- Jan 11, 2011
- 4,434
- 1,382
- 113
Everyone should already know DroidXcon was the one who originally gave us Fascinate owners these ODIN packages. Unfortunately his phone became hard bricked when it fell off his desk while helping someone here in the forums. I offered to help, and DroidXcon spent several hours walking me through the necessary steps to create the ODIN packages. This once again demonstrates his selflessness and willingness to do anything to help us. So all credit goes to him, I am simply following his exact instructions and continuing his work.
[note]Besides DroidXcon, I want to also give credit where credit is due. Android Central Moderator Adrynalyne, one of the great devs working on the Fascinate among other phones, took time out of his busy schedule to Debloat, Debing, and Deodex the ED01 official Froyo OTA release to give us that ROM. Adrynalyne again and the rest of TeamSbrissenMod - sbrissen, nisuj17, nemesis2all, gizmodroid, sunder74, gunnermike53, & js123, and anyone else who had a part in putting together or testing this collaborative effort known as Community ROM or Ultimate KangBang. Devs jt1134 and GizmoDroid collaborated and provided us with the current, functioning CWM linked to in this thread. imnuts for his kernel which seems to have been the key to get the Comm ROM packages to flash and load. So thank you so much to all of you for everything you have done and continue to do for the Fascinate and the Fascinate community......[/note]
[warn]Android Central and I disclaim all liability for any harm that may befall your device, including, but not limited to: bricked phones, voided manufacturer warranties, exploding batteries, etc. We all flash things onto our phones at our own risk. Also if you are coming from a voodoo setup, you will need to disable voodoo lag fix prior to flashing. After clean install and full reboot, you can boot to cwm, flash your voodoo kernel of choice, then enable lag fix and reboot. I NOW INCLUDE IMNUTS' -50mv NONVOODOO KERNEL IN THE COMM ROM PACKAGES BECAUSE IT SEEMS TO WORK TO ALLOW THE ROM TO FLASH IN ODIN AND COMPLETELY LOAD. AFTER THE ROM COMPLETELY LOADS, YOU CAN STICK WITH THAT KERNEL TO SEE HOW IT WORKS FOR YOU OR YOU CAN SAFELY BOOT TO CWM AND FLASH THE VOODOO OR NONVOOODOO KERNEL OF YOUR CHOICE.[/warn]
DroidXcon's original ODIN content here: http://forum.androidcentral.com/ver...tom-roms-w-root-clockwork-updated-3-25-a.html
ED01 DB/DO original content here: http://forum.androidcentral.com/ver...tock-ed01-rooted-ed01-debloated-debinged.html
CWM 3.x original content here: http://forum.xda-developers.com/showthread.php?t=1046905
Community ROM original content here: http://forum.androidcentral.com/ver...-rom-5-07-2011-ed01-community-rom-v1-3-a.html
Community ROM 2.0 original content here: http://forum.xda-developers.com/showthread.php?t=1108991
Imnuts original PeanutButta Jelly Time kernel content here: [KERNEL][04-26-11][TW][AOSP] PeanutButta Jelly Time - xda-developers
The Debloated packages contain the ED01 Debloated/Deodexed/Debinged rooted ROM from Adrynalyne, the EC01 modem/radio, cwm froyo, and Adrynalyne's EC10 kernel for now.
The Community ROM packages contain Comm ROM, the EC01 modem/radio or no modem/radio, cwm froyo, and imnuts' -50mv nonvoodoo kernel.
There is no stand alone ED01 modem yet, so we have to make do with the EC01 modem for now. Just like DroidXcon's other packages, these are nonvoodoo only. I will make adjustments to the packages as things are released.
**Update 05/17**
- Switched from times_infinity's ComaVolt nonvoodoo kernel to imnuts' -50mv PBJ nonvooodoo kernel in Community ROM packages
- Added wipe versions of the Comm ROM package
- Community ROM packages contain v 1.3
**Update 06/12**
- Added Community ROM 2.0 packages
To install ODIN packages on your device
1.Download and install drivers on your computer HERE
2. Next you will need the ED01 Froyo tar file which will be placed in the PDA section of ODIN:
[tip]After downloading these files you will need to extract the .tar.md5 file from the .rar file. For visual aid instructions on "how to extract the file" and "how to use ODIN", see post #'s 3 and 4 of DroidXcon's original ODIN thread .[/tip]
3.) You will need to download the ODIN application tool found here ODIN or ODIN MIRROR
4.) You will also need the latest recovery, CWM 3.x HERE
5.) If your phone is plugged into your computer, unplug it now.
6.) If your phone is not powered down, power it down now.
