This is a guide for changing your apn for throttling issues or trying to get a better signal.
Here's a list of the ATT APN list that I put together. I have tested these some work with everything DATA,LTE,MMS,VOICE, ETC. And some of them were request from other members here. So I just posted what was asked for into one location. If they work for you keep them if not, just delete and keep the ones you'll b using. NEVER DELETE THE STOCK APN JUST IN CASE!
If I run across any others I sure to add them here.
If anyone has any that I missed let me know and I'll add them to the list...
#1.Go into setting, then more setting, mobile networks, then pick Access point Names.
#2. In order to enter a new APN, hit the left menu key. Pick New APN, then enter your APN setting as listed below. After that hit Menu again then save! Then you can select that Apn, by hitting the dot next to the new apn
Everyone's results will vary, pending on location...
Default Galaxy Note2 Apn setting! This is what comes stock on the phone!
Name: ATT PHONE
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,mms,supl
Tried this one also and everything works fine but it seems like it stays on H and H+ more often.
Name: AT&T TEST 1
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Now this one connects to the network but it defaults back to the stock apn after a few minutes. Not sure if its just my phone or not so that's why I posted it anyway. Because someone had asked for it..
Name: AT&T TEST 2
APN: broadband
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: tether
Same thing with this one as to Test 2. Connects but then defaults back to stock!
Name: AT&T TEST 3 MM
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC:http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: mms,supl
Now this APN works just like the stock but may speed up your data, if your begin throttled from using to much DATA!
Name: AT&T TEST 4 HSDPA
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: default,supl,agps,fota,dun
NO problems with this one either. Tested everything and all works great! Maybe a little faster pending on what area your in!
Name: AT&T TEST 5
APN: PTA
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMSC proxy: 66.209.11.32
MMS port: 8080
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type : default,supl,mms,hipri
Just trying to help out where I can
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Here's a list of the ATT APN list that I put together. I have tested these some work with everything DATA,LTE,MMS,VOICE, ETC. And some of them were request from other members here. So I just posted what was asked for into one location. If they work for you keep them if not, just delete and keep the ones you'll b using. NEVER DELETE THE STOCK APN JUST IN CASE!
If I run across any others I sure to add them here.
If anyone has any that I missed let me know and I'll add them to the list...
#1.Go into setting, then more setting, mobile networks, then pick Access point Names.
#2. In order to enter a new APN, hit the left menu key. Pick New APN, then enter your APN setting as listed below. After that hit Menu again then save! Then you can select that Apn, by hitting the dot next to the new apn
Everyone's results will vary, pending on location...
Default Galaxy Note2 Apn setting! This is what comes stock on the phone!
Name: ATT PHONE
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,mms,supl
Tried this one also and everything works fine but it seems like it stays on H and H+ more often.
Name: AT&T TEST 1
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
Now this one connects to the network but it defaults back to the stock apn after a few minutes. Not sure if its just my phone or not so that's why I posted it anyway. Because someone had asked for it..
Name: AT&T TEST 2
APN: broadband
Proxy: wireless.cingular.com
Port: 80
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: tether
Same thing with this one as to Test 2. Connects but then defaults back to stock!
Name: AT&T TEST 3 MM
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC:http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: mms,supl
Now this APN works just like the stock but may speed up your data, if your begin throttled from using to much DATA!
Name: AT&T TEST 4 HSDPA
APN: phone
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC: ~Not set~
MMS Proxy: ~Not set~
MMS Port: ~Not set~
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type: default,supl,agps,fota,dun
NO problems with this one either. Tested everything and all works great! Maybe a little faster pending on what area your in!
Name: AT&T TEST 5
APN: PTA
Proxy: ~Not set~
Port: ~Not set~
Username: ~Not set~
Password: ~Not set~
Server: ~Not set~
MMSC:http://mmsc.mobile.att.net
MMSC proxy: 66.209.11.32
MMS port: 8080
MCC: 310
MNC: 410
Authentication type: ~Not set~
APN type : default,supl,mms,hipri
Just trying to help out where I can
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2