[HOW-TO] ╰╮╰╮REVOLUTIONARY╰╮╰╮ Get S-OFF, Recovery and Perm-Root!

jondevere

Well-known member
Jan 18, 2011
1,600
504
0
Visit site
[HOW-TO] ╰╮╰╮REVOLUTIONARY╰╮╰╮ Get S-OFF, Recovery and Perm-Root!

[NOTE]Hey all, this is a HOW TO for all you out there that are ready to take controll of your EVO 3D!

First off.. I did NOT create any of this. This is just HOW TO.

REQUIREMENTS : You MUST have the HTC drivers installed and HTC Sync UNINSTALLED for this to work.

YOU MUST BE HBOOT 1.3 or 1.4. If you have the most recent update of 1.5 you need to unlock via HTC.

A BIG THANKS TO UNREVOKED AND ALPHA REV!
[/NOTE]

[INFO]
HOW TO GET S-OFF

1. Go to Revolutionary and select your PC type... This will start the download of the Revolutionary.zip

2. Next is to apply for a Beta Key, this is NOT AN OPTION. You will need your HBOOT version number ie. 1.30 or 1.40, as well as your Serial Number. The serial Number is printed on your EVO under the battery.

3. Boot up your 3D and make sure USB Debugging is ON. Now you can connect your 3D via USB. Make sure its in Charge Only Mode.

4. Extract the downloaded ZIP and run the file "revolutionary"

5. It will prompt you for your beta key.

6. Once this is done it will go thru automated scripts and reboot your phone about 3-4 times before you finally are done.

CONGRATS! YOU ARE NOW S-OFF!

[/INFO]
 
Last edited:

jondevere

Well-known member
Jan 18, 2011
1,600
504
0
Visit site
Re: [HOW TO] Get S-OFF, Flash CWM and Root

[NOTE]RECOVERY AND ROOT

REQUIREMENTS:

S-OFF, Android SDK, HTC Drivers Installed and HTC SYNC UNINSTALLED

First make sure you have the requirements before starting.[/NOTE]

[INFO]HOW TO INSTALL RECOVERY:


Method #1 - Install via Android SDK

Download the Recovery image:TWRP RECOVERY IMAGE


Open a command prompt and change the directory to where you have your "sdk\tools" folder installed.

For me it looks like this... C:\android-sdk-windows\tools\

Place the downloaded image file into the same directory.

Reboot phone into Bootloader. "Vol Down + Power"

Select Fastboot

Once your phone is in Fastboot mode run this command from the command prompt.

"fastboot flash recovery C:\android-sdk-windows\tools\recovery-twrp-shooter-1.0.0.img" - WITHOUT THE QUOTATIONS.

Once it completes tell the Bootloader to Reboot phone.

TADA! Now you have a working Recovery!


Method #2 - Install via HBOOT

Download: RECOVERY.zip
This is the fastest way to get TWRP recovery on your phone. You will still need to have S-OFF to achieve recovery.

You will find above a ZIP labeled "RECOVERY.zip"

Download this file and extract it to you desktop, or wherever you would like.

This will extract the "PG86IMG.zip" file.
Note: This is the recovery image and NOT the stock image that is available to flash via HBOOT as well...

Take the PG86IMG.zip file and place it in the ROOT of your SD Card.

Now all you need to do is Turn your phone off and boot into HBOOT mode ( Vol Down+Power )

From there the phone will recognize the zip as an update zip and ask you if you would like to flash it.

Allow the flash of the recovery and then boot back up into your OS.

From here you will either want to DELETE the zip off of your phone or move it to a folder on your phone labeled recovery via hboot, or something to that affect. The reason for this is that if you do not, everytime you try to boot into recovery you will not be able to because it see's the PG86IMG.zip and automatically runs the script to update. Once this is removed you are good to go and can reboot into Recovery and make a backup. :p

[/INFO]

[WARN]BEFORE ANYTHING ELSE....

Reboot into Bootloader and choose Recovery.

MAKE A BACKUP!
Now you are good to go! Next is root...
[/WARN]


[INFO]
PERMA-ROOT

For root you need to flash this .zip

Download here: Superuser Zip

In order to achieve root..

Download the su.zip and copy the zip file to the ROOT of your SDCARD.

Boot into Recovery

Choose "Install Zip"

Then "Choose Zip To Flash"

Then select the "su-2.3.6.3-efgh-signed.zip"

Once it completes, reboot and you now have ROOT access!

[/INFO]
 
Last edited:

MeltMan274

Member
Apr 22, 2011
18
2
0
Visit site
Revolution Issue (ClockworkMod)

Revolutionary worked like a charm for the S-Off, but it did not flash ClockworkMod successfully (said it did, but I cannot boot to recovery at all now, it just reboots to the Sprint logo and boots the rest of the way up.) Does anyone happen to have the CWM file that it downloads? It's not available in Rom Manager yet. Much appreciated if anyone has any ideas, thanks!
 