7.) Remove battery from phone.
8.) Launch ODIN on PC.
9.) Plug USB cable into phone.
10.) Plug your Fascinate into the PC via the USB cable that came with your phone.
11.) Press and hold the volume down key until (approx 3 secs) you see a gigantic yellow triangle on your phone, and your phone will be in download mode. The first thin rectangle in the upper left of the ODIN applicate should also turn yellow and identify a com port. You can now release the volume key.
12.) Click on the PDA button in ODIN
Triple check that you pushed the PDA button. Do NOT click the Phone button prior to continuing to step 13. If you choose Phone, you will have bought your Fascinate a one-way ticket to hell.

13.) Find and double click on the ED01.tar.md5 file you downloaded in step 2 above & click the Start button. (This should take approx 3 to 6mins)
14.) Phone will power down when finished.
15.) Close ODIN, remove USB cable from phone, reinsert battery, power on phone and let ROM fully load.
16.) Power down phone, remove battery.
17.) Open ODIN.
18.) Reconnect phone to USB cable as described above in step 11.
19.) Click on the PDA button in ODIN. (Don't forget the warning about making sure you clicked the PDA button)
20.) Find and double click the CWM 3.x file you downloaded in step 4 above & once again click the Start button. (This should only take 7 seconds)
21.) Phone will power down again.
22.) Close ODIN
23.) Reinsert battery.
24.) Power phone and wait to boot. (Should take approx. 4 mins)
[note]Besides DroidXcon, I want to also give credit where credit is due. Android Central Moderator Adrynalyne, one of the great devs working on the Fascinate among other phones, took time out of his busy schedule to Debloat, Debing, and Deodex the ED01 official Froyo OTA release to give us that ROM. Adrynalyne again and the rest of TeamSbrissenMod - sbrissen, nisuj17, nemesis2all, gizmodroid, sunder74, gunnermike53, & js123, and anyone else who had a part in putting together or testing this collaborative effort known as Community ROM or Ultimate KangBang. Devs jt1134 and GizmoDroid collaborated and provided us with the current, functioning CWM linked to in this thread. imnuts for his kernel which seems to have been the key to get the Comm ROM packages to flash and load. So thank you so much to all of you for everything you have done and continue to do for the Fascinate and the Fascinate community......[/note]
[warn]Android Central and I disclaim all liability for any harm that may befall your device, including, but not limited to: bricked phones, voided manufacturer warranties, exploding batteries, etc. We all flash things onto our phones at our own risk. Also if you are coming from a voodoo setup, you will need to disable voodoo lag fix prior to flashing. After clean install and full reboot, you can boot to cwm, flash your voodoo kernel of choice, then enable lag fix and reboot. I NOW INCLUDE IMNUTS' -50mv NONVOODOO KERNEL IN THE COMM ROM PACKAGES BECAUSE IT SEEMS TO WORK TO ALLOW THE ROM TO FLASH IN ODIN AND COMPLETELY LOAD. AFTER THE ROM COMPLETELY LOADS, YOU CAN STICK WITH THAT KERNEL TO SEE HOW IT WORKS FOR YOU OR YOU CAN SAFELY BOOT TO CWM AND FLASH THE VOODOO OR NONVOOODOO KERNEL OF YOUR CHOICE.[/warn]
DroidXcon's original ODIN content here: http://forum.androidcentral.com/ver...tom-roms-w-root-clockwork-updated-3-25-a.html
ED01 DB/DO original content here: http://forum.androidcentral.com/ver...tock-ed01-rooted-ed01-debloated-debinged.html
CWM 3.x original content here: http://forum.xda-developers.com/showthread.php?t=1046905
Community ROM original content here: http://forum.androidcentral.com/ver...-rom-5-07-2011-ed01-community-rom-v1-3-a.html
Community ROM 2.0 original content here: http://forum.xda-developers.com/showthread.php?t=1108991
Imnuts original PeanutButta Jelly Time kernel content here: [KERNEL][04-26-11][TW][AOSP] PeanutButta Jelly Time - xda-developers
The Debloated packages contain the ED01 Debloated/Deodexed/Debinged rooted ROM from Adrynalyne, the EC01 modem/radio, cwm froyo, and Adrynalyne's EC10 kernel for now.
The Community ROM packages contain Comm ROM, the EC01 modem/radio or no modem/radio, cwm froyo, and imnuts' -50mv nonvoodoo kernel.
There is no stand alone ED01 modem yet, so we have to make do with the EC01 modem for now. Just like DroidXcon's other packages, these are nonvoodoo only. I will make adjustments to the packages as things are released.
