1. Phil Nickinson's Avatar

    Note: This will wipe your Xoom

    1. You're going to need to have the Android SDK installed. You can download it here.
    2. Download the official HRI39 build from Motorola here.
    3. Unzip the files in MZ600_HRI39.zip and move or copy them to the /platform-tools folder in your SDK folder.
    4. Connect your Xoom to your computer.
    5. Type adb reboot bootloader. Wait for it to reboot into the bootloader.
    6. Type the following commands, waiting for each to finish before continuing:

    fastboot flash boot boot.img
    fastboot flash system system.img
    fastboot flash recovery recovery.img
    fastboot flash userdata userdata.img
    fastboot erase cache
    You've now successfully flashed your Xoom back to stock. Now it's time to relock the device.

    Type fastboot oem lock, wait for the menu, the press the volume-down button. Then press the volume up button. It'll take a minute or so, then reboot. You're now completely back to stock and ready for the update.
    el_maduro, rrainz, gitit20 and 2 others like this.
    03-11-2011 08:10 AM
  2. TDR's Avatar
    As an addendum, Motorola has also uploaded the stock image files for the WiFi-only Xoom Build HWI69 - US Retail. Make sure to flash the matching software for your Xoom!
    04-29-2011 11:10 AM
  3. rrainz's Avatar
    I rooted my WFI xoom a couple of days ago and now I want to go back to stock and relock. When I follow the directions listed here I get an error that the boot.img can't be loaded. I am using HWI69 which is also what it is running currently. Thanks in advance for any help.
    05-03-2011 06:04 PM
  4. efoss's Avatar
    When I do this, my screen locks up at "Starting Fastboot protocol support."

    It will not proceed with the Fastboot process. Is there anyway to make it proceed? I want to unroot my device so that I can run the update!
    05-13-2011 01:48 AM
  5. mikebeam's Avatar
    When I do this, my screen locks up at "Starting Fastboot protocol support."

    It will not proceed with the Fastboot process. Is there anyway to make it proceed? I want to unroot my device so that I can run the update!
    You need to get usb drivers here USB and PC Charging Drivers - Motorola Mobility, Inc. USA
    05-21-2011 10:05 PM
  6. MrDroid55's Avatar
    06-27-2011 09:18 PM
  7. gitit20's Avatar
    This is good info to know... so you can not update if u are unlocked and rooted? I rooted just to install adfree android and remove unwanted apps...
    07-29-2011 03:00 AM
  8. k66473's Avatar
    I have Korean xoom 3G version, could I apply this instruction to update my xoom?

    Now, it has rooted and version of 3.0.1.

    07-30-2011 02:26 AM
  9. i0n's Avatar
    after flashing a custom rom and rooting.. If all I wanted to do was lock the bootloader with fastboot oem lock, will this cause any issues?
    08-12-2011 03:34 AM
  10. Chuckroid's Avatar
    Mine failed at flashing system.img

    "Failed to process command error (0x120003)"

    Any help, anyone?

    EDIT: I flashed the system.img again and was able to proceed... all else went exactly as written, but after doing the relock, the system comes up to the batwings
    and says "Failed to boot LNX 0x0004
    Starting RSD Mode 2"

    Any suggestions now, a reset takes me right back to same screen... I can't even get to bootloader anymore
    02-02-2012 08:19 AM
  11. cvette93's Avatar
    You can still get to fastboot. You need to hold the power and vol down button until the error appears. It will then go into fast boot. From there you can use the command line again.
    06-05-2012 10:34 AM
  12. chedberg88's Avatar
    Please excuse my Noobness but where do we go to type in "adb reboot bootlaoder"?

    Thank you.
    07-16-2012 10:47 PM
  13. Castorshells's Avatar
    You would do it on your PC with a command prompt.
    07-24-2012 02:52 AM
  14. pixelsyndicate's Avatar
    I had the same issue with the FAILED TO BOOT LNX.

    Here's my solution to the issue you are experiencing - this will get you ready for the pre-soak coming 9/2012

    getting OTA past Honeycomb 3.0.1 (wifi only version back to stock) - Motorola Xoom - RootzWiki

    ps. you have to already be able to ADB and have a usb cable for attaching a usb memory stick
    08-31-2012 06:41 PM
  15. Rick Williams1's Avatar
    Hi guys, this looks perfect however i cannot see where on the motorola dev page i download the stock image really sorry if im being newbie!
    11-24-2012 09:16 AM