Galaxy Tab A 10.1

[mustang7757]

Also make sure if tablet show white progress bar you will need to reboot in download mode to clear
Before flashing again

 

[zebo427]

Ok, rebooted into download mode, screen was solid, started with Home CSC, progress was going and then failed.

 

[MNMobileGuy]

It's not the firmware and it's not the cables and it's not the computer. Based on the errors in recovery mode, your emmc is likely failing (or has failed already). Happens with all devices eventually - it's just a question of time. But subjecting it to freezing temps for that long likely didn't help

 

[mustang7757]

Ok, rebooted into download mode, screen was solid, started with Home CSC, progress was going and then failed.
View attachment 340775

Ok try those sites with firmware , make sure same bootloader or higher if still a issue then needs repair shop , possible hardware failure
Try also the lower version odin

 

[zebo427]

It's not the firmware and it's not the cables and it's not the computer. Based on the errors in recovery mode, your emmc is likely failing (or has failed already). Happens with all devices eventually - it's just a question of time. But subjecting it to freezing temps for that long likely didn't help

Ok, thanks for everyone's help. At this point I'm going to consider it toast and look for a new one. Not sure if these are good for parts, but if anyone is interested reach out to me.

 

[BoFredborg]

Hi,
Got kind of the same problem.
I'm unable to do more than bring the tablet in to the state with cyan background.
Odin fails, so do "initialization of the USB port" I have downloaded USB drivers from Samsung to fit my particular model.

Any ideas of how to proceed?
Thanks!!


Odin log:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4919 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4919 M
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Windows USB driver log: