Ok I did a root with unevoked 3 and everything worked fine. The problem is when I downloaded the Cyanogen 3 Rom and installed it. It was loading at the boot screen with the blue droid and circling arrow and is kept lapsing. So I turned the phone off and when I turned it back on it went to the white HTC EVO loading screen and thats where I am. I tried installing PC36IMG.zip and it says "Main version is older! Update Fail!" I can get into recovery. I can connect through USB through that. I also wiped Dalvik and the cache. I need an Expert to help me out!! I need this phone for work...B]
Evo Won't go past white boot screen!
- Thread starter medic32
- Start date
When I first installed Warm TwoPointTwo, the white screen happened to me, too. I pulled the battery and then restarted my phone back up and it loaded then. Cyanogen is currently on version 7 over at http://www.cyanogenmod.com -- maybe version 3 is the issue? Try downloading the current version over at their website and flash that instead...
EDIT: I think in my case it's rebooting out of RA Recovery... everytime I do it freezes at the white screen and I have to battery pull and it's fine after. Clockwork Recovery never did that, but I don't like it all that much because they removed Edify... what recovery mod are you using?
EDIT: I think in my case it's rebooting out of RA Recovery... everytime I do it freezes at the white screen and I have to battery pull and it's fine after. Clockwork Recovery never did that, but I don't like it all that much because they removed Edify... what recovery mod are you using?
Last edited:
A few questions.
1. You do have a recovery?
2. What was the PC36IMG.zip for?
3. Did you wipe Data as well before flashing Cyanogen?
4. When you said Cyanogen 3. You mean a nightly or the stable 7.0.3.1? <- More for my curiosity
Damn I'm stupid. I meant 7.3 or whatever the latest is. I got it from the website.
1) I do have a recovery mode
2) I have just been hearing about needing that PC36IMG rom, so I put it on the SD Root.
3) No I didnt wipe any data before the C7 Flash.
4) Yes. The latest 7.0.3.1
1) I do have a recovery mode
2) I have just been hearing about needing that PC36IMG rom, so I put it on the SD Root.
3) No I didnt wipe any data before the C7 Flash.
4) Yes. The latest 7.0.3.1
Ok Wipe data, cache and dalvik cache and reflash the Rom then the gapps and reboot. That should fix it. Anytime you switch roms (unless its an update to the same rom or that dev says to) you need to do a full wipe.
Don't feel stupid. Its all good
EDIT: For the PC36IMG.zip rom you have, you might want to change the name or make a folder for it on the sd card. Because, if you go back to your bootloader screen it will scan for it. If you hit yes by accident then it will load that rom. Just a FYI.
Don't feel stupid. Its all good
EDIT: For the PC36IMG.zip rom you have, you might want to change the name or make a folder for it on the sd card. Because, if you go back to your bootloader screen it will scan for it. If you hit yes by accident then it will load that rom. Just a FYI.
Last edited:
In recovery select install zip from SD card. Go to downloads and choose the cm7 zip and flash.
Make sure to data format before hand tho.
Sent from my PC36100 using Tapatalk
Make sure to data format before hand tho.
Sent from my PC36100 using Tapatalk
When I try to install the update is says :
assert failed: write_raw_image("/tmp/boot.img" ,
"boot")
E:Error in /sdcard/cm_supersonic_full-86.zip
(status 7)
Installation aborted
assert failed: write_raw_image("/tmp/boot.img" ,
"boot")
E:Error in /sdcard/cm_supersonic_full-86.zip
(status 7)
Installation aborted
igotsanevo4g
Retired Moderator
- Jul 31, 2010
- 3,395
- 601
- 113
Redownload the rom, and gapps. Erase the old ones first.
Boot into recovery and wipe everything that you have and option to wipe except for the SD card. Then flash cm7 then gapps and reboot.
Boot into recovery and wipe everything that you have and option to wipe except for the SD card. Then flash cm7 then gapps and reboot.
Alright Just downloaded the latest C7 from the website.
Wiped everything like you said.
when it comes to installing updates, the status bar goes to halfway and stops for a while, then completes and says again:
assert failed: write_raw_image("/tmp/boot.img" ,
"boot")
E:Error in /sdcard/update-cm-7.0.3.1-Supersonic-signed.zip
(status 7)
Installation aborted
Is there something I'm missing??
Wiped everything like you said.
when it comes to installing updates, the status bar goes to halfway and stops for a while, then completes and says again:
assert failed: write_raw_image("/tmp/boot.img" ,
"boot")
E:Error in /sdcard/update-cm-7.0.3.1-Supersonic-signed.zip
(status 7)
Installation aborted
Is there something I'm missing??
Did you verify the MD5 of the downloaded CM7 zip file?
It is possible that your download isn't completing and ending early or some other thing and that is causing a problem.
It is possible that your download isn't completing and ending early or some other thing and that is causing a problem.
I used an MD5 checker and it's saying they don't match. but at the bottom of my screen it shows complete and the code matches up.....damn this is confusing.
I'm wondering if I deleted something in my SD root or I'm missing something....Don't I just have to have the ROM in the root and thats it??
I GOT IT!! XDA helped me out. This is what I did
Amon RA Recovery, PC36IMG was put in the root
Made sure S-OFF states at the top
booted it.
It returned to recovery mode.
I wiped EVERYTHING EXCEPT the SD CARD.
Flashed C7 and rebooted!
FIXED
Amon RA Recovery, PC36IMG was put in the root
Made sure S-OFF states at the top
booted it.
It returned to recovery mode.
I wiped EVERYTHING EXCEPT the SD CARD.
Flashed C7 and rebooted!
FIXED
Similar threads
Latest posts
-
-
-
-
-
Pictures taken with the Pixel 9 Pro and XL
- Latest: Laura Knotek
Facebook
Twitter
Instagram