uh oh.... I think I broke it....

Toggle sidebar Toggle sidebar
P

putney1477

Well-known member
Jan 29, 2011
336
8
0
Over the past few days my phone has been freezing up on me so I decided to wipe it and start fresh. I was running EC01, kangbang.

I odin'd back to DL09 and OTAd to EC03.
Odin'd CMW ALL....

I boot into recovery and Im at blue. I hit apply update zip to get to red and I get an andriod with a triangle and an exclamation point in it. then it freezes.

Any advice?

This is what I get when I hit apply sdcard:update.zip
E:Error in /sdcard/update.zip
(status2)
Installation aborted
 
Last edited:
putney1477 said:
Over the past few days my phone has been freezing up on me so I decided to wipe it and start fresh. I was running EC01, kangbang.

I odin'd back to DL09 and OTAd to EC03.
Odin'd CMW ALL....

I boot into recovery and Im at blue. I hit apply update zip to get to red and I get an andriod with a triangle and an exclamation point in it. then it freezes.

Any advice?
Click to expand...

Put KB on root of SD card, Reodin cmw from here[RECOVERY][ODIN][ZIP][4.22.11]Voodoo CWM 3.x UPDATED 5.8.11 - xda-developers get the latest cwm 3.x than odin that, put battery back in, three finger salute your phone to cmw, then flash KB all should be fine
 
Lttlwing16 said:
KB does the voodoo conversion automatically.
Click to expand...

OK I did exactly what you said. I odined CWM voodoo.....booted directed into red CWM, wiped data, cache, d cache and went to voodoo and disabled it. (like Ihad done before when I flashed KB) now when I boot up it still brings me to blue, and when I hit apply update, I get the same triangle with ! in it

So I can't even flash kb

EDIT....I re odined CWM, and left the voodoo alone. I never heard the andriod voice that everyone is talking about. flashed KB waiting to boot up now.... see what happens now.
 
Last edited:
putney1477 said:
OK I did exactly what you said. I odined CWM voodoo.....booted directed into red CWM, wiped data, cache, d cache and went to voodoo and disabled it. (like Ihad done before when I flashed KB) now when I boot up it still brings me to blue, and when I hit apply update, I get the same triangle with ! in it

So I can't even flash kb
Click to expand...

Do the three finger salute into red cwm. Once there wipe all again and go to install from zip. Then once there select the install for the KB rom. It seems as if you are trying to install from the default that is why it is not working. You need to install it from CWM. Once installed, do a wipe again and reboot fully. The female voice will tell you that she is enabling lagfix and a few other things, it will boot to the phone. Don't panic if it takes about 10 minutes. After 20 minutes then be worried. Hope this helps. Best way to do I think is:

Odin back to DL09
Then OTA to ED03
Then Odin CWM 3
3 finger boot into cwm immediately,
Wipe cache's and data.
Install zip from sdcard, select KB file
Wipe again
Full reboot
Then once fully rebooted, reboot again into CWM and install the browser or mms patch if you would like.
 
  • Like
Reactions: Landshark
netlagger said:
Do the three finger salute into red cwm. Once there wipe all again and go to install from zip. Then once there select the install for the KB rom. It seems as if you are trying to install from the default that is why it is not working. You need to install it from CWM. Once installed, do a wipe again and reboot fully. The female voice will tell you that she is enabling lagfix and a few other things, it will boot to the phone. Don't panic if it takes about 10 minutes. After 20 minutes then be worried. Hope this helps. Best way to do I think is:

Odin back to DL09
Then OTA to ED03
Then Odin CWM 3
3 finger boot into cwm immediately,
Wipe cache's and data.
Install zip from sdcard, select KB file
Wipe again
Full reboot
Then once fully rebooted, reboot again into CWM and install the browser or mms patch if you would like.
Click to expand...

I'm going to try your way now. I thought I had it all set, got everything restored, then the phone was soooooo slow, and it was saying I had emails but they werent showing up in my gmail list.

re odin'ing cmw 3 now....will let you know how it goes. thanks for all your help with this. I'm not very good at it lol....

followed instructions to a T....still no womans voice..... its rebooting now

EDIT....see this is why I need help.....I didn't have voodoo enabled....heard the womans voice finally :)

thanks so much for all your patience and help I really appreciate it!
 
Last edited:
putney1477 said:
I'm going to try your way now. I thought I had it all set, got everything restored, then the phone was soooooo slow, and it was saying I had emails but they werent showing up in my gmail list.

re odin'ing cmw 3 now....will let you know how it goes. thanks for all your help with this. I'm not very good at it lol....

followed instructions to a T....still no womans voice..... its rebooting now

EDIT....see this is why I need help.....I didn't have voodoo enabled....heard the womans voice finally :)

thanks so much for all your patience and help I really appreciate it!
Click to expand...

That is what we are all here for. To help out each other. How has your progress been? Hows it running for you?
 
That just goes to show that each phone is different. I have updated Fascinates to CM 1.3 with enabling voodoo myself and without. Like netlagger asked though, how's everything working?
 
So far so good, the only other thing I want to flash is the browser, It was mentioned in a previous post. Mines very choppy and slow. I haven't touched the voodoo controls yet....scared to death of that HAHA
 
putney1477 said:
So far so good, the only other thing I want to flash is the browser, It was mentioned in a previous post. Mines very choppy and slow. I haven't touched the voodoo controls yet....scared to death of that HAHA
Click to expand...

Are you talking about voodoo control settings or voltage control settings. Voodoo control settings are easy to set up and pretty self explanatory. Voltage control settings seem to be a bit touchy and vary widely from phone to phone. If you are going to set voltage levels through the voltage control app, start out at -25mv across the board, see how that works for a day or two, and then work your way up to make sure your phone can handle the undervolting.
 
Landshark said:
Are you talking about voodoo control settings or voltage control settings. Voodoo control settings are easy to set up and pretty self explanatory. Voltage control settings seem to be a bit touchy and vary widely from phone to phone. If you are going to set voltage levels through the voltage control app, start out at -25mv across the board, see how that works for a day or two, and then work your way up to make sure your phone can handle the undervolting.
Click to expand...

or just flash comavolt and be happy :)
 
Me too..it works like a charm for me as well as you.. cured my high freq hum away during phone calls..
 
You must log in or register to reply here.

Similar threads

A
Samsung Galaxy S7 boot and freezing issues
Replies
1
Views
2K
Samsung Galaxy S7
Javier P
Javier P
A
How do I get out from the screen adb sidelong filename?
Replies
0
Views
1K
General Help and How To
AC Question
A
A
I have a Samsung Galaxy Avant with T-Mobile, showing down Android with "No command"
Replies
1
Views
2K
More Samsung Phones
B. Diddy
B. Diddy
A
Please help soft-bricked, how can I fix this?
Replies
0
Views
906
General Help and How To
AC Question
A
A
HTC One M8 unusable! How can I get it working again?
Replies
2
Views
3K
HTC One M8
PierceGilliland
P

Latest posts

Trending Posts

Members online

Total: 1,768 (members: 11, guests: 1,757)

Forum statistics

Threads
957,005
Messages
6,971,006
Members
3,163,681
Latest member
Edie Raleigh

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom