Slightly Different Charging Symptoms - No charge using usb 3.0 cord
My tablet originally worked well. With the usb 3 and original charger, I could power up from below 50% to full in 3 or 4 hours. Occasionally, if it was not available, I would charge with a regular micro usb. It would charge, but as expected, was very slow.
Now, any time I try to charge with a usb 3, the unit will charge (per the battery lighting on the home page) maybe for a few minutes and stop. Or it will not charge at all. If I use a micro usb, it charges at the slower rate.
Thinking it might be a cord problem, purchased both OEM and aftermarket cords. Tried other chargers. No change. Will only occasionally charge on usb 3 for a few minutes if at all. The unit charges consistently, the slow way, with a micro usb.
OK, now I think it is a problem with the port on the tablet. Purchased new port / ribbon cable, opened unit, and replaced. No change in behavior.
It is a challenge to keep the unit charged with just the micro usb. Have to be on alert and plug in whenever possible.
Anybody else run into this and have a possible software or hardware solution?