Any good screen protectors.

[Nwilkinson15]

I am still using the one that came preinstalled on the note 10+ just worried it isn't good enough. Any suggestions?

 

[EMGSM]

I am still using the one that came preinstalled on the note 10+ just worried it isn't good enough. Any suggestions?

I my experience, the one that came with the Note works pretty well. It was the same for me with the S10+. What kind are you looking for tpu or glass?

 

[bandofbrothers2112]

Theres a few recent long running threads on this subject that may hold some good recommendations and experiences.

Personally I use the Whitestone Dome Glass Screen Protector on my N10+ 5G.

A good tip is to press gently on the fps area after the first curing using the UV light and then second cure.

I hope you find one that suits your needs and pocket wether it's a Tpu option or Tempered Glass.

 

[Nwilkinson15]

Looking for a tempered glass. Will using the ones that have to cure mess up the screen? I'm a noob to this I usually just go to best buy and have them install one that they sell, but there are none for the note 10+.

 

[j_hansen]

Not using one at the moment, the pre-installed one I ripped off straight away as it felt plasticcy, I accidentally ordered 2 Tozo tempered glass ones when I ordered the Tozo cases so will try one out when it arrives

 

[rabernet]

Looking for a tempered glass. Will using the ones that have to cure mess up the screen? I'm a noob to this I usually just go to best buy and have them install one that they sell, but there are none for the note 10+.

I had Whitestone Dome on my Note 8, and took it off before I traded in my Note 8 for the Note 10+ and the screen underneath was pristine. So, no, it does not mess up the screen.

I used to always have Verizon install my screen protectors as well. I did the WSD on my own and found it very easy to do, since it comes with a frame that you set the phone in. If you choose that route, just watch install videos a few times and make sure you have everything laid out. Go through the motions to make sure you don't miss any steps, then go for it!

The first thing I ordered after the phone was a WSD screen protector. I haven't installed it yet, because I'm still using the factory installed one. Once I tire of that, I'll install the WSD.

 

[X1tymez]

I'm using gadgetshieldz screen protector more than a month. It just costs around 11$ and it covers the back, side frames too. I'll drop you the link if you're interested.
https://www.gadgetshieldz.com/galaxy-note-10-plus-screen-protectors-guards.html

How well it worked with S Pen? Any after marks?

 

[bandofbrothers2112]

Looking for a tempered glass. Will using the ones that have to cure mess up the screen? I'm a noob to this I usually just go to best buy and have them install one that they sell, but there are none for the note 10+.

No messing up my phones I've used the Whitestone Dome on.

Use the supplied foam pads and ensure your surface is level so the glue does not run off the display to one side.

Use one of the supplied tubes of glue on the surface to see if it rolls or not and or use a spirit level.

After the first curing use one of the supplied cleaning pads to remove any blobs of excess glue if theres any there.

On removing a Whitestone Dome Glass Screen Protector the glue remains attached to the protector and not the phones screen.

The resposivness of the screen is the same as without a protector on it. Just remember to turn on the setting to increase sensativity and re do your fingerprints if necessary.

 

[EMGSM]

I still got the screen protector that came with the phone. But I also got some Spigen protectors once the one on the phone wears off. IQ Shield, and Skinomi also work well.

 

[j_hansen]

I installed a Tozo screen protector today and it worked just fine EXCEPT from the FPS so ripped it off a few hours later and binned it

 

[Nwilkinson15]

I decided to order a WSD let's see if I mess up the install lol.

 

[bandofbrothers2112]

I decided to order a WSD let's see if I mess up the install lol.

Let us know how you get on.

Preparation is key here and a flat surface !

I'm sure you may have seen this tip but just to recap.

When I fitted mine I gently pressed down on the fps scanner area after the first curing with the uv light as this helps then with the scanner working imo.

Then 2nd cure using the uv light.

Good luck.

Remember _ flat surface and patience.

 

[Vizi]

So the factory installed screen protector got damaged today and I had the below screen protectors waiting to install. I have to say... These are awesome!!!! If you get them, watch the video before install.

 

[EMGSM]

So the factory installed screen protector got damaged today and I had the below screen protectors waiting to install. I have to say... These are awesome!!!! If you get them, watch the video before install. View attachment 310962

Thanks for sharing.

 

[Mike Dee]

Whitestone Dome

 

[Vizi]

I have the Whitestone Dome also waiting. I just figured I'd try these first. Actually I tried the Skinomi first but didn't like the look after install.

Whitestone Dome

 

[EMGSM]

I have the Whitestone Dome also waiting. I just figured I'd try these first. Actually I tried the Skinomi first but didn't like the look after install.

keep us posted on how the Whitestone Dome is.

 

[runfar262]

I purchased the Olixar tempered glass screen protector. However, I haven't put it on my Aura Glow Note+ yet because the factory screen saver is so nice and smooth and holding up well with my ghostek atomic slim 3 military grade case.

 

[EMGSM]

I purchased the Olixar tempered glass screen protector. However, I haven't put it on my Aura Glow Note+ yet because the factory screen saver is so nice and smooth and holding up well with my ghostek atomic slim 3 military grade case.

I have extra screen protectors for when the factory screen protector wears off.