Results 1 to 2 of 2
  1. Thread Author  Thread Author    #1  

    Default Stock FP5 Cannot ODIN?? Phone now bricked! Help?

    Hello!!!

    I've gotten a warranty replacement for my samsung charge and went to ODIN flash it back to EP4D per tweaked's 2.2's recommendation. After attempting the following the phone does not boot. I can get the phone into download mode, but cannot access any recovery mode. When attempting to turn it on it gives a little phone, two ..'s with a yellow exclamation symbol with two more ..'s next to a computer symbol. It is stuck there. I used this guide : Flashing Roms or Return to Stock with Odin BY PICTURE to get the stock EP4/D image and the pits file to flash back to stock from FP5. Upon trying to flash I got this error log from ODIN:

    <ID:0/005> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/005> Odin v.3 engine (ID:5)..
    <ID:0/005> File analysis..
    <ID:0/005> SetupConnection..
    <ID:0/005> Removed!!
    <OSM> All threads completed. (succeed 0 / failed 1)

    I tried switching cables, unchecking and rechecking the time/reset options (the partitioning box was left checked), and many many attempts, all result in failed.

    After that i decided to try to flash CWM to see if that would even work! It did not, same fail status. Here is the log:


    <ID:0/005> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> 0302_charge_recovery.tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/005> Odin v.3 engine (ID:5)..
    <ID:0/005> File analysis..
    <ID:0/005> SetupConnection..
    <ID:0/005> Initialzation..
    <ID:0/005> Get PIT for mapping..
    <ID:0/005> Firmware update start..
    <ID:0/005> recovery.bin
    <ID:0/005>
    <ID:0/005> Complete(Write) operation failed.
    <ID:0/005> Removed!!
    <OSM> All threads completed. (succeed 0 / failed 1)


    Any helpful advice would be appreciated. I will be sitting on this bricked phone for a few days waiting for my replacement and I would like to sort this all out before I attempt anything else on the new-new replacement :P
  2. #2  
    kraisydave's Avatar

    Posts
    111 Posts
    ROM
    GummyCharged 2.1

    Default Re: Stock FP5 Cannot ODIN?? Phone now bricked! Help?

    I believe that I answered you on another forum... but just in case> Your phone is not bricked. Bricked means you broke the boot loader. If you broke the boot loader then Download Mode would not be an option. All you did was erase the operating system and fail to install a new one.

    Just flash a new one via my restore video on youtube. And then follow the steps to root and ROM. Watch the videos with Restore FP1, FP5, and then FP1 root.

    Let me know if you need help. --- your phone is fine.

    Dave
    www.youtube.com/kraisydave
    www.KDtech.org Twitter @kraisydave
    Everyone deserves to get the most out of their phone!

Similar Threads

  1. Help! Bricked my tab and odin is not helping!
    By RJV3 in forum Samsung Galaxy Tab 8.9
    Replies: 4
    Last Post: 09-06-2012, 06:50 PM
  2. Semi Bricked S2 :( Phone not recognized by computer/odin
    By jasonmaar in forum Sprint Galaxy S II Epic 4G Touch
    Replies: 3
    Last Post: 01-26-2012, 09:50 PM
  3. Bricked after Odin flash?
    By innovationplus in forum Epic 4G Rooting, ROMs, and Hacks
    Replies: 9
    Last Post: 01-04-2012, 11:50 AM
  4. Debloated GB stock through Odin?
    By Glorfindale in forum Verizon Fascinate Rooting, ROMs, and Hacks
    Replies: 6
    Last Post: 12-15-2011, 07:36 AM

Posting Permissions

B