Welcome to the Android Central Forums Create Your Account or Ask a Question Answers in 5 minutes - no registration required!
Page 9 of 9 FirstFirst ... 6789
Results 201 to 218 of 218
Like Tree16Likes
  1. #201  
    hlxanthus's Avatar

    Posts
    1,790 Posts
    ROM
    RasbeanJelly/DanteRom v4

    Default

    I will look around for the button presses needed to do it blind.
    Thanked by:
  2. #202  

    Default Re: Un-Brick method for SOME forms of brick

    ok i could really use a smart guys help here. i am not new to the rooting game, but i am jus now finding out about E Mode. So i put my optimus s in e mode for the 1st time in a year that i had this phone. i was able to use the lg mobile software update while in e mode my phone was recognized then it when to crap at 30%. i unplugged my cable then reinserted it and now my phone powers on and off but i clicked restart and still nothing stuck at 30 %. am i doing something wrong?


    problem two. while using kp500-utils-en.exe i pressed j and nothing happened i also have the other file i needed to use with this program.


    im jus lost here trying to learn as well if you have any input thoughts comments or concerns theories helpful advice email me at bjwoods167@yahoo.com or facebook me Bruce Woods Jr or by that email on FB as well. o yea need help with adb cmds two i look up threads all the time and i know you guys are smarter than me at this so i would greatly appropriate the help
  3. #203  

    Default Re: Un-Brick method for SOME forms of brick

    Does anyone have an updated location for the kp500 utils v0.4.2 file and the VC cab? Tried looking for them on other torrent sites and couldn't find anything. Thanks.
  4. #204  
  5. #205  
    me2151's Avatar

    Posts
    272 Posts
    ROM
    CM10(u jelly?)

    Default Re: Un-Brick method for SOME forms of brick

    i used this method to unbrick my bad boot flash.
    Normal mode just had LG(bootloop)
    recovery mode was a black screen(recovery was working before the flash)
    my Emergency mode kept resetting atrandom intervals(usually between10-20 seconds)

    Had to do this 20-30 times then did the battery trick.
    Yay. unbricked
  6. #206  

    Default Re: Un-Brick method for SOME forms of brick

    the attachments have errors could u repost them
  7. #207  

    Default Re: Un-Brick method for SOME forms of brick

    Okay guys, I used this method for my bricked Optimus V. I was unable to get passed the LG boot up screen and was unable to use any key presses to get into system recovery or anything like that. So I tried this and it worked perfectly. BUT, now my Virgin Mobile Optimus is now SPRINT. I'm glad I was able to unbrick it, but now how do I change it back to Virgin Mobile? I've tried using most cab files out there but they don't seem to be working. Can someone please help me. Th cab's I used are VM670ZV4_13.S4_13.P61007.cab(this is missing a dll file) and VM670ZV5_07.cab. The sprint one I used came from Zefie..

    Index of /zefie/files/cell/LGLS670/roms/LGUpdater/cab - Persona Files

    LS670ZVD_12.SD_12.P60675.cab

    What can I do? Please help me

    These are the steps I took..

    1) Disconnect phone from PC, power, and battery

    2) Get kp500 utils v0.4.2 (MEGAUPLOAD - The leading online storage and file delivery service)

    3) Get cab http://files.persona.cc/zefie/files/...ter/cab/]Index of /zefie/files/cell/LGLS670/roms/LGUpdater/cab - Persona Files

    4) Save cab as C:\LS670ZVC_11.SC_11.P60674.cab

    5) Run KP500-Utils-EN.exe, need only that exe and all the DLLs from
    zip in step 2

    6) Press J

    7) Model: LS670

    8) Cab: C:\LS670ZVC_11.SC_11.P60674.cab (u can paste this into cmd
    prompt by clicking icon on the top left, edit, paste)

    9) Version: LS670ZVC

    10) When LG fails to find your phone, launch "emergency mode". When
    E-mode is active and the drivers are installed, press the "restart"
    button on the LG update

    11) The LG update will fail and say it lost connection with your
    phone. The phone will say do not remove power. But guess what.. you
    have to. So do so. Then plug it back in without any button voodoo and
    it should go back to the updating warning.( if there is a % on the screen do not pull the cable)

    12) Press restart on LG Updater and enjoy.