Last edited:

jondevere

Well-known member
Jan 18, 2011
1,600
504
0
Visit site
Re: Revolution Issue (ClockworkMod)

you can download Rom Manager from the market to install ClockworkMod
 
Last edited:

jrun

Well-known member
May 27, 2010
298
7
0
Visit site
Can't get Revolution S-OFF to work

Any ideas?


C:\EVO3D ROOT\revolutionary-0.3pre6>revolutionary.exe
=============================================
| Revolutionary S-OFF & Recovery Tool 0.3pre6 |
=============================================
Brought to you by AlphaRev & Unrevoked. Special thanks to #teamwin for their wor
k on fre3vo!

Waiting for device...
Found your device: PG86100 (shooter-1.40.0000, Android: 2.3.3, ROM version: 1.13
.651.7)

This is a beta release and requires a beta release key.
Please visit: Revolutionary for more information.

Enter beta key [ serial: xxxxxxxxxxxx ]: xxxxxxxxxxx
Beta key accepted - thank you for participating!

Acquiring root (method 3)...
rawadb_open: remote closed the connection looking for target "sync:"
Communications with phone unexpectedly interrupted. Try again.
Press (almost) any key to exit.
 

jrun

Well-known member
May 27, 2010
298
7
0
Visit site
Re: Can't get Revolution S-OFF to work

Check your USB cable.. also there is now a sticky for this. Also make sure USB debugging is on and fastboot is off
USB cable is fine, as it finds the device just fine.. How do i know if fastboot is off? I have the phone on and at the home screen, plugged USB cable in. USB debugging is turned ON.. ran the exe and keep getting the above when i try to run it after putting in my beta key.
 

MeltMan274

Member
Apr 22, 2011
18
2
0
Visit site
Re: Can't get Revolution S-OFF to work

USB cable is fine, as it finds the device just fine.. How do i know if fastboot is off? I have the phone on and at the home screen, plugged USB cable in. USB debugging is turned ON.. ran the exe and keep getting the above when i try to run it after putting in my beta key.
Fastboot Setting is under Settings-> Power -> Fast boot

Mine actually worked with it on (I forgot to check for it). I had to uninstall HTC sync though.
 
  • Like
Reactions: stashu11

stoneworrior

Well-known member
Mar 29, 2010
406
35
0
Visit site
Re: [HOW TO] ╰╮╰╮REVOLUTION╰╮╰╮ Get S-OFF, Root and Recovery

Ive got a rooted EVO 3D, Sending my donation in now :-D

11+-+1


11+-+1
 
Last edited:

jrun

Well-known member
May 27, 2010
298
7
0
Visit site
Re: Can't get Revolution S-OFF to work

Fastboot Setting is under Settings-> Power -> Fast boot

Mine actually worked with it on (I forgot to check for it). I had to uninstall HTC sync though.
Was HTC Sync something you had to install manually? I don't see it listed in my app drawer or in manage apps > All > ?
 

sprinttouch

Well-known member
Mar 4, 2011
61
8
0
Visit site
Re: [HOW TO] ╰╮╰╮REVOLUTION╰╮╰╮ Get S-OFF, Root and Recovery

I got stuck at "Acquiring root (method 3)..." for about 45min. :/ ideas?
(usb debugging on, fastboot off, htc usb drivers installed, htc sync uninstalled)
 
  • Like
Reactions: nmjens

MeltMan274

Member
Apr 22, 2011
18
2
0
Visit site
Re: [HOW TO] Get S-OFF, Flash CWM and Root

Download the Recovery image here...
TWRP RECOVERY IMAGE

This worked as well, however I was curious, is this the same image that the Revolutionary program installs, or is this a different image? (Since it failed on my phone I never saw the Clockwork Mod it offered to install, but this looks different than the CWM's I've used in the past).

Either way, great guide!
 

ChrisAC84

Member
Jan 8, 2011
8
0
0
Visit site
Re: [HOW-TO] ╰╮╰╮REVOLUTIONARY╰╮╰╮ Get S-OFF, Recovery and Perm-R

I tried, but all I am getting is "Waiting for device" Fastboot is off, USB debugging is on, and I dunno where to go from here :(
 

MeltMan274

Member
Apr 22, 2011
18
2
0
Visit site
Re: [HOW-TO] ╰╮╰╮REVOLUTIONARY╰╮╰╮ Get S-OFF, Recovery and Perm-R

I tried, but all I am getting is "Waiting for device" Fastboot is off, USB debugging is on, and I dunno where to go from here :(
HTC Sync is not installed on your PC, correct? Also is the "Waiting for device" after it says it's rebooting to fastboot?
 

jondevere

Well-known member
Jan 18, 2011
1,600
504
0
Visit site
Re: [HOW-TO] ╰╮╰╮REVOLUTIONARY╰╮╰╮ Get S-OFF, Recovery and Perm-R

I tried, but all I am getting is "Waiting for device" Fastboot is off, USB debugging is on, and I dunno where to go from here :(
Check to see if you have the drivers installed and HTC Sync uninstalled. Also... check to see if adb can see your device... Sounds like an ADB issue with it not seeing your device...