In recovery I got the sd to mount to the computer. I also was able to get CleanRom 4.3 boot up and connected to the computer without bootlooping by not setting up my Gmail accounts.
Since having both of this options available to me now and thank you both for your instructions and suggestion. What is the best road to take to get CleanRom working. Going back to the Stock RUU and then running CleanRom and patch or find the the latest ICS Leak and RUU and run CleanRom and skip patch?
Wanda Is this what you are suggesting in your original response? When I went to attempt to download the stock RUU and run it, my image version is 3.11.605.22 to image 1.02.605.6. I stopped to not hose things up worse.
If I go and find the latest ICS Leak where do I get it?
If you go the RUU route then you don't need to do the patch. The patch was only for people who did not run the RUU but still wanted to jump to an ICS based ROM.
The RUU route involves relocking your bootloader, running the RUU update, unlocking again, then re-installing Amon-Ra, then re-rooting. It's a multi-step process that, while not overly difficult, can definitely get problematic. It also completely wipes the INTERNAL SD...not the external but internal so if there's anything you want on there better get it off before you start. I didn't and lost all my Titanium Backups including all 4 versions of my Angry Birds. Let me know if that's the direction you want to take and I'll get the link to the instructions I used...they're very detailed and were written for knuckleheads like me.
The easiest way, and the way I'd suggest to you for now, is to re-flash CleanROM however after it's flashed and before you boot back into the ROM to set everything backup, you need to flash the patch. This is from Scott's instructions on how to flash it properly.
Place ROM on SD Card
Reboot to recovery
Wipe all data / Factory reset - Do not restore anything from back up. Do not ask in the thread if you can. You will be referred back to here!
Flash ROM.
When ROM Completes you will have the option to install old firmware patch if needed. It will be located on the SD Card in the CleanROM Folder.
Now you will need to manually boot to bootloader. Do this by selecting Reboot to Bootloader via the Recoveries Development Menu (Amon Ra).
Device will then boot to fastboot.
Press Power to install the kernel / boot.img
Reboot
Profit!
After you're up and running (I'm going to assume everything flashes fine) don't forget to remove the PH98IMG.zip off your SD card.