    This is the Log File from trying to use the above VM cab files..


    05:11:09 : [C:\LGMobileUpgrade] 丮 õ
    05:11:09 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
    05:11:09 : Start Date : 2012-03-26 05:11:09
    05:11:09 : -------- Buyer Test mode ---------
    05:11:09 : [C:\ProgramData\LGMOBILEAX\Phone] 丮 õ
    05:11:09 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
    05:11:09 : *****CheckOS Start********
    05:11:09 : Microsoft_Windows_Vista Professional_
    05:11:09 : *****CheckPCSyncPrograms Start*****
    05:11:10 : PCSyncPrograms Not Found
    05:11:10 : SetEmerModeAT()
    05:11:10 : _IsConnectedPhone Call
    05:11:15 : _IsConnectedPhone(1)
    05:11:15 : 0 - NotConnected.
    05:11:15 : 1 - Normal connect success
    05:11:15 : 2 - Emergency connect success
    05:11:19 : Checking the connection with the cell phone...
    05:11:19 : dwWaitResetTime(40000 ms)
    05:11:20 : Phone Mode(1)
    05:11:20 : *****GetPhoneType Start*****
    05:11:23 : Phone Type : CDMA
    05:11:23 : *****Start GetPreviousStep*****
    05:11:23 : _GetPreviousStep(dwStep:0xffff)
    05:11:23 : _SetPhoneNumber retval=1
    05:11:23 : *****GetPhoneModel Start*****
    05:11:25 : *****GetPhoneBinaryVersion Start*****
    05:11:25 : Phone Bin Version : LS670ZVD_12
    05:11:25 : *****Get ESN / IMEI / MEID Start*****
    05:11:36 : ESN/IMEI/MEID : 80F5C8B2
    05:11:36 : *****GetPhoneNumber Start*****
    05:11:39 : Phone Number : 80F5C8B2
    05:11:39 : ˻ ĶŸ - ESN_IMEI : 80F5C8B2, Model :
    05:11:39 : *******CheckBinVersion***************
    05:11:39 : New Bin Version(VM670ZV4_13), Current Ver(LS670ZVD_12)
    05:11:42 : _GetAuthMark : wAuthMark(23596)
    05:11:42 : Wait 3Sec
    05:11:47 : _SetAuthMark Ok : wAuthMark(23596), PhoneMode(1)
    05:11:47 : *****Start _GetBatteryLevel*****
    05:11:50 : Battery(5)
    05:11:51 : ResetPhone...
    05:11:51 : Checking the connection with the cell phone...
    05:11:51 : dwWaitResetTime(40000 ms)
    05:12:21 : _IsConnectedPhone Call
    05:12:27 : _IsConnectedPhone(1)
    05:12:27 : 0 - NotConnected.
    05:12:27 : 1 - Normal connect success
    05:12:27 : 2 - Emergency connect success
    05:12:27 : Phone Mode(1)
    05:12:27 : m_dwBootWaitTime(35558)
    05:12:27 : Checking the connection with the cell phone...
    05:12:27 : dwWaitResetTime(30000 ms)
    05:12:57 : _IsConnectedPhone Call
    05:13:02 : _IsConnectedPhone(1)
    05:13:02 : 0 - NotConnected.
    05:13:02 : 1 - Normal connect success
    05:13:02 : 2 - Emergency connect success
    05:13:02 : Phone Mode(1)
    05:13:02 : Call _ModeOffline()
    05:13:03 : *****CheckPCSyncPrograms Start*****
    05:13:04 : PCSyncPrograms Not Found
    05:13:05 : CLGMobileHttp Class Ҹ.
    05:13:05 : CLGMobileHttp Class Ҹ...
    05:13:05 : ****************CheckAndDownload********************
    05:13:05 : ******Extract Start C:\VM670ZV4_13.S4_13.P61007.CAB*****
    05:13:05 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
    05:13:05 : ExtractInfo Error(0)
    05:13:05 : Extract cab file error.
    05:13:05 : [C:\ProgramData\LGMOBILEAX\Phone] 丮 õ
    05:13:05 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
    05:13:05 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
    05:13:05 : CLGMobileHttp Class Ҹ.
    05:13:05 : CLGMobileHttp Class Ҹ...
    05:13:05 : Page_Error κԴϴ
    05:13:05 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
    05:13:09 : =======Cancel button click : m_nStep(5)
  8. #208  

    Default Re: Un-Brick method for SOME forms of brick

    I am wondering if it gets flash by automatic process that occur during Cache recovery

    forms
  9. #209  
    yazyazoo's Avatar

    Posts
    16 Posts
    Global Posts
    33 Global Posts

    Default Re: Un-Brick method for SOME forms of brick

    Tried this an the phone goes to boot up but won't get past the Sprint ID setup screen. What do I need to do to get a ROM on here now. I can't get into usb debugging.

    Thanks.
  10. #210  

    Default Re: Un-Brick method for SOME forms of brick

    Quote Originally Posted by beezy View Post
    FIRST READ ALL OF THIS POST

    You will need to go into EMERGENCY MODE(Will be called E-mode in this guide)
    If you have a extra person around ask them to help you,use you toes if you have to,or buy a monkey.lol
    *To enter E-mode*
    You will hold the following buttons
    hold volume down+camera+search(not the side one)then while plugging into pc press and hold power. You should go into a screen that has EMERGENCY MODE displayed in red letters.

    We are not responsible for your device,don't blame us if your monkey stops eating bannans,your car gets a flat tire,if your sdcard grows legs and walks out your phone.We tried to test this as muchs possible but freak things happen and we can't be at fault.


    1) Disconnect phone from PC, power, and battery

    2) Get kp500 utils v0.4.2 (MEGAUPLOAD - The leading online storage and file delivery service)

    3) Get VC cab (http://files.mysticmidnight.net/zefi..._11.P60674.cab)

    4) Save cab as C:\LS670ZVC_11.SC_11.P60674.cab

    5) Run KP500-Utils-EN.exe, need only that exe and all the DLLs from
    zip in step 2

    6) Press J

    7) Model: LS670

    8) Cab: C:\LS670ZVC_11.SC_11.P60674.cab (u can paste this into cmd
    prompt by clicking icon on the top left, edit, paste)

    9) Version: LS670ZVC

    10) When LG fails to find your phone, launch "emergency mode". When
    E-mode is active and the drivers are installed, press the "restart"
    button on the LG update

    11) The LG update will fail and say it lost connection with your
    phone. The phone will say do not remove power. But guess what.. you
    have to. So do so. Then plug it back in without any button voodoo and
    it should go back to the updating warning.( if there is a % on the screen do not pull the cable)

    12) Press restart on LG Updater and enjoy.


    Once everything is done go back up one post and hit that thanks button for zefie cause without him this wouldn't of been possible. Plus he tested this several times so thank you again zefie. Thanks goes to our phones we bricked that lead us to this.lol
    My phone has no screen working.. Just blank.. The backlight comes on, and the buttons have light. But it has no light.. Can't tell if it goes into Emergncy mode or not :\

    I flashed the wrong kdz now this whole thing got even worse (
    Any advice??
  11. #211  
    epidenimus's Avatar
    Racer of Elevators

    Posts
    1,138 Posts
    Global Posts
    1,139 Global Posts
    ROM
    Paranoid Android / CM7

    Default Re: Un-Brick method for SOME forms of brick

    Quote Originally Posted by auvrea View Post
    My phone has no screen working.. Just blank.. The backlight comes on, and the buttons have light. But it has no light.. Can't tell if it goes into Emergncy mode or not :\

    I flashed the wrong kdz now this whole thing got even worse (
    Any advice??
    What recovery do you have installed and where did you get it? Have you tried any of the screencast software yet?
    If you are inclined to spend a lot of money and want a pretty trophy with which to pass the next few years of your life that talks to you in a condescending voice, can't navigate to save its life, expects full control over all you do, demands $13 for a $3 purchase, allegedly has a single recessed button, needs an expensive computer and a credit card to do anything, hates your music and has purses designed just for it...

    Get married to someone you hate... or get an iPhone.
    -------------------------------------------------------------------------------------
    New to LG's premium Android phone? Check out the Optimus S Welcome Guide.
    Used ROM Mangler on your Optimus S and having problems? Try this.
  12. #212  
    jellymanpoo's Avatar

    Posts
    8 Posts
    ROM
    Cold As Ice CM9, StockICS

    Default Re: Un-Brick method for SOME forms of brick

    I've bricked my LG Optimus S twise! (Like a boss) The first time this method worked. But thiss time im getting to 95% in the updae and my phone will reboot and itll make it to 99% complete then fail. Any fixes to my problem? I've tried this on My Windows XP Professional Pc , My Vista PC, And my Windows 7 Ultimate Pc and all have the same result. Any help? Im still new to Android and dont know anything! And if it helps the last rom I was running was Cyanogen Mod 9 And my last recovery was ClockWorkMode 5.0.0.7 Optimus C
  13. #213  
    thenameisnigel's Avatar

    Posts
    1,448 Posts
    Global Posts
    1,458 Global Posts
    ROM
    Stock

    Default

    Quote Originally Posted by jellymanpoo View Post
    I've bricked my LG Optimus S twise! (Like a boss) The first time this method worked. But thiss time im getting to 95% in the updae and my phone will reboot and itll make it to 99% complete then fail. Any fixes to my problem? I've tried this on My Windows XP Professional Pc , My Vista PC, And my Windows 7 Ultimate Pc and all have the same result. Any help? Im still new to Android and dont know anything! And if it helps the last rom I was running was Cyanogen Mod 9 And my last recovery was ClockWorkMode 5.0.0.7 Optimus C
    There is the problem. Clockworkmod isn't compatible with the OptiS

    Sent from my SPH-D710 using Android Central Forums
  14. #214  
    epidenimus's Avatar
    Racer of Elevators

    Posts
    1,138 Posts
    Global Posts
    1,139 Global Posts
    ROM
    Paranoid Android / CM7

    Default Re: Un-Brick method for SOME forms of brick

    Quote Originally Posted by thenameisnigel View Post
    There is the problem. Clockworkmod isn't compatible with the OptiS
    That's not entirely true. The problem is that he is using a version for an Optimus C, which is not an Optimus S; THAT instance of CWM is not compatible. XIonia or an earlier version of Drew's CWMT are examples of ported CWM that does work. The poster needs to ensure compatibility of the software he is installing, instead of assuming that it's close enough.
    If you are inclined to spend a lot of money and want a pretty trophy with which to pass the next few years of your life that talks to you in a condescending voice, can't navigate to save its life, expects full control over all you do, demands $13 for a $3 purchase, allegedly has a single recessed button, needs an expensive computer and a credit card to do anything, hates your music and has purses designed just for it...

    Get married to someone you hate... or get an iPhone.
    -------------------------------------------------------------------------------------
    New to LG's premium Android phone? Check out the Optimus S Welcome Guide.
    Used ROM Mangler on your Optimus S and having problems? Try this.
  15. #215  
    jellymanpoo's Avatar

    Posts
    8 Posts
    ROM
    Cold As Ice CM9, StockICS

    Default Re: Un-Brick method for SOME forms of brick

    The version I used to use was Clockwork Mod for LG Optimus V and it worked perfectly. But after I got this new one Optimus V recovery wouldnt boot so I instead use Optimus C and controled it via ROM Manager. But to the point I cannot use my Optimus C recovery although I can boot in to it fine. There is no selection key. It is appreciated if anyone could teach me if it is posible to get standard flash by using E-MODE? All replied are appeciated Thank yall for your help.
  16. #216  
    jellymanpoo's Avatar

    Posts
    8 Posts
    ROM
    Cold As Ice CM9, StockICS

    Default Re: Un-Brick method for SOME forms of brick

    Nevermind! I got it unbricked! I just flashed a ZVD baseband cab! Thanks for your help!
  17. #217  
    taylorben159's Avatar

    Posts
    4 Posts
    ROM
    Kraven CM7 barebones

    Default Re: Un-Brick method for SOME forms of brick

    thank you so much. I got my phone back up and running. It is still tweaking out, but is at least usable now
  18. #218  

    Default Re: Un-Brick method for SOME forms of brick

    I have tried every suggestion but i still get an error. Update gets stuck at 4% then tells me to reconnect phone.

    Log:
    15:27:20 : [C:\LGMobileUpgrade] 丮 õ
    15:27:20 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
    15:27:20 : Start Date : 2013-08-06 15:27:20
    15:27:20 : -------- Buyer Test mode ---------
    15:27:20 : [C:\ProgramData\LGMOBILEAX\Phone] 丮 õ
    15:27:20 : RemoveDirectory1 Error(5):C:\ProgramData\LGMOBILEAX\Phone
    15:27:20 : *****CheckOS Start********
    15:27:20 : Microsoft_Windows_Vista Professional_
    15:27:20 : *****CheckPCSyncPrograms Start*****
    15:27:20 : PCSyncPrograms Not Found
    15:27:20 : SetEmerModeAT()
    15:27:20 : _IsConnectedPhone Call
    15:27:20 : _IsConnectedPhone(0)
    15:27:20 : 0 - NotConnected.
    15:27:20 : 1 - Normal connect success
    15:27:20 : 2 - Emergency connect success
    15:27:27 : Verifying phone connection...
    15:27:27 : dwWaitResetTime(40000 ms)
    15:27:28 : _IsConnectedPhone Call
    15:27:35 : _IsConnectedPhone(2)
    15:27:35 : 0 - NotConnected.
    15:27:35 : 1 - Normal connect success
    15:27:35 : 2 - Emergency connect success
    15:27:35 : Phone Mode(2)
    15:27:35 : *****GetPhoneType Start*****
    15:27:38 : Phone Type : CDMA
    15:27:38 : *****Start GetPreviousStep*****
    15:27:38 : _GetPreviousStep(dwStep:0x5)
    15:27:38 : *****GetPhoneBinaryVersion Start*****
    15:27:38 : CSE mode -> Version Replace
    15:27:38 : *****Get ESN / IMEI / MEID Start*****
    15:27:50 : *****GetPhoneNumber Start*****
    15:27:52 : Phone Number : 00000000000
    15:27:53 : ˻ ĶŸ - ESN_IMEI : 00000000000, Model :
    15:27:55 : _GetAuthMark : wAuthMark(5774)
    15:27:55 : Wait 3Sec
    15:28:01 : _SetAuthMark Ok : wAuthMark(5774), PhoneMode(2)
    15:28:01 : *****CheckPCSyncPrograms Start*****
    15:28:01 : PCSyncPrograms Not Found
    15:28:02 : CLGMobileHttp Class Ҹ.
    15:28:02 : CLGMobileHttp Class Ҹ...
    15:28:02 : ****************CheckAndDownload********************
    15:28:02 : ******Extract Start LS670ZV9.cab*****
    15:28:02 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
    15:28:12 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LS670ZV9_20.S9_20.P60671.wdb\n
    15:28:12 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LS670ZV9_20.S9_20.P60671.wdb)
    15:28:12 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LS670_W_0_0_2_0.dll\n
    15:28:12 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LS670_W_0_0_2_0.dll)
    15:28:12 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LS670ZV9_20.S9_20.P60671.wdh\n
    15:28:12 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\LS670ZV9_20.S9_20.P60671.wdb)
    15:28:12 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LS670_W_0_0_2_0.dll)
    15:28:12 : Extract End LS670ZV9.cab
    15:28:12 : *****WorkModelDLL Start*****
    15:28:13 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\LS670ZV9_20.S9_20.P60671.wdb)
    15:28:13 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
    15:28:13 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LS670_W_0_0_2_0.dll)
    15:28:13 : m_nPhoneMode(2)
    15:28:13 : Phone mode 1 = Normal
    15:28:13 : Phone mode 2 = Emergency
    15:28:13 : Phone mode 4 = CSE
    15:28:13 : _DetachDLL Call
    15:28:13 : _DetachDLL Call End
    15:28:13 : Call fn_StartUpgrade
    15:28:13 : ### Start Upgrade - CDMA ###
    15:28:13 : ********* CDMA Model.dll input Parameter *************
    15:28:13 : MODEL_EVENT : 32769
    15:28:13 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\LS670ZV9_20.S9_20.P60671.wdb
    15:28:13 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
    15:28:13 : BootWaitTime : 49500
    15:28:13 : UsbHighSpeed : FALSE
    15:28:13 : PhoneMode : 2
    15:28:13 : NewPhoneBinVersion : LS670ZV9_20
    15:28:13 : ClearSI : FALSE
    15:28:13 : AuthMark : 5774
    15:28:13 : ********* CDMA Model.dll input Parameter End*************
    15:28:15 : wParam : 20, lParam = 570
    15:28:15 : MODEL DLL Event : (20, 570)
    15:28:15 : Model Dll Msg Not Found(20, 570)
    15:28:37 : wParam : 100, lParam = 83
    15:28:37 : MODEL DLL Event : (100, 83)
    15:28:37 : CleanModelDll() : Free Model.dll
    15:28:37 : _DetachDLL Call
    15:28:37 : _DetachDLL Call End
    15:28:37 : FreeLibrary Call
    15:28:39 : FreeLibrary Call End
    15:28:40 : wParam : 20, lParam = 0
    15:28:40 : MODEL DLL Event : (20, 0)
    15:28:40 : Model Dll Msg Not Found(20, 0)
    15:28:40 : Page_Error κԴϴ
    15:28:40 : Retry κԴϴ
    15:29:01 : Call Retry Thread
    15:29:01 : Verifying phone connection...
    15:29:01 : Verifying phone connection...
    15:29:01 : dwWaitResetTime(40000 ms)
    15:29:05 : _IsConnectedPhone Call
    15:29:12 : _IsConnectedPhone(2)
    15:29:12 : 0 - NotConnected.
    15:29:12 : 1 - Normal connect success
    15:29:12 : 2 - Emergency connect success
    15:29:12 : Phone Mode(2)
    15:29:12 : *****WorkModelDLL Start*****
    15:29:13 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\LS670ZV9_20.S9_20.P60671.wdb)
    15:29:13 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
    15:29:13 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LS670_W_0_0_2_0.dll)
    15:29:13 : m_nPhoneMode(2)
    15:29:13 : Phone mode 1 = Normal
    15:29:13 : Phone mode 2 = Emergency
    15:29:13 : Phone mode 4 = CSE
    15:29:13 : _DetachDLL Call
    15:29:13 : _DetachDLL Call End
    15:29:13 : Call fn_StartUpgrade
    15:29:13 : ### Start Upgrade - CDMA ###
    15:29:13 : ********* CDMA Model.dll input Parameter *************
    15:29:13 : MODEL_EVENT : 32769
    15:29:13 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\LS670ZV9_20.S9_20.P60671.wdb
    15:29:13 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
    15:29:13 : BootWaitTime : 74250
    15:29:13 : UsbHighSpeed : FALSE
    15:29:13 : PhoneMode : 2
    15:29:13 : NewPhoneBinVersion : LS670ZV9_20
    15:29:13 : ClearSI : FALSE
    15:29:13 : AuthMark : 5774
    15:29:13 : ********* CDMA Model.dll input Parameter End*************
    15:29:14 : wParam : 20, lParam = 570
    15:29:14 : MODEL DLL Event : (20, 570)
    15:29:14 : Model Dll Msg Not Found(20, 570)
    15:29:24 : wParam : 6, lParam = 0
    15:29:24 : MODEL DLL Event : (6, 0)
    15:29:24 : wParam : 100, lParam = 84
    15:29:24 : MODEL DLL Event : (100, 84)
    15:29:24 : CleanModelDll() : Free Model.dll
    15:29:24 : _DetachDLL Call
    15:29:24 : _DetachDLL Call End
    15:29:24 : FreeLibrary Call
    15:29:26 : FreeLibrary Call End
    15:29:27 : wParam : 20, lParam = 0
    15:29:27 : MODEL DLL Event : (20, 0)
    15:29:28 : Model Dll Msg Not Found(20, 0)
    15:29:28 : Page_Error κԴϴ
    15:29:28 : Retry κԴϴ
Page 9 of 9 FirstFirst ... 6789

Posting Permissions