Lg Optimus C660 totally bricked, please help me.

[masterdam17]

Hello, my problem is simple yet very complicated... I used KDZ_FW_UPD to flash the firmware on the lg, but as the LG page lasted at least 5 hours in downloading the rom, i downloaded a rom with the same filename from mediafire... As i flashed it in emergency mode, as told in a tutorial, the error 1002 appeared. Scared i tried again the flash but nothing happened and again threw the error to me. I then unpluged the battery to exit emergency mode. This part i dont really remember it... I think i first booted the LG without problems, but when i shutted it down it basically died.
It cant be turned on, nor in emergency not even charge the cell on the wall... The computer doesnt recognize anything when i plug it in and hard reset doesnt work. Its really dead.
I tried again flashes and everything but none would detect my device as it doesnt even make a sound when i plug it in the usb..
Any suggestions ????

I appreciate your help and the time you took to read my problem, thanks in advance.

 

[anon(94115)]

Its dead, you never cut all power to a phone when flashing.

Good luck with your next phone

 

[masterdam17]

sooo not even a Jtag can save it now?? Because i think i will send it to be done...

 

[anon(94115)]

I would shoot an email to whoever you send it to first and ask them. I do not know the revival rate for lg phones. If it was a Samsung, they always bounce back

Sent from my thumbs with no brain censorship

 

[masterdam17]

Any other thoughts ,apart from its broken??

 

[anon(94115)]

You could look and see if the unbricable mod support the phone

Sent from my thumbs with no brain censorship

 

[masterdam17]

Nope it doesnt cover c660 phones... Well i checked contacts and the battery seems to be charged, the pins to charge the battery on the phone give voltage and there is connection between both. When i inserted an electricity conductor between the battery and the pins on the phone i detected that when i pressed the ON button it freezed at 2.5 V . So that means the phone is turning on.. its just unconscious... Any ideas?

 

[anon(94115)]

it isnt a question of getting power to the hardware, there is no software to run it. When you yank the cord during flashing, you mess the the OS up beyond repair usually

 

[anish17]

Dude the exact same thing happened to me yesterday..I did the same thing as u did and I ended up with no powering on on my lg c660 optimus pro.did you get yours to work?if not did u send it for warranty??plzz help me to fix mine