11-03-2015 07:05 PM
679 ... 678910 ...
tools
  1. tinytim328's Avatar
    I actually just received my Tudia TPU Case today and it does NOT fit the ballistic nylon version of the Turbo. Just a heads up for those with the ballistic nylon version to steer clear of the case.
    Emperor likes this.
    11-14-2014 06:50 PM
  2. stevenmh's Avatar
    I actually just received my Tudia TPU Case today and it does NOT fit the ballistic nylon version of the Turbo. Just a heads up for those with the ballistic nylon version to steer clear of the case.
    It fits perfectly on mine. Why do you say it doesn't fit.
    11-14-2014 06:58 PM
  3. ibcop's Avatar
    I actually just received my Tudia TPU Case today and it does NOT fit the ballistic nylon version of the Turbo. Just a heads up for those with the ballistic nylon version to steer clear of the case.
    Ah, thanks for the good info.
    11-14-2014 07:00 PM
  4. LaskoFan's Avatar
    Was just going to order the Tudia for my 64BN. One vote says it fits, one for does not. Anybody else make it work. I would think there is enough give in the TPU material to make it work.
    11-14-2014 07:28 PM
  5. tinytim328's Avatar
    It fits perfectly on mine. Why do you say it doesn't fit.
    It didn't fit mine, both edges on the sides of the case weren't fully catching on top of the bezel. The top and bottom were fitting fine but when I tried to force the sides on I took a look at the back and the holes weren't aligning correctly with the camera and LEDs.
    KPMcClave likes this.
    11-14-2014 08:09 PM
  6. stevenmh's Avatar
    I had some trouble getting it to grab on the top and the cam holes were sitting a bit low. So I tried again fitting the top first and then pulling it over the bottom. Worked much better and fits great.
    KPMcClave likes this.
    11-14-2014 08:44 PM
  7. stevenmh's Avatar
    Going to recant a bit. I see what you're saying on the sides. They seem to roll off pretty easy when I handle it. Will give it a few days and see if it molds itself to the phone better, but would agree the nylon folks might want to hold off.
    11-14-2014 09:33 PM
  8. Eclipse2K's Avatar
    Going to recant a bit. I see what you're saying on the sides. They seem to roll off pretty easy when I handle it. Will give it a few days and see if it molds itself to the phone better, but would agree the nylon folks might want to hold off.
    My Tech21 does the same thing on the top right while in my pocket at times. It fits tight but just off a bit I guess.

    Sent from my Motorola Droid Turbo
    11-14-2014 09:46 PM
  9. johnnyshinta's Avatar
    So it looks like the nylon version does fit differently? That's unfortunate.
    11-15-2014 08:53 AM
  10. ibcop's Avatar
    Was just going to order the Tudia for my 64BN. One vote says it fits, one for does not. Anybody else make it work. I would think there is enough give in the TPU material to make it work.
    The Amazon page now says it does not fit the BN versions.

    http://www.amazon.com/TUDIA-Protecti...cUvbUpU4055728
    11-15-2014 10:28 AM
  11. Eclipse2K's Avatar
    The Amazon page now says it does not fit the BN versions.

    http://www.amazon.com/TUDIA-Protecti...cUvbUpU4055751
    These companies need to make cases for both phones although I imagine the reason they won't is that they feel the Ballastic Nylon won't bring in a profit. Such a shame really because while the Tech21 fits great the right top corner does slip off at times when in my pocket and ONLY when in my pocket.

    Sent from my Motorola Droid Turbo
    11-15-2014 10:36 AM
  12. ibcop's Avatar
    These companies need to make cases for both phones although I imagine the reason they won't is that they feel the Ballastic Nylon won't bring in a profit. Such a shame really because while the Tech21 fits great the right top corner does slip off at times when in my pocket and ONLY when in my pocket.

    Sent from my Motorola Droid Turbo
    I have my Tech21 case going back today. I saw another post where the BB Z30 case and pouch fit the Turbo like a glove. I'll make due until I find something else.

    http://forums.androidcentral.com/mot...ns-anyone.html
    11-15-2014 10:43 AM
  13. Eclipse2K's Avatar
    I have my Tech21 case going back today. I saw another post where the BB Z30 case and pouch fit the Turbo like a glove. I'll make due until I find something else.

    http://forums.androidcentral.com/mot...ns-anyone.html
    Why you returning the Tech21? Do you notice the same issue that I do?

    Sent from my Motorola Droid Turbo
    11-15-2014 11:02 AM
  14. Clocks's Avatar
    I massaged it over the edges and it's holding great the whole way around on my BN. I didn't even think there was a problem, just assumed they were keeping it low profile to stay away from the screen and top speakers.
    11-15-2014 11:38 AM
  15. ibcop's Avatar
    Why you returning the Tech21? Do you notice the same issue that I do?

    Sent from my Motorola Droid Turbo
    Yeah, I actually slapped it on today and notice the edges tend to come off when used in a pocket.

    Posted via the Android Central App
    11-15-2014 12:25 PM
  16. Eclipse2K's Avatar
    Yeah, I actually slapped it on today and notice the edges tend to come off when used in a pocket.

    Posted via the Android Central App
    That can be slightly annoying. Also, the buttons are more difficult to press on the BN version with the Tech21 than the MG phone.

    Sent from my Motorola Droid Turbo
    11-15-2014 01:01 PM
  17. bizzyqu's Avatar
    Just got the life proof, made a call no complaints from me or recipient on quality, played music and it sounded fine too. Nice and thin and shows off all of the ballistic nylon.

    Edit: updated my experience with calls on the next page of this thread

    Posted via the Android Central App
    11-15-2014 03:53 PM
  18. ibcop's Avatar
    Just got the life proof, made a call no complaints from me or recipient on quality, played music and it sounded fine too. Nice and thin and shows off all of the ballistic nylon.

    Posted via the Android Central App
    Okay, lets see this one too.....
    11-15-2014 05:47 PM
  19. bizzyqu's Avatar
    Okay, lets see this one too.....
    Haha, when I get home

    Posted via the Android Central App
    11-15-2014 05:49 PM
  20. jbomb11's Avatar


    Picked this up on eBay for $5 I'll report back when I get it
    11-15-2014 06:56 PM
  21. bizzyqu's Avatar
    Okay, lets see this one too.....
    Posted via the Android Central App
    Attached Thumbnails DROID TURBO: Cases-12577.jpg   DROID TURBO: Cases-12576.jpg  
    11-15-2014 07:01 PM
  22. billbrobaggins's Avatar
    Posted via the Android Central App
    I likey

    Posted via the Android Central App
    11-15-2014 07:57 PM
  23. ibcop's Avatar
    Posted via the Android Central App
    Looks good.
    11-15-2014 08:10 PM
  24. Emperor's Avatar
    http://tapatalk.imageshack.com/v2/14...ebbe391a7b.jpg

    Picked this up on eBay for $5 I'll report back when I get it
    Who makes this case?


    Turbo 64GB Beast
    11-15-2014 10:33 PM
  25. johnnyshinta's Avatar
    So the dimensions are different for the ballistic nylon version. That's a really poor design flaw
    11-15-2014 11:06 PM
679 ... 678910 ...

Similar Threads

  1. Issues with MTP Mode - Turbo Driver
    By pftomo in forum Motorola Droid Turbo
    Replies: 5
    Last Post: 12-12-2014, 02:02 PM
  2. Still looking for a good protective case
    By charleskoz in forum Samsung Galaxy Note 4 Accessories
    Replies: 17
    Last Post: 11-25-2014, 09:09 PM
  3. Is there a case that has an adjustable stand?
    By AnimalMotherASF in forum HTC One M8
    Replies: 1
    Last Post: 11-04-2014, 05:44 AM
  4. Replies: 1
    Last Post: 11-03-2014, 10:30 AM
LINK TO POST COPIED TO CLIPBOARD