You're welcome, just trying to help! I just happened to luck out with my first settings, I was using the comavolt before, I thought I read somewhere that was -100, so I tried that for the big ones, and stepped it up a little for the lower ones and it works great, now I'm going to see if I can be a little more aggressive!
Voltage control settings
- Thread starter cwd500
- Start date
You're welcome, just trying to help! I just happened to luck out with my first settings, I was using the comavolt before, I thought I read somewhere that was -100, so I tried that for the big ones, and stepped it up a little for the lower ones and it works great, now I'm going to see if I can be a little more aggressive!
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Just FYI, I think Comavolt was actually -75mv. That's great you are able to run -100.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Yep, imnuts had three - standard voltage, -50, and -100. I always had great results with comavolt.
Yeah me too, was trying to establish those settings, thinking coma was 100, but I mixed it up with the imnuts that I never tried, I just lucked out haha, battery life has been pretty good with these settings, gonna see if I can squeeze out a little more though. 
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Yeah me too, was trying to establish those settings, thinking coma was 100, but I mixed it up with the imnuts that I never tried, I just lucked out haha, battery life has been pretty good with these settings, gonna see if I can squeeze out a little more though.
Hey whatever works. If you ain't cheatin' you ain't tryin'. Got to squeeze every little bit we can the way these smart phones eat up the battery
I was able to rock the voodoo -100 imnuts but on the new nemesis2all one when i go to -100 I get SOD, im stable at -75. pretty strange...
I have it at -100 on bottom 3 and than from 1000mhz down -75, dont know which ones jammed me up and dont really want to find out...unless someone knows
I'm 125 on lower three, I'm gonna try experimenting tomorrow, will post results as I get them.
When you get a voltage profile that works well please post all the information you can: Scheduler, Clock Limit, checked states, and what undervolting is set on each clock state..
This is so others can at least attempt to duplicate.
Thanks,
J
Will do Jae! I have a good starting base that is working great for me now, all info is posted on first page of this thread I believe, just going to see if I can go even deeper!
wow yah -100 doesnt work for me
Edit: went up to everything -75 except bottom 4 -100 and SOD, bottom 3 i can do -100 and thats it....
Edit: went up to everything -75 except bottom 4 -100 and SOD, bottom 3 i can do -100 and thats it....
Last edited:
I don't bother running 100, 600 or 900. I can't run them at a much lower voltage than 200, 800 and 1000 so I don't see the point.
I run 4 steps - 200, 400, 800, 1000 - pretty close to standard voltage. My phone runs smoother that way. I can run -200mv at 100mhz, and big UV's everywhere else and I'm "stable" as in I don't get a freeze, but it didn't run as well. Beautiful widgets animation doesn't pop out as smooth, app drawer fly-in will skip sometimes, angry birds will lag in flight here and there. To me the modest increase in battery life isn't worth it. I have a spare and the display is by far the biggest draw anyway, not the processor.
As far as overclock, IMO by the time it starts to make a significant difference (my eyes are the benchmark, not Quadrant or Linpack), it starts to get unstable.
I run 4 steps - 200, 400, 800, 1000 - pretty close to standard voltage. My phone runs smoother that way. I can run -200mv at 100mhz, and big UV's everywhere else and I'm "stable" as in I don't get a freeze, but it didn't run as well. Beautiful widgets animation doesn't pop out as smooth, app drawer fly-in will skip sometimes, angry birds will lag in flight here and there. To me the modest increase in battery life isn't worth it. I have a spare and the display is by far the biggest draw anyway, not the processor.
As far as overclock, IMO by the time it starts to make a significant difference (my eyes are the benchmark, not Quadrant or Linpack), it starts to get unstable.
I am running T3CH9ICIAN'S settings and are having very good results with them.
When I first installed the ComRom, I had pretty good battery life for about a day. The following day, I discovered the Voltage settings (and this thread) and began to experiment. My settings are:
Scheduler: sio
1000MHz: 1275 -50 = 1200MHz
900MHz: 1275 -50 = 1200MHz
800MHz: 1200 -50 = 1150MHz
600MHz: 1175 -75 = 1100MHz
400MHz: 1050 -75 = 975MHz
200MHz: 950 -100 = 850MHz
100MHz: 950 -100 = 850MHz
My Battery has been decreasing at around a percentage point every 5 mins or so, yet it shows be using only 2mA during idle. Should I wipe my battery stats and re-calibrate the battery?
Scheduler: sio
1000MHz: 1275 -50 = 1200MHz
900MHz: 1275 -50 = 1200MHz
800MHz: 1200 -50 = 1150MHz
600MHz: 1175 -75 = 1100MHz
400MHz: 1050 -75 = 975MHz
200MHz: 950 -100 = 850MHz
100MHz: 950 -100 = 850MHz
My Battery has been decreasing at around a percentage point every 5 mins or so, yet it shows be using only 2mA during idle. Should I wipe my battery stats and re-calibrate the battery?
Correct when you find the settings you want to settle with its ideal to wipe battery stats afterwards.
Similar threads
Trending Posts
-
Question I have a new Android phone and want to find a keyboard that I like
- Started by Figgerty
- Replies: 4
-
-
Question Android: How to backup/export browser bookmarks?- Started by androcubc
- Replies: 1
-
-
Facebook
Twitter
Instagram