I have two Optimus V's. One of them I repaired and the ESN/MEID was no good. I zeroed out the ESN, and copied over the good ESN/MEID from phone #2. I then went into the programming menu and entered my number and the MDN number. I also flashed over the same PRL (61007). But for whatever reason, even though everything looks ok and the phone's appear identical when you go to About Phone. Phone #1 will not place a call or connect to the 3G. When you try to place a call it tells you error #16, switch 331, and then connects you to (sprint) Customer service.
Edit: Sprint was able to verify my VM account and now phone calls and text are working. 3G and MMS is not.
You have to use QPST and copy everything from phone #2 to phone #1 by:
(Both phones must be on stock/froyo rom! and only phone#2 connected to PC for now)
Open QPST
On the phone, open phone app, dial ##7678#
Put in the SPC code
Check the box
Now on QPST go to the Ports Tab
If you don't see the phone connected to any ports, press Add New Port...
Uncheck "Show Serial and USB/QC.........."
Click on the connected port your phone is connected to> press OK
On the top press "Start Clients">Service Programming
Your phone should show up on the same port.
Press OK
Press Read from phone>enter SPC
Press save to file and save to where you will remember
Disconnect phone #2>Connect Phone #1
Exit and reopen QPST
On phone #1 dial ##7678#>enter SPC>check the box
Make sure the phone is read by QPST
Open service programming again
Press Ok
Press read from phone>enter spc
NOW press load from file
Select the file you saved
Press write to phone.
You're done.