separated. The ends of the wires that meet up with the S III are balled up so that when the back is placed on the phone they are pressed into the recess for the connectors. The second piece of tape helps to hold the wires in place. This allows the cover to be popped on and off easily. So, in conclusion, patience and tape with a little forethought.
I'm missing what's accomplished by doing this?
Sent from my SAMSUNG-SGH-I747 using Android Central Forums
You can wirelessly charge your Galaxy S3 on a Palm Touchstone charger.Quote:
Originally Posted by 20blks [Only registered and activated users can see links. Click Here To Register...]
[YT]http://www.youtube.com/watch?v=uAqP3T_Mbzg[/YT]
Palm really was ahead of its time on this one. RIP webOS * pours one out *
I have just completed the Mod successfully using only copper tape and electrical tape.
NO SOLDERING.
I would recommend also reading [Only registered and activated users can see links. Click Here To Register...]
I would Recommend watching these videos
[YT]http://www.youtube.com/watch?feature=player_embedded&v=0ga4N_Ih9GE[/YT]
and the video posted above
[YT]https://www.youtube.com/watch?v=uAqP3T_Mbzg&feature=player_embedded[/YT]
this method i think produces the least bulk to the back case.
I can confirm that is does not work with [Only registered and activated users can see links. Click Here To Register...]
hope this helps
just to update my post
the copper tape adhesive I have used does not work reliably, the adhesive is not enough make the tape adhere to the contact points from the coil. Electrical tape does not stabilize it enough. Couldn't find a way to make it stay. My charging would go on and off sometimes.
I soldered the copper tape to the contacts of the coil. Note that the soldering parting not on the phone itself but the part you removed from the back cover of the webOS device I used.
also, I think it is better to use one continuous strip of copper tape.
I did this today using pixi parts, they are very slim. I didn't solder anything. Just some electrical tape and careful placement of the wires.
Getting stronger magnets would have helped cause the s3 is much larger when sitting on the touchstone than the palm phones were.
[Only registered and activated users can see links. Click Here To Register...]
I used these magnets on Palm Pre extended battery case, HTC EVO, and Samsung Epic. You can use 2 magnets side by side in place of 1 metal disk. Neither of these phones, placed almost vertically, ever fell off the Touchstone in the car. Enjoy!
I'm just about ready to try this. Question: is there a particular type of wire that is needed, or just any typical insulated wire? {Jonathan, not particularly savvy about things electrical}
I did mine quick and dirty with insulated wire. johnj2803 used copper tape. As long as the lines are kept separate you can go either way you choose.Quote:
Originally Posted by Jonathan I Ezor [Only registered and activated users can see links. Click Here To Register...]
I think I'm going to try to position the it closer to the middle, and use larger rubber washers (or maybe some Sugru) to raise the Touchstone. That way I can have the phone sitting in portrait or landscape. :cool:Quote:
Originally Posted by johnj2803 [Only registered and activated users can see links. Click Here To Register...]
It took a bit of extra pressure on the connectors so that they always make contact but I have it up and running. Long live the Touchstone!!!
That seems like a awful lot of trouble to go through just so you don't have to plug a charging cord into your phone. But on the upside, you do earn some bragging rights, so I guess it's all good.:D
wonder if they TSA would strip search you if you ran that through their scanners? :)
I was wondering about when Samsung would release their wireless charger too...
I'll just try to [Only registered and activated users can see links. Click Here To Register...] them to it. (Go with NSFW to be safe)Quote:
Originally Posted by kenyee [Only registered and activated users can see links. Click Here To Register...]
As for the charger it is [Only registered and activated users can see links. Click Here To Register...] until the fall. Which at this point may only be two months but that is still two months ahead of the curve.
Does NFC still work with the TS coil right on top of the battery?
I've been able to use beam with no issues.Quote:
Originally Posted by camiller [Only registered and activated users can see links. Click Here To Register...]
What type/gauge wire did you end up using?Quote:
Originally Posted by bumpysig [Only registered and activated users can see links. Click Here To Register...]
Sent from my SPH-L710 using Android Central Forums
I cannibalized some wire from an old usb charger. Rough but effective.Quote:
Originally Posted by Uncle Louie [Only registered and activated users can see links. Click Here To Register...]