Re: S3 won't connect via USB to my computer
I just about tore my hair out trying to fix this problem. USB worked for a while, until it *didn't* work.
I found these specific instructions on another forum after getting a tip...
Here is my solution:
There are USB settings in a hidden menu.
(It's actually called hidden menu!)
When people flash the phones to another carrier, like Page Plus/Cricket, or when some computer programs interact with the phone, the USB settings can get changed in that hidden menu.
Here's how to set them back, or verify at least, that they are correct already and not your real problem.
Verizon SCH-I535 (Galaxy S3) and SCH-I605 (Note 2)
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial **87284
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select MTP+ADB
Tap OK
Restart Phone
If your phone was on a setting that included "+Modem" this likely solves your problem. It solved mine.
**Supposedly, the above instructions also work on the USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2).
Here are the Sprint Instructions:
Sprint SPH-L710 (Galaxy S III) and SPH-L900 (Note 2)
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select MTP+ADB
Tap OK
If you need S4 instructions, they are available here from the same place I found the above instructions...
Ignore the instructions on flashing. You just want to get your phone out of "modem" mode.
Sprint / Verizon / USCC S2/S3/S4/Note2 to Page Plus/Selectel/Next-G Flashing Real 3G
Cheers guys, I hope this helps. Good luck! :-*