1. andhym3s's Avatar
    My Samsung Galaxy S9 (SM-G960W) is bricked and every time I try flashing I fail.
    I am using Odin v3.13(patched) and running as administrator.

    I put the phone in download mode, then open Odin and load the files. I was not able to check which firmware version I was supposed to flash but I'm pretty sure I have the right files. (G960WVLS6CSH1)

    Any help would be greatly appreciated.

    Here are my Odin settings:
    Samsung Galaxy S9 Bricked Help-ea0d9b72650777a7d527a8671de32a88.png
    Samsung Galaxy S9 Bricked Help-d8b81d6d39e95906354fcd0aa0e670f1.png

    Full Odin log:
    Code:
    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin engine v(ID:3.1301)..
    <ID:0/003> File analysis..
    <ID:0/003> skip file list for home binary
    <ID:0/003> apdp.mbn
    <ID:0/003> msadp.mbn
    <ID:0/003> persist.img.ext4
    <ID:0/003> userdata.img.ext4
    <ID:0/003> dqmdbg.img.ext4
    <ID:0/003> Home Binary Download
    <ID:0/003> Total Binary size: 5077 M
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> NAND Write Start!! 
    <ID:0/003> SingleDownload.
    <ID:0/003> abl.elf
    <ID:0/003> xbl.elf
    <ID:0/003> xbl_config.elf
    <ID:0/003> tz.mbn
    <ID:0/003> hyp.mbn
    <ID:0/003> devcfg.mbn
    <ID:0/003> pmic.elf
    <ID:0/003> aop.mbn
    <ID:0/003> cmnlib.mbn
    <ID:0/003> cmnlib64.mbn
    <ID:0/003> keymaster64.mbn
    <ID:0/003> qupv3fw.elf
    <ID:0/003> sec.dat
    <ID:0/003> bksecapp.mbn
    <ID:0/003> storsec.mbn
    <ID:0/003> vaultkeeper.mbn
    <ID:0/003> engmode.mbn
    <ID:0/003> NON-HLOS.bin
    <ID:0/003> boot.img
    <ID:0/003> recovery.img
    <ID:0/003> vendor.img.ext4
    <ID:0/003> system.img.ext4
    <ID:0/003> modem.bin
    <ID:0/003> Transmission Complete.. 
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response from boot-loader
    <ID:0/003> dspso.bin
    <ID:0/003> Transmission Complete.. 
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response from boot-loader
    <ID:0/003> cache.img.ext4
    <ID:0/003> odm.img.ext4
    <ID:0/003> FAIL!
    <ID:0/003> 
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
    Flashing with Odin v3.12 generates a pass but then the phone just boot loops or black screens.
    09-14-2019 04:42 PM
  2. mustang7757's Avatar
    This the Canadian model?
    My Samsung Galaxy S9 (SM-G960W) is bricked and every time I try flashing I fail.
    I am using Odin v3.13(patched) and running as administrator.

    I put the phone in download mode, then open Odin and load the files. I was not able to check which firmware version I was supposed to flash but I'm pretty sure I have the right files. (G960WVLS6CSH1)

    Any help would be greatly appreciated.

    Here are my Odin settings:
    Click image for larger version. 

Name:	ea0d9b72650777a7d527a8671de32a88.png 
Views:	17 
Size:	94.9 KB 
ID:	309824
    Click image for larger version. 

Name:	d8b81d6d39e95906354fcd0aa0e670f1.png 
Views:	17 
Size:	82.5 KB 
ID:	309825

    Full Odin log:
    Code:
    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin engine v(ID:3.1301)..
    <ID:0/003> File analysis..
    <ID:0/003> skip file list for home binary
    <ID:0/003> apdp.mbn
    <ID:0/003> msadp.mbn
    <ID:0/003> persist.img.ext4
    <ID:0/003> userdata.img.ext4
    <ID:0/003> dqmdbg.img.ext4
    <ID:0/003> Home Binary Download
    <ID:0/003> Total Binary size: 5077 M
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> NAND Write Start!! 
    <ID:0/003> SingleDownload.
    <ID:0/003> abl.elf
    <ID:0/003> xbl.elf
    <ID:0/003> xbl_config.elf
    <ID:0/003> tz.mbn
    <ID:0/003> hyp.mbn
    <ID:0/003> devcfg.mbn
    <ID:0/003> pmic.elf
    <ID:0/003> aop.mbn
    <ID:0/003> cmnlib.mbn
    <ID:0/003> cmnlib64.mbn
    <ID:0/003> keymaster64.mbn
    <ID:0/003> qupv3fw.elf
    <ID:0/003> sec.dat
    <ID:0/003> bksecapp.mbn
    <ID:0/003> storsec.mbn
    <ID:0/003> vaultkeeper.mbn
    <ID:0/003> engmode.mbn
    <ID:0/003> NON-HLOS.bin
    <ID:0/003> boot.img
    <ID:0/003> recovery.img
    <ID:0/003> vendor.img.ext4
    <ID:0/003> system.img.ext4
    <ID:0/003> modem.bin
    <ID:0/003> Transmission Complete.. 
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response from boot-loader
    <ID:0/003> dspso.bin
    <ID:0/003> Transmission Complete.. 
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response from boot-loader
    <ID:0/003> cache.img.ext4
    <ID:0/003> odm.img.ext4
    <ID:0/003> FAIL!
    <ID:0/003> 
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
    Flashing with Odin v3.12 generates a pass but then the phone just boot loops or black screens.
    09-14-2019 06:21 PM
  3. mustang7757's Avatar
    That's not a pass
    pontiac005 likes this.
    10-03-2019 02:28 PM
  4. pontiac005's Avatar
    Why are you flashing firmware for your S9?
    10-03-2019 02:53 PM
  5. krisqz's Avatar
    So what does FAIL! means?
    10-04-2019 04:40 PM
  6. mustang7757's Avatar
    So what does FAIL! means?
    It wasn't successful flashing
    10-06-2019 09:38 AM

Similar Threads

  1. Galaxy Note 10 - Can't Add Yahoo E-mail
    By Dominicus Saxon in forum Samsung Galaxy Note 10 & Note 10+ (2019)
    Replies: 11
    Last Post: 09-15-2019, 05:49 PM
  2. Is Samsung Pay using NFC or MST?
    By pauly814 in forum Samsung Pay
    Replies: 3
    Last Post: 09-14-2019, 10:23 PM
  3. Noob Samsung Note 10+ Questions
    By Bear_Down_Chicago in forum Samsung Galaxy Note 10 & Note 10+ (2019)
    Replies: 15
    Last Post: 09-14-2019, 10:19 PM
  4. Why is my Samsung Galaxy J3 emerge in a restart loop?
    By Android Central Question in forum Ask a Question
    Replies: 1
    Last Post: 09-14-2019, 12:09 PM
  5. Galaxy Note 10 - Can't Add Yahoo E-mail
    By Dominicus Saxon in forum Sprint Photon
    Replies: 0
    Last Post: 09-14-2019, 10:05 AM
LINK TO POST COPIED TO CLIPBOARD