**Update 05/17**
- Switched from times_infinity's ComaVolt nonvoodoo kernel to imnuts' -50mv PBJ nonvooodoo kernel in Community ROM packages
- Added wipe versions of the Comm ROM package
- Community ROM packages contain v 1.3
**Update 06/12**
- Added Community ROM 2.0 packages
To install ODIN packages on your device
1.Download and install drivers on your computer HERE
2. Next you will need the ED01 Froyo tar file which will be placed in the PDA section of ODIN:
Debloated
Use this version if you are coming from an Eclair build (EA28, DL09, DH12, DI01.)
This version will wipe your data, so make sure you back it up:
ED01DB_DO_SHARK.tar
Use this version if you are already on a Froyo Build (DL30, EB01, EC01, or stock ED01.)
This version will not wipe your data:
ED01DB_DOx_SHARK.tar
Community ROM
CR 1.3
These versions will not wipe your data
This version contains the EC01 modem/radio and imnuts' -50mv PBJ nonvoodoo kernel:
CR_EC01_NutsX_Shark.tar
This version contains imnuts' -50mv PBJ nonvoodoo kernel and no modem/radio for those who have the ED01 radio modem or just want to keep their current modem/radio:
CR_NoModem_NutsX_Shark.tar
These versions will wipe your data, so make sure you back it up
This version contains the EC01 modem/radio and imnuts' -50mv PBJ nonvoodoo kernel
CR_EC01_Nuts_Shark.tar
This version contains imnuts' -50mv PBJ nonvoodoo kernel and no modem/radio
CR_NoModem_Nuts_Shark.tar
***Installation instructions for Comm ROM 2.0 recommend a data wipe. If you choose to use a no wipe version and end up with force closes or other problems that is not my fault nor the fault of anyone from the team that developed the ROM. You can correct those problems by then flashing a wipe version. You have been warned, flash at your own risk***
CR 2.0
These versions will wipe your data, so make sure you back it up
This version contains the EC01 modem/radio and imnut's 05/31 PBJ -50mv nonvoodoo kernel
CR20_EC01_NUTS_SHARK.tar
This version contains no modem/radio and imnuts' 05/31 PBJ -50mv nonvoodoo kernel
CR20_NOMODEM_NUTS_SHARK.tar
These versions will not wipe your data
This version contains the EC01 radio/modem and imnuts' 05/31 PBJ -50mv nonvoodoo kernel
CR20_EC01_NUTSx_SHARK.tar
This version contains no modem/radio and imnuts' 05/31 PBJ -50mv nonvoodoo kernel
CR20_NOMODEM_NUTSx_SHARK.tar
[tip]After downloading these files you will need to extract the .tar.md5 file from the .rar file. For visual aid instructions on "how to extract the file" and "how to use ODIN", see post #'s 3 and 4 of DroidXcon's original ODIN thread .[/tip]
3.) You will need to download the ODIN application tool found here ODIN or ODIN MIRROR
4.) You will also need the latest recovery, CWM 3.x HERE
5.) If your phone is plugged into your computer, unplug it now.
6.) If your phone is not powered down, power it down now.
7.) Remove battery from phone.
8.) Launch ODIN on PC.
9.) Plug USB cable into phone.
10.) Plug your Fascinate into the PC via the USB cable that came with your phone.
11.) Press and hold the volume down key until (approx 3 secs) you see a gigantic yellow triangle on your phone, and your phone will be in download mode. The first thin rectangle in the upper left of the ODIN applicate should also turn yellow and identify a com port. You can now release the volume key.
12.) Click on the PDA button in ODIN
Triple check that you pushed the PDA button. Do NOT click the Phone button prior to continuing to step 13. If you choose Phone, you will have bought your Fascinate a one-way ticket to hell.


13.) Find and double click on the ED01.tar.md5 file you downloaded in step 2 above & click the Start button. (This should take approx 3 to 6mins)
14.) Phone will power down when finished.
15.) Close ODIN, remove USB cable from phone, reinsert battery, power on phone and let ROM fully load.
16.) Power down phone, remove battery.
17.) Open ODIN.
18.) Reconnect phone to USB cable as described above in step 11.
19.) Click on the PDA button in ODIN. (Don't forget the warning about making sure you clicked the PDA button)
20.) Find and double click the CWM 3.x file you downloaded in step 4 above & once again click the Start button. (This should only take 7 seconds)
21.) Phone will power down again.
22.) Close ODIN
23.) Reinsert battery.
24.) Power phone and wait to boot. (Should take approx. 4 mins)
Last edited: