Samsung Galaxy S9 Bricked Help

andhym3s

New member
Sep 14, 2019
1
0
0
My Samsung Galaxy S9 (SM-G960W) is bricked and every time I try flashing I fail.
I am using Odin v3.13(patched) and running as administrator.

I put the phone in download mode, then open Odin and load the files. I was not able to check which firmware version I was supposed to flash but I'm pretty sure I have the right files. (G960WVLS6CSH1)

Any help would be greatly appreciated.

Here are my Odin settings:
ea0d9b72650777a7d527a8671de32a88.png
d8b81d6d39e95906354fcd0aa0e670f1.png

Full Odin log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!! 
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> aop.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster64.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> sec.dat
<ID:0/003> bksecapp.mbn
<ID:0/003> storsec.mbn
<ID:0/003> vaultkeeper.mbn
<ID:0/003> engmode.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> vendor.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete.. 
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> dspso.bin
<ID:0/003> Transmission Complete.. 
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> odm.img.ext4
<ID:0/003> FAIL!
<ID:0/003> 
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Flashing with Odin v3.12 generates a pass but then the phone just boot loops or black screens.
 

mustang7757

Super Moderator
Moderator
Feb 6, 2017
95,373
10,611
113
This the Canadian model?
My Samsung Galaxy S9 (SM-G960W) is bricked and every time I try flashing I fail.
I am using Odin v3.13(patched) and running as administrator.

I put the phone in download mode, then open Odin and load the files. I was not able to check which firmware version I was supposed to flash but I'm pretty sure I have the right files. (G960WVLS6CSH1)

Any help would be greatly appreciated.

Here are my Odin settings:
View attachment 309824
View attachment 309825

Full Odin log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> dqmdbg.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!! 
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> pmic.elf
<ID:0/003> aop.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> keymaster64.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> sec.dat
<ID:0/003> bksecapp.mbn
<ID:0/003> storsec.mbn
<ID:0/003> vaultkeeper.mbn
<ID:0/003> engmode.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> vendor.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete.. 
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> dspso.bin
<ID:0/003> Transmission Complete.. 
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> odm.img.ext4
<ID:0/003> FAIL!
<ID:0/003> 
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Flashing with Odin v3.12 generates a pass but then the phone just boot loops or black screens.