Which 6 Pro case are you getting?

[hub1]

Is the Tough Armor more protective or is it slimmer? Does the grip seem the same or better than the Liquid Air?

Super hard to tell when looking at them on Spigen's site. I have the Liquid Air but am considering getting the Tough Armor as well.

The Tough Armor is thicker and more protective but the Liquid Air has the grips on the sides and back. The Tough Armor is smooth.

 

[GoNavy79]

Just got my Spigen liquid air for Pixel 6. Very nice. Also just got my Bellroy leather. POS. The bottom 2 inches of the screen sit above the case. Can't even place the phone face-down on a table. Unusable. Of all the cases I have ever bought, this is by far the worst.

 

[YankInDaSouth]

This was delivered today ... So far so good.


https://www.amazon.com/dp/B096F623N...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005001

View attachment 338817

 

[Rodawg71]

This was delivered today ... So far so good.


https://www.amazon.com/dp/B096F623N...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005044

View attachment 338817

Rocking this case for now. Doesn't add any bulk, grip is good, no interference with the TPU screen protector, and I really like the camera protection.

 

[Wiley_11]

This was delivered today ... So far so good.


https://www.amazon.com/dp/B096F623N...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005095

View attachment 338817

Is that Polycarbonate around the edge of the phone? I have a couple saved on Amazon but they are all TPU. I really like the camera lens protection of these style cases. Thanks for the link!

 

[worldspy99]

I have two from Gear4. One is Havana (frosted) and the other one is Crystal Palace (clear). See picture.

 

[Deleted member 2609113]

I bought the Supcase Unicorn Beetle for my P6PRO. I have the same on my Pixel 4a and love it. It is a heavy duty case with screen protector and holster.
Unfortunately I can't put the case on my Pro since the phone is going back for an exchange because of Gboard response issues. When the replacement phone arrives and the case is attached I'll decide if I'm keeping the case or not.

 

[anon(40376)]

Mostly done modifying my cases. The Spigen Liquid Air needs more grip on the edges so I plan to melt in some deeper grooves. Already added the gun grip tape to the back.

The Incipio Grip is mostly fantastic except the back is not grippy. Weird that they name it the "Grip" and don't make it grippy all over. So, I did just that by adding some clear grip tape.

I also added finger loops to the back of both of them (did the same thing over 3 years ago on my Spigen for my Note 8 and it's still holding strong).

Sure is a better idea than those popsockets. If I have a problem with the grip on my new case I ordered; I might give this a try.

 

[Morty2264]

Just got the Moment case! It's pretty nice, although there are a couple of slight disadvantages compared to the Spigen Liquid Air: (1) it feels more slippery, since the sides lack the textured crosshatching that the Spigen has (and the back texture actually doesn't add much grippiness), and (2) the sides of the screen are less protected -- on the Spigen, the case is just about flush with the screen on the sides, while on the Moment, the lip of the case is below the screen (but the Moment still has the raised protective lip at the top and bottom).

These are only minor negatives, though, because overall the case is high quality. And, of course, it's compatible with the Moment lenses I have, which is the main reason I got one.

View attachment 338768

View attachment 338769

What a gorgeous case, and a gorgeous phone to boot! I love your setup, too!

 

[srvctec]

The Tough Armor is thicker and more protective but the Liquid Air has the grips on the sides and back. The Tough Armor is smooth.

Thanks! I wasn't even looking at the Tough Armor but the Rugged Armor is what I was wanting. I always get all their cases mixed up. Think I'll just stick with the Liquid Air since it looks about the same as the Rugged Armor, protection wise.

 

[YankInDaSouth]

Is that Polycarbonate around the edge of the phone? I have a couple saved on Amazon but they are all TPU. I really like the camera lens protection of these style cases. Thanks for the link!

Not sure what the material is, TBH. But it isn't as flexible as your typical TPU case ... Edges are pretty firm and stay in place well.

Yeah, the camera protection is what drew me to this case. The overall look is really nice too IMO

 

[bkdodger2]

Ghostek Exec came in... I like the feel in hand and will run it through the paces..

 

[Way out west]

That case looks great!

 

[bkdodger2]

That case looks great!

I think they did a great job with it ...corners are reinforced..buttons are clicky ...cut outs are spot on ...

 

[bkrickles]

I've had the Rhinoshield Solidsuit for a few days now and it's a great case.
I definitely recommend it for looks, feel and drop protection.
I'm returning my xlevel guardian and caseology vault cases as I didn't love them and I'm going to pick out something else with a clear back.

I'm considering one of these 2 cases. I don't want it clear on the sides, just the back.
I'm ordering both from amazon and I'll return the one I like the least.

https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005351

https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005351

 

[bkdodger2]

I've had the Rhinoshield Solidsuit for a few days now and it's a great case.
I definitely recommend it for looks, feel and drop protection.
I'm returning my xlevel guardian and caseology vault cases as I didn't love them and I'm going to pick out something else with a clear back.

I'm considering one of these 2 cases. I don't want it clear on the sides, just the back.
I'm ordering both from amazon and I'll return the one I like the least.

https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005356

https://www.amazon.com/gp/product/B...ag=hawk-future-20&ascsubtag=UUacUvbUpU7005356

I like my smokey Ghostek... That one is part of my rotation as well lol. Though you know with the back I'm always wiping down with my OCD on fingerprints

 

[MyEyeCaptain]

@Morty2264

Buju Banton radio!

 

[Prath09]

dbrand robot camo skin for the 6 PRO and with the Spigen ultra hybrid case.

 

[Morty2264]

dbrand robot camo skin for the 6 PRO and with the Spigen ultra hybrid case.

View attachment 338836

View attachment 338839

That looks SO COOL.

 

[Jeremy8000]

Finally got shipping notification for the Bellroy case (Terracotta) I ordered on 10/24 for my Pixel 6 Pro. Not really upset about the length of time, as they were upfront about it not being ready to ship for a while; just glad it's on its way.

It was definitely my favorite case for my 3 XL, hoping it is again for the 6 Pro (though the Spigen Tough Armor and Ultra Hybrid have been very nice).