09-05-2012 08:47 PM
39 12
tools
  1. Phatninja55's Avatar
    Updated OP for another use.
    Do this:

    Install Anycut----this is an app that is to be installed on phone.

    Open Anycut>New shortcut>Activity>CDG2>OK>Go to home screen>Open CDG2

    Select Data Setting>PPP Carrier>Undetermined>Hit back key>Phone will reboot.
    • Open LGNPST (if it is not already) It will say LS670, we need to click phone setting
    • Time to enter the spc or msl of your phone. this is the code we wrote down in procedure 2.
    • Now all we have to do is click read. It may freeze, just don't force quit the program.
    • So now we are done with LGNPST, BUT leave it open!

    1. We need to open DFS
    2. after opening DFS do what it says in the picture:
    3. After we are in the programming menu go to the mobile ip tab.
    4. Now that we are in the mobile ip dialog, we need to read all the phone info.
    5. Okay so now we need to delete everything the picture says to delete. MAKE SURE TO CLICK SAVE CURRENT PROFILE SETTINGS.
    6. So now we need to copy some settings from profile 3. You can write them down or type them in a word document or notepad. IMPORTANT!!! When copying the aaa and ha password, UN-check the block next to it.
    7. now we need to write these settings to profile 2.
    8. now reboot your phone and you should have working data, mms, and calling.

    The end!
    WakeUpC22 and THEHIGHEREARTH like this.
    05-06-2012 08:30 PM
  2. cole2kb's Avatar
    So, a couple of questions:

    What situations exactly would this call for? Bricked as in no recovery? LG silver logo boot-loop? Can you elaborate a bit on this?

    Doesn't the stock update.zip that we have now from VM that includes the radio image for the V make this lengthy process unnecessary?

    Just looking for clarification. Thanks for the write-up!
    05-06-2012 09:12 PM
  3. sellers86's Avatar
    So, a couple of questions:

    What situations exactly would this call for? Bricked as in no recovery? LG silver logo boot-loop? Can you elaborate a bit on this?

    Doesn't the stock update.zip that we have now from VM that includes the radio image for the V make this lengthy process unnecessary?

    Just looking for clarification. Thanks for the write-up!
    Bricks for if someone flashed the radio update in the touch recovery

    Sent from my LG-VM670 using Tapatalk
    05-07-2012 12:21 AM
  4. Phatninja55's Avatar
    It fixes most major bricks. Like if you can't get into recovery, and are stuck in emergency mode.
    05-07-2012 07:25 PM
  5. Busterbluth123's Avatar
    I tried this method, but keep getting a fatal error. Any suggestions?
    05-13-2012 04:45 AM
  6. Ph1Man's Avatar
    On what step are you getting a fatal error? Is the error showing on the phone, in the DOS window, or in the lg app? (PS I got an error when i did this because on step 6 of section 1 I typed what it told me to write, but forgot to move the actual file to that location.)
    05-13-2012 06:09 AM
  7. Busterbluth123's Avatar
    Sorry, I thought I attached a screenshot. It happens in the LG app, after the unplug-restart step. It runs for a minute, gets up to about 80%, then says that it can't continue because of a fatal error. Let me see if I can find the screenshot so you can see the log.
    05-13-2012 08:06 AM
  8. Busterbluth123's Avatar
    Here is the shot:
    05-13-2012 01:47 PM
  9. Ph1Man's Avatar
    I had a few weird errors when i did this as well. But, I just kept hitting retry, or disconnecting and rebooting and trying again. If that doesn't work you should press the power button, to see if it boots at all, if you are just stuck in a boot loop or have access to the recovery you might be able to do an adb push of a recovery or something else that would allow you to run the VM update.zip.
    05-13-2012 01:55 PM
  10. Ph1Man's Avatar
    Just looked at the screen shot. Did you run the entire process over again to see if you got the same error again?
    05-13-2012 01:57 PM
  11. Busterbluth123's Avatar
    I did. Ran it two or three times this morning.
    05-13-2012 01:59 PM
  12. Busterbluth123's Avatar
    The one thing I did notice was that I already had a newer version of one of the drivers from the package. Perhaps I'll downgrade to the one in the file and see what happens.
    05-13-2012 02:04 PM
  13. Ph1Man's Avatar
    It looks like it is having trouble extracting the .cab file (could be corrupt or the location is wrong). You should redownload the unbrickfiles.rar then re-extract the unbrickfiles to the root of your c:\ as recommended, and be very careful when typing to type exactly what is in the instructions. (when you extract the files make sure your extract program does not create a second file e.g. C:\UnbrickFiles\UnbrickFiles\LS670ZVD.cab)
    05-13-2012 02:16 PM
  14. Ph1Man's Avatar
    Definitely use the one in the package, it doesn't matter any way because you are just going to over write it later.
    05-13-2012 02:32 PM
  15. Busterbluth123's Avatar
    Alright, partial success so far! Finally got the updater to run and have the S rom currently running. When I tried to retrieve my MSL code, though, it said that feature was only available in the full version. It was late, so I decided to call it a night at that point.
    05-14-2012 05:25 AM
  16. WakeUpC22's Avatar
    Great effort and guide

    I actually posted mine right after yours without realizing this was already made.

    I linked to this one in my post and hope that people get a lot of help out of this.
    05-15-2012 03:17 AM
  17. Busterbluth123's Avatar
    I'm having a problem with the CDMA workshop. The version available on the website is now 3.8.5, and when it try hit the "read" button with the LG method, it pops up an error saying that it's only available in the full version. Any workaround, or does someone have 3.8.0 they could upload?
    05-20-2012 06:54 PM
  18. daftande's Avatar
    Well I have tried various recoveries and roms and still cant get my MSL/SPC.
    I need it to change my MEID back from all zeroes.
    Anyone got any tricks for fixing my MEID?
    06-14-2012 01:30 AM
  19. BuggerZ's Avatar
    06-14-2012 12:25 PM
  20. andrewnelson23's Avatar
    The op on this should be updated. cdma workshop demo doesnt allow spc code reading now. You have to buy.
    06-14-2012 06:45 PM
  21. dmillerw's Avatar
    06-15-2012 01:55 AM
  22. shan510's Avatar
    can you help me try to get rid of ls version and go back to factory version please??!!
    06-30-2012 09:28 PM
  23. THEHIGHEREARTH's Avatar
    Worked flawlessly at the first attempt. THANK YOU!!!
    07-26-2012 05:52 PM
  24. sammyz's Avatar
    Worked flawlessly at the first attempt. THANK YOU!!!
    This is an outdated thread.....
    http://forums.androidcentral.com/opt...zv5-stock.html


    This thread has a new purpose
    07-26-2012 06:04 PM
  25. Phatninja55's Avatar
    Updated OP for other use.
    sammyz likes this.
    07-26-2012 11:50 PM
39 12
LINK TO POST COPIED TO CLIPBOARD