- Apr 23, 2011
- 171
- 0
- 0
There is allot of info on this and it has the word Root involved
De branding is easy but getting Kies to work after is tricky
well Not realy
There is No rooting Needed to change the CSC so no worries about Knox
Kies fixes this (Yes it is needed)
So here goes
1. Get Kies 3 up and running and make sure your phone connects and is fully Charged
2. Find out the firmware on your phone
3. Download the same unbranded from Sammobile.com
eg Product Code: BTU
PDA: G900FXXU1ANG2
CSC: G900FOXA1ANG3
MODEM: G900FXXU1ANG2
Product Code: O2U
PDA: G900FXXU1ANG2
CSC: G900FO2U1ANG2
MODEM: G900FXXU1ANG2
The Key bit is the CSC both the PDA and Modem are the same
Now long gone are the days of multi CSC now there is only one CSC so CSC changers don't work as the CSC is not in the root partiotion of the phone
So now do a Hard Factory wipe and clear the cache in recovery mode DO NOT REBOOT THE PHONE
pull the battery and then go into Download mode.
Connect the phone to Odin (downloaded from Sammobile)
and blow the stock (BTU) or what ever country rom on to your phone.
Now let it reboot what will now happen is Google will start to play up on the search (Don't Panic)
do another Factroy wipe and cache clean.
Now the Fun bit
Boot keys up now with out the phone plugged in click on tools the Firmware upgrade and initialization
enter your model number and serial number it will report a error that is fine this is because the phone is not connected
clear the error
now plug in your phone on kies you will see that there is a Massive long Firmware that fine
now click tools and Firmware upgrade and initialization again
Now this will then come up with a warning screen saying it will have to reset as it starts you will see behind Kies fixing the issues and sorting out the CSC it Downloads the correct Firmware from them and Restarts your phone and Bingo
CSC is now correct and kies says your phone is a stock unit
This may work to clear out a custom rom but you will have to Clear the knox count later
Samsung Told me this as that is how they do this
De branding is easy but getting Kies to work after is tricky
well Not realy
There is No rooting Needed to change the CSC so no worries about Knox
Kies fixes this (Yes it is needed)
So here goes
1. Get Kies 3 up and running and make sure your phone connects and is fully Charged
2. Find out the firmware on your phone
3. Download the same unbranded from Sammobile.com
eg Product Code: BTU
PDA: G900FXXU1ANG2
CSC: G900FOXA1ANG3
MODEM: G900FXXU1ANG2
Product Code: O2U
PDA: G900FXXU1ANG2
CSC: G900FO2U1ANG2
MODEM: G900FXXU1ANG2
The Key bit is the CSC both the PDA and Modem are the same
Now long gone are the days of multi CSC now there is only one CSC so CSC changers don't work as the CSC is not in the root partiotion of the phone
So now do a Hard Factory wipe and clear the cache in recovery mode DO NOT REBOOT THE PHONE
pull the battery and then go into Download mode.
Connect the phone to Odin (downloaded from Sammobile)
and blow the stock (BTU) or what ever country rom on to your phone.
Now let it reboot what will now happen is Google will start to play up on the search (Don't Panic)
do another Factroy wipe and cache clean.
Now the Fun bit
Boot keys up now with out the phone plugged in click on tools the Firmware upgrade and initialization
enter your model number and serial number it will report a error that is fine this is because the phone is not connected
clear the error
now plug in your phone on kies you will see that there is a Massive long Firmware that fine
now click tools and Firmware upgrade and initialization again
Now this will then come up with a warning screen saying it will have to reset as it starts you will see behind Kies fixing the issues and sorting out the CSC it Downloads the correct Firmware from them and Restarts your phone and Bingo
CSC is now correct and kies says your phone is a stock unit
This may work to clear out a custom rom but you will have to Clear the knox count later
Samsung Told me this as that is how they do this