MacGyver builds a phone stand

trunkmonkey1972

Well-known member
Jul 16, 2012
166
12
0
Materials:

>The lamest cassette that you'll never admit to buying. Discard cassette, keep the case. NOTE: case must be able to open backwards past 90 degrees (see photo, FujI works well)

> 1.5 sqr inch black Gorilla Tape. Place one strip along front lip of case, folding over to create a small retaining lip. Place small pieces on top of the 2 sides adjacent to the lip to provide scratch protection. (See photo)

Enjoy! Your new Samsung Galaxy S3 is now in good hands - portrait and landscape compatible. It works great, no joke! :D
 
Last edited:
I use a cheap plastic clear stand I got with my ipod touch 4G case. Works just fine. :)
 
Materials:

>The lamest cassette that you'll never admit to buying. Discard cassette, keep the case. NOTE: case must be able to open backwards past 90 degrees (see photo, FujI works well)

> 1.5 sqr inch black Gorilla Tape. Place one strip along front lip of case, folding over to create a small retaining lip. Place small pieces on top of the 2 sides adjacent to the lip to provide scratch protection. (See photo)

Enjoy! Your new Samsung Galaxy S3 is now in good hands - portrait and landscape compatible. It works great, no joke! :D

Forgot to add shoestring & bubblegum for use somehow!
 
Materials:

>The lamest cassette that you'll never admit to buying. Discard cassette, keep the case. NOTE: case must be able to open backwards past 90 degrees (see photo, FujI works well)

> 1.5 sqr inch black Gorilla Tape. Place one strip along front lip of case, folding over to create a small retaining lip. Place small pieces on top of the 2 sides adjacent to the lip to provide scratch protection. (See photo)

Enjoy! Your new Samsung Galaxy S3 is now in good hands - portrait and landscape compatible. It works great, no joke! :D

I will have these available soon: kickstand4u tm Intro - Designs by RemoteSystems tm, Inc.

In case you are lazy, here is a direct link to a multiview of 1st prototype: http://www.remotesystems.com/images/kickstand4u%20multiview.jpg

A 3D view here of the almost final prototype - final production will come in glossy plastic and the common rubber coating feel and will have 4 positions rather than 3 as depicted and will be less in width and stronger (mainly for proping up the heavy iPads) then the 1st prototype: multianicadvideo - YouTube
 
Last edited:
V2.0

Hack job with masking tape, but plenty of clearcoat and front lip is top portion of plastic protector for xgear tempered glass.

S3 on Sprint - 16gb pebble blue + 64
 

Latest posts

Trending Posts

Forum statistics

Threads
956,353
Messages
6,967,737
Members
3,163,517
Latest member
Nehasingh12