Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
EB01 Q&A and Observations Thread
- Thread starter sjenkins1009
- Start date
Try EB first maybe you'll only have to do it once
Sent from my SCH-I500 using Tapatalk
Sent from my SCH-I500 using Tapatalk
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
ADW EX
I'm wondering if there is something that this build doesn't like about ADW EX. I'm going through the setup right now with just superclean 2.1 nv and the sns facebook patch. My phone is absolutely rocking through the setup at thunderbolt, I mean lightning speed.
I'm wondering if there is something that this build doesn't like about ADW EX. I'm going through the setup right now with just superclean 2.1 nv and the sns facebook patch. My phone is absolutely rocking through the setup at thunderbolt, I mean lightning speed.
I got the same thing when I tried to take a picture. Any luck in resolving it, cory? it gave me three options after I clicked yes. Don't know which one to do, so I backed out. Help and thanks in advance.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
No, you need to unselect Automatic Brightness in the settings.
I actually just did this
If I remember correctly there is only one option with "write" in the title. Use that one.
I didn't loose it. It still does it for me. Make sure you automatic brightness is off. It defaults to on, and it won't do it when it's on. Good luck.
I actually just did this
If I remember correctly there is only one option with "write" in the title. Use that one.
For camera firmware:
This is the bottom button in the prompt. The other two buttons just are for displaying camera and phone firmware versions.
Click the third button, let it download, then reboot. No big deal.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
thanks to DroidXcon who once again saved me. My problem with the force closes was when I did my titanium bu restore I chose all apps with data instead of all missing apps with data. Also seemed like once again ADW EX did not play nicely with EB01. I really liked ADW EX, but hey I'd rather have the latest Froyo without my favorite launcher than my favorite launcher without the latest Froyo.
French
Well-known member
- Oct 30, 2009
- 914
- 27
- 0
Cory Streater said:
My router is set up to mac filter but it does broadcast the SSID. So I don't think that is it. Someone else somewhere also posted about wifi dropping for no reason.
I went all the way back to stock, updated to DI01, then DL09, THEN DL30. I went straight from DL30 to EB01. I was already experiencing horrible battery life on DL30 and Black_Man_X even posted in a thread somewhere about DL30 failing with one of the reasons being battery issues on "some devices".
I'm still experiencing battery issues, I've tried the tweaks I've read in other areas. Either I was getting unbelievable battery before and didn't know it, or I'm getting lousy battery now.
Are you suggesting that for EB01 it might be best to step back to a clean DL09 and load up EB01 from there? Now that I'm convinced MyBackup Pro is doing what it is supposed to be (and doing it well), I actually don't really mind the idea of starting over. I know my programs and what-not work with Froyo so restoring the backup should be o.k.
Last edited:
Okay, I'm only writing this, because this is a documented list of steps I took to get to EB01. I don't want to distract anyone away from the stickies, but if you're an advanced user, curious as to what I did, and don't need all the gory details here you go:
1.) Download and put this EB01 zip on your SD card (note: I think I accidentally named the zip itself EB30.
2.) Download and put this CWM red file on your SD card.
3.) Download DJ09 to your desktop and the flash it with ODIN.
4.) Download this CWM Red file and flash with ODIN
5.) Flash this EB01 radio with ODIN
6.) Use CWM red (boot into Samsung recovery first and then install the update.zip from step 2 to boot into CWM red) to install the EB01 zip you downloaded in step 1.
1.) Download and put this EB01 zip on your SD card (note: I think I accidentally named the zip itself EB30.
2.) Download and put this CWM red file on your SD card.
3.) Download DJ09 to your desktop and the flash it with ODIN.
4.) Download this CWM Red file and flash with ODIN
5.) Flash this EB01 radio with ODIN
6.) Use CWM red (boot into Samsung recovery first and then install the update.zip from step 2 to boot into CWM red) to install the EB01 zip you downloaded in step 1.
OKay...so i have made headway and found my problem wiht the AOSP lock screen. For those who are interested, you need to be on a Deodexed rom to do it. I was using the stock and it just would not locked over till i was using Adrynalyne's Deodexed Froyo update, then the lock screen was correct. So now i am on Butch's superdark theme (since he updated it YAY!) running EB01 with my right lock screen and found a Samsung Keyboard apk that works....I am happy and if people need links to anything just let me know and i can upload it and host it as needed.
Go Devs!
Go Devs!
French
Well-known member
- Oct 30, 2009
- 914
- 27
- 0
Thank you for the offer...no need...I have EVERYTHING. All the way back to stock (whatever that was called).
Cool. I hope it works. I updated post #36 with hyperlinks to all the files I used if anyone else wants them.
@evanture: Lol at your signature
@evanture: Lol at your signature
No, I went from DL30 to EB01 using the instructions here. Probably a work-around somewhere for GV, and Vlingo works perfectly..
Also, my wi-fi connects fine.
Facebook
Twitter
Instagram