New Firmware (1.03) for Pioneer NEX Units

[Insp_Gadget]

There is a new firmware out for the NEX head units, as of today. Firmware 1.03.

NEX | Pioneer Electronics USA

Check your firmware version. Mine was 1.01. I just updated.

According to Pioneer:
This firmware update (version 1.03) contains the following improvements:
• Expanded compatibility with Google Android Auto™
• Fixed a pop noise problem while playing a music file in SD
• Minor bug fixes

 

[Phil Nickinson]

Hmmmmmmm. The 4100 file is listed as 5100. That's also what's in the release notes, but ... :|

 

[Insp_Gadget]

Hmmmmmmm. The 4100 file is listed as 5100. That's also what's in the release notes, but ... :|

Yes, I know. That worried me initially, too; but the same thing happened with the download for the 8100. Apparently, they used the same file folder name within the zip archive, even though the zip archive file itself is titled differently.

I don't know what the differences are, but there were no ill effects. I simply followed the instructions, and everything worked. After updating, the only thing I had to do was step through the initial setup wizard for my unit's built-in navigation system. But all my settings had been retained (except that the navigation system voice had been reset to maximum volume). Once I turned her back down in the settings, all was as it was before.

 

[Phil Nickinson]

Ah, good deal. Time to flash, then!

And ... firmware update successful. A couple tips: Be sure to format to FAT32, and make sure the car is running.

 

[Insp_Gadget]

Ah, good deal. Time to flash, then!

And ... firmware update successful. A couple tips: Be sure to format to FAT32, and make sure the car is running.

Yes, the instructions specifically state those things. Some cars let the radio run for a while after the car is turned off, but then eventually turn the radio off (to save the battery). So you certainly want to have the engine running while you do this, because if the radio shuts off in the middle of the update you could really screw up your unit beyond recovery.

 

[Fleury14]

I haven't updated yet but an I to understand that I need to switch the usb connection from usb2 to usb1 then update and switch the connection back?

 

[Insp_Gadget]

I haven't updated yet but an I to understand that I need to switch the usb connection from usb2 to usb1 then update and switch the connection back?

Do you have an SD card? Use that instead. No need to bother with the USB cables.

(A smart thing to do when installing the head unit is to put USB extender cables on BOTH USB ports, so that both are accessible.)

 

[Fleury14]

Thanks I don't have an SD card just the flash drive right now. Probably best to just grab one & do it that way

 

[Insp_Gadget]

Thanks I don't have an SD card just the flash drive right now. Probably best to just grab one & do it that way

That would be my recommendation. You can grab a cheap 8GB SD card for a few dollars.

 

[Fleury14]

I ended up just pulling the unit out and switching the cable back and forth. Going forward I'll just get the sd card.

 

[koalabear]

Ok I must be an ***** - I cannot figure out how to update the firmware, the "firmware update" selection is dimmed. I formatted a SD card in FAT32 and have the AVIC-5100NEX folder as the only thing on the card. Ideas>}|

 

[Insp_Gadget]

Do you have any other devices mounted to the head unit? Make sure your phone is not plugged into it. Make sure your parking brake is applied. The system requires that before it will let you update the firmware. Also, make sure your engine is running. You don't want the radio to inadvertently shut off in the middle of the update.

 

[koalabear]

God bless you sir. Parking brake? PARKING BRAKE! Shoulda remembered needed that on to set up AA in the first place. Thanks!

 

[Insp_Gadget]

Glad that fixed it for you.

 

[Big-A-Rob]

Does anyone know if the S6 works after this update?

Posted via the Android Central App

 

[Phil Nickinson]

Does anyone know if the S6 works after this update?

Posted via the Android Central App

It does not. http://forums.androidcentral.com/android-auto/509626-galaxy-s6-android-auto-not-working-yet.html

 

[hasnolimits]

Im using USB 3.0 extensers from amazon (nice thick cables). For some reason, whe. I plug in my phone, android auto pops up in the apps section but then immediately disappears. Ive also noticed when i plug in my phone looks likt its starting an app but it doesnt. Basically, i cant get my Sprint galaxy s5 to work on 1.03 with the 8100nex. Are the usb 3.0 extenders to blame?

 

[Phil Nickinson]

Im using USB 3.0 extensers from amazon (nice thick cables). For some reason, whe. I plug in my phone, android auto pops up in the apps section but then immediately disappears. Ive also noticed when i plug in my phone looks likt its starting an app but it doesnt. Basically, i cant get my Sprint galaxy s5 to work on 1.03 with the 8100nex. Are the usb 3.0 extenders to blame?

Have a USB 2 cable you can try?

 

[hasnolimits]

I have the USB extender that came with the Head-Unit. The only problem is that I actually had Santa Fe Autosound install it for me in my 2005 Silverado. I'm wondering how difficult it would be to get in there. I can probably have them do it but i'd want to confirm the 3.0 extenders are the issue..

 

[Jared Mayfield]

Im using USB 3.0 extensers from amazon (nice thick cables). For some reason, whe. I plug in my phone, android auto pops up in the apps section but then immediately disappears. Ive also noticed when i plug in my phone looks likt its starting an app but it doesnt. Basically, i cant get my Sprint galaxy s5 to work on 1.03 with the 8100nex. Are the usb 3.0 extenders to blame?

My unit and phone does the exact same thing. I have a nexus 6 and my head unit is a Pioneer AVH-X8750BT (I'm in Australia) just finished installing it and very disappointed, my mums nexus 5 works but my nexus 6 doesn't. Phil would the phone most likely be to blame here or the firmware on the unit? Please say phone haha I had a Pioneer AVH-X8550BT for 2 years and it never received a firmware update.

Posted via the Android Central App