- Jan 14, 2011
- 2
- 0
- 0
Metro Full Flash Guide For the Sony Xperia NO NEED TO ROOT TO FULL FLASH
1. Make sure that the phone is in debug and plug phone into the computer.
2. Go to the dialer and press ##3424 then call. This will put the phone into diag mode to provision.
3. Open Device manager on your computer look for the drivers to update.
4. Once it updates, then open CDMA WS and select the port that you Sony is on (use the port that has USB labeled on it). Then press the connect. DON'T PRESS THE READ BUTTON
Program your NAM, EVDO and load your PRL and you're 3G should pop up depending what PRL you're using.
MMS
Under the voice dialer in the apps drawer, speak: APNS and it will open. Change the APN NAME to MetroPCS and the APN to MMS then proceed to MMSC and plug in: http://mms.metropcs.net:3128/mms
That's it the phone should be fully flashed!
1. Make sure that the phone is in debug and plug phone into the computer.
2. Go to the dialer and press ##3424 then call. This will put the phone into diag mode to provision.
3. Open Device manager on your computer look for the drivers to update.
4. Once it updates, then open CDMA WS and select the port that you Sony is on (use the port that has USB labeled on it). Then press the connect. DON'T PRESS THE READ BUTTON
Program your NAM, EVDO and load your PRL and you're 3G should pop up depending what PRL you're using.
MMS
Under the voice dialer in the apps drawer, speak: APNS and it will open. Change the APN NAME to MetroPCS and the APN to MMS then proceed to MMSC and plug in: http://mms.metropcs.net:3128/mms
That's it the phone should be fully flashed!
Last edited: