Phone facts:
LG-F180, S/N: 0066451ae1d458e3
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&?)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
3) Now I turned to ?[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]? using LGNPST and TeenyBin. Finally something happened ? I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed ? tried several ROMs which all gave errors initially. I discovered that the install script pointed at ?e975? in(ro.product.device and ro.build.product but the phone reports ?geehrc4g?
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ?assert? line in the script, or
b. Changing the element to what the phone reports did not help
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ?[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc?
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I am so confused about somethings that are:
In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180 and after searching goole, i find that MAKO is a Nexus 4. So What ROM i have to download and from where?
Is TeenyBin and LGPNST creates problem? If yes, what to do?
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet. Many people have same problem stated but no solution is given to them..
I will be so thankful to all of you as this forum is my only hope.
My email is mansoor3131@yahoo.com.
LG-F180, S/N: 0066451ae1d458e3
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&?)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
3) Now I turned to ?[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]? using LGNPST and TeenyBin. Finally something happened ? I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed ? tried several ROMs which all gave errors initially. I discovered that the install script pointed at ?e975? in(ro.product.device and ro.build.product but the phone reports ?geehrc4g?
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ?assert? line in the script, or
b. Changing the element to what the phone reports did not help
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ?[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc?
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I am so confused about somethings that are:
In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180 and after searching goole, i find that MAKO is a Nexus 4. So What ROM i have to download and from where?
Is TeenyBin and LGPNST creates problem? If yes, what to do?
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet. Many people have same problem stated but no solution is given to them..
I will be so thankful to all of you as this forum is my only hope.
My email is mansoor3131@yahoo.com.
Facebook
Twitter
Instagram