[zero neck]

Personally, I think the stability is your phone's preference. I have had nothing but good experience with Euroskank, but my wife's phone couldn't boot with the last 2 nightlies. Her phone might need AOKP. She tried booting with Franco as well and nothing. I think both are very stable. But, everyone has their own experience.

Sent from my Galaxy Nexus using Tapatalk 2

With ROMs I think that may be true to a degree, but more so with kernels imo, based in the way that processors are made and have varying floors and ceilings. But I can buy that

I found ***** awesome, but had more inexplicable reboots with that than anything else. Haven't had (or noticed) them with kang.

But your mileage...

[Wicket]

any eta on the fastboot version? I know we just got these but I want to try and do it that way since I have yet to flash a radio from fastboot. I flashed CWM recovery that way on my Nexus and now I want to check off a radio flash as well! Achievement Unlocked!

[zero neck]

any eta on the fastboot version? I know we just got these but I want to try and do it that way since I have yet to flash a radio from fastboot. I flashed CWM recovery that way on my Nexus and now I want to check off a radio flash as well! Achievement Unlocked!

Pretty sure they can be pulled from the full jro03o leak, but haven't tried it.

[2defmouze]

any eta on the fastboot version? I know we just got these but I want to try and do it that way since I have yet to flash a radio from fastboot. I flashed CWM recovery that way on my Nexus and now I want to check off a radio flash as well! Achievement Unlocked!

You can download the zip, open it, just take out the radio .img files and fastboot them

EDIT: Actually wait... if the LTE one is indeed a .p (patch) file then that may not work..

[dash813]

FF FG radios just brought me from intermittent 4g to stable 4g at work.


Solids. Pretty good for 3 minutes of work.

[dmmarck]

You can download the zip, open it, just take out the radio .img files and fastboot them

EDIT: Actually wait... if the LTE one is indeed a .p (patch) file then that may not work..

Yup. Would have to wait for the images or for someone to pull/dump the images.

[ohiomoto]

It's been less than a day so let's see how we all feel about these radios next week, but they do seem much nicer so far.

[dmmarck]

It's been less than a day so let's see how we all feel about these radios next week, but they do seem much nicer so far.

Shh, rational thought is not permitted in the rooting section.

[ConTejas]

Anyone able to educate me as to how new radios (as in software) actually work? I've searched a bit on the net and I haven't found anything on radio hardware/software interaction. What sort of things can be improved (or deteriorated) via software patches/updates? Just a link would be great, too.

[dmmarck]

Anyone able to educate me as to how new radios (as in software) actually work? I've searched a bit on the net and I haven't found anything on radio hardware/software interaction. What sort of things can be improved (or deteriorated) via software patches/updates? Just a link would be great, too.

Don't have a link, but something like signal readout (how it reads the signal, intervals, etc.), thresholds for "holding" a signal, "dropping" a signal, and "grabbing" a signal, etc. The hardware obviously doesn't change--but little things can be improved, particularly handoffs.

[zero neck]

You can download the zip, open it, just take out the radio .img files and fastboot them

EDIT: Actually wait... if the LTE one is indeed a .p (patch) file then that may not work..

In theory you should be able to flash 404 lte then the fg lte , no?

[dmmarck]

In theory you should be able to flash 404 lte then the fg lte , no?

Yup. In theory what they can do is simply fastboot the 4.0.4's then fastboot the pulled images from the JB one. However, I have no idea how to deal with the .p file...in the updater script it extracts the image from there.

Here's the updater script FWIW:

mount("ext4", "EMMC", "/dev/block/platform/omap/omap_hsmmc.0/by-name/system", "/system");
ui_print("Writing LTE radio FC05...");
package_extract_file("radio.img", "/dev/block/platform/omap/omap_hsmmc.0/by-name/radio");
ui_print("Patching LTE radio...");
apply_patch("EMMC:/dev/block/platform/omap/omap_hsmmc.0/by-name/radio:10748160:b525f2286630c594e556839bf84033c5b45fa6e1:10748160:93719bba6975331430a1db680934619418249e4f",
"-", 93719bba6975331430a1db680934619418249e4f, 10748160,
b525f2286630c594e556839bf84033c5b45fa6e1, package_extract_file("radio.img.p"));
ui_print("Writing CDMA radio...");
assert(samsung.update_cdma_modem(
package_extract_file("radio-cdma.img")));
unmount("/system");

[Ridgerunner20]

Update, Twelve hours later and I still haven't dropped signal yet. I'm defiantly seeing an improvement with these new radios. Check out the screen shots below and look at the difference. Btw, these screen shots were taken while I was sleeping, so, I wasn't using the phone almost at all.

[CA1NE]

I've also noticed a visual (little signal bars) enhancement but have yet to test whether or not i actually have full 4g all day at work or home. Very nice update to the radios though..... I'm impressed Verizon.....for now

Sent from my Galaxy Nexus using Android Central Forums

[ggamannom]

anyone having bluetooth problems after flashing the new radios? Mine used to work fine before the JB flash and the radio flash but I'm assuming AOKP JB Build 1 has nothing to do with bluetooth quality...

[greydarrah]

Why all the post about unzipping files and running scripts? Can't you just download the file from rootz and flash it like normal?

[dmmarck]

Why all the post about unzipping files and running scripts? Can't you just download the file from rootz and flash it like normal?

lol yes. He was asking about fastbooting them manually, however.

[chubb]

Flashing now. It will be nice having fast wifi 4g handoffs now, mine would take a minute sometimes.

[youngzayiles]

Idk the new radios have been a bit shaky for me. I'm noticing faster transitions going from 3g to 4g but it seems like my phone is bouncing back and forth more then it used to going down to 3g. No bueno for my battery.

Sent from my galaxy nexus running jelly bean!

[Wicket]

Why all the post about unzipping files and running scripts? Can't you just download the file from rootz and flash it like normal?

lol yes. He was asking about fastbooting them manually, however.

yes, I am wanting to do things manually, something I want to do for Nexus owner bragging rights

thanks for the insights so far guys, not brave enough to try so I'll wait for them to be posted.

[tpinkfloyd]

I spoke too soon, got one call on the way home; same static pop, screeches... had to hang up and call back...

oh well, let's see how this one does in the long run...

I had that problem today on the old radio I haven't updated to the new one yet. So it is definitely the phone.

[tpinkfloyd]

Should I flash the bootloader to the JB one? I am using CM10. Also anyone want to help me with a Kernel? I still haven't picked one.

[dmmarck]

Should I flash the bootloader to the JB one? I am using CM10. Also anyone want to help me with a Kernel? I still haven't picked one.

Yes and franco

Sent from my Nexus 7

[tpinkfloyd]

Yes and franco

Sent from my Nexus 7

Can you direct me to a franco kernel that way I know it is safe? And Can you verify that my radio was updated

[ekinnyc]

Can you direct me to a franco kernel that way I know it is safe? And Can you verify that my radio was updated

Yeah you have the new radios
For Franco, purchase Franco.kernel updated from play store. It's about $2-3 but makes flashing Franco kernel a breeze