Ruben Silva
New member
- Dec 25, 2013
- 1
- 0
- 0
Hi, I'm a kid and my dads gonna buy me a new phone (yay) however I'm into tech a lot so I'm deciding between nexus 4 or moto g (size does not matter to me at all). As for price. I can buy the moto g new around ?129-?139 16gb and the Nexus 4 USED around ?175-?185 and NEW ?210 16gb.
NEXUS 4 :
I'm drawn to the fact that the n4 has a better camera + 1080p recording, nfc (main thing for me) as well as the fact that it has a faster CPU and has a better GPU on paper. It also has a rgb notification led that can change colours unlike the moto g.
MOTO G:
However I'm also drawn to the Moto G as it has a better screen, better build quality, better speaker, better battery life, FASTER in REALWORLD PERFORMANCE and the fact that it supports USB OTG so I can expand memory via USB drive. It also has more cloud storage. Ive noticed through some vids of the moto g that the gps and the wifi is faster.
I'm really In a puzzle of which phone to purchase. I'd really like to know which device is best for gaming too as this is pretty important to me. Thnx
PLZ HELP!!!!
I'd say as a nexus 4 owner (and potential moto g buyer for a friend) that you will get roughly the same same user experience out of each. The nexus 4 sure has a lot of life in it but it isn't necessarily the most carefully designed phone when you compare it to the moto g.
The nexus 4 will get you places faster when playing games (this is mostly because of GPU not CPU) but the older generation of processors is less efficient so expect to have to charge up every day.
The moto g seems to me like it will be very efficient and the battery drains at a much slower rate.
With you being a big tech person, have you thought much about rooting and installing custom firmware? The nexus 4 has a huge community for this on xda being a nexus device and all (I have spent a lot of time tuning kernels and picking out the perfect rom and features.)
That being said, the moto g offers some of that too. It is boot loader unlockable but will cost you your warranty. There is a limited supply of Roms (and one or two kernels) right now with no "official" cm support the last time I checked but that is likely to change for the better.
Honestly if I had to choose between the 4 and the g right now I would have a hard time with it. You seem to be familiar with the small features of each NFC, camera, and processor, vs efficiency, USB otg (this may have been disabled in KitKat), and nice external design.
If gaming and development is your priority then the beefier specs of the nexus will serve you well. You can do a lot with custom Roms, kernels, and xposed modules which will make it even more desirable. The nexus 4 may not get android updates 8 months from now but you will always be able to load custom firmware on it.
Happy choosing.
Sent from my Nexus 4 using Tapatalk
Thanks so much, you made my decision a lot more clearer for me. I'll probably go for the nexus 4.
BTW, USB OTG functionality on the Moto G kitkat update still works, well the drivers are there they are just disabled and can be enabled through apps like "nexus media importer" and "total commander". Oh, and I am pretty familiar with custom roms and kernals...thnx for asking.
Once again thank you for your help, I appreciate it.
Sent from my hp touchpad running CM11.2 nightly.
I'm still not sure, but after doing more research on Battery University website, I have concluded that there may in fact be some additional degradation (beyond normal reduction with time) in long-term battery capacity by using a 2A charger with the Moto G.
Please see this post for my logic and references:
http://forums.androidcentral.com/google-nexus-5/334538-nexus-5-sure-does-charge-fast-2.html
CORRECTION AND UPDATE:
But here is an update since I first added the above post. (This correction is now added to the above post but repeated here for consistency.)
I have more authoritative information directly from Battery University that changes the conclusion I drew based on my effort to extrapolate from the Battery University 'Fast and Ultra-Fast Chargers' website article.
The extrapolation I did was based on the additional loss of battery capacity cited when going from a 1C to 2C charging rate. But according to direct communication from Battery University, when charging at a rate below .7C there should be no measurable improvement to long-term capacity by using slower charging rates. Charging above .7C would still be expected to add more stress to Lithium Ion Polymer batteries and likely add to long-term reduction of capacity.
So, what this means for the Moto G and Nexus 5 is that there should be no measurable difference between charging with 2A, 1.2A, 1A, or 850mA chargers as far as effect on long-term battery capacity goes. Both the Moto G and Nexus 5 are supposed to automatically restrict the charge rate at 1500mA even when using a faster charger, which is just at or below .7C for both phones. So, as long as the charger dependably keeps to 5V, a higher amperage 2A charger will be faster but pose no problem to long-term capacity.
Hey Matt,
1. So can an Apple usb wall charger be used for Moto G?
The apple charger output is 5.1V and 2.1Amp .
2. I have read everywhere that Moto G can draw upto 1.5Amp. Even if you use a 2amp charger, the phone's software will draw only as much as its required (which is 1.5 in this case) and it wont harm the phone.
The question is - When the phone is switched off and the software is not running, can we still use a 2amp charger? How will the phone then be able to regulate how much amps to take in, bcos the software is switched off.
Request everyone to share knowledge on this, especially Point 2.
Thank you
Hey Matt,
1. So can an Apple usb wall charger be used for Moto G?
The apple charger output is 5.1V and 2.1Amp .
2. I have read everywhere that Moto G can draw upto 1.5Amp. Even if you use a 2amp charger, the phone's software will draw only as much as its required (which is 1.5 in this case) and it wont harm the phone.
The question is - When the phone is switched off and the software is not running, can we still use a 2amp charger? How will the phone then be able to regulate how much amps to take in, bcos the software is switched off.
Request everyone to share knowledge on this, especially Point 2.
Thank you