Question Re-Partition operation failed

[devildoid]

Hi guys, I have a Samsung S7 (SM-G930F). I was using a custom ROM on it, and everything was working fine for a few weeks. However, after a restart, it got stuck in a boot loop. I attempted to boot into recovery, but it wouldn't respond. Subsequently, I tried to flash the stock firmware using Odin, but encountered the following error. Despite trying various solutions available on the web, I haven't been able to resolve the issue

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[mustang7757]

Welcome to AC!
Are you using the latest Odin?
Make sure the cable you are using is known to work and good quality.
Where did you get the firmware?
Try using Frija to obtain the most current firmware as if trying to flash an older one it won't be successful.

 

[devildoid]

Thanks you!
1. I am tried on all the version.
2. Yes I am using good quality cable.
3. https://www.sammobile.com/firmwares/ and from some other websites
4. I will try this!!

 

[mustang7757]

Thanks you!
1. I am tried on all the version.
2. Yes I am using good quality cable.
3. https://www.sammobile.com/firmwares/ and from some other websites
4. I will try this!!

Try frija firmware downloader from xda site get the latest version

 

[devildoid]

Hi, I tried three different firmware versions: the latest one with Android 8, another with Android 7, and one with Android 6. However, none of them worked.

 

[mustang7757]

Hi, I tried three different firmware versions: the latest one with Android 8, another with Android 7, and one with Android 6. However, none of them worked.

Have you tried from Frija ?

 

[mustang7757]

Also you see in your screenshot Knox was tripped but instead of it showing 0x1 yours is 0x030c this indicates something weird happened when u put a custom ROM.

 

[devildoid]

I was using FloydROM V5 https://xdaforums.com/t/rom-10-0-oneui-2-5-g930x-g935x-n930x-n935x-floydq-v5-0.4189497/

 

[mustang7757]

I was using FloydROM V5 https://xdaforums.com/t/rom-10-0-oneui-2-5-g930x-g935x-n930x-n935x-floydq-v5-0.4189497/

You should ask XDA there what that means Knox 0x030e I only know it blown the Knox fuse at 0x1

I still don't know if you tried Frija firmware?