6P Screen Protector

fabian bonifacio · Nov 17, 2015

My supershieldz screen protector just came today, the cut outs are perfect and even a proximity sensor cut out

Posted via the Android Central App

Savvra · Nov 17, 2015

Amylase453 said:
I installed the Yoozon and it wouldn't adhere to the lower right corner, though it's probably my phone and not the protector. I am currently using the Mr. Shield crystal clear cover but it's a massive fingerprint magnet compared to the Yoozon. Both had/have the proper cut outs.

View attachment 205901

I have the exact same problem with an Intelliarmor. I'm getting a replacement screen protector to see if it helps.

Posted via the Android Central App

atg284 · Nov 17, 2015

Savvra said:
I have the exact same problem with an Intelliarmor. I'm getting a replacement screen protector to see if it helps.

Posted via the Android Central App

Was it the old intelliarmor TGSP or the ones currently shipping out?

lipmonger · Nov 17, 2015

I'm using the i Voler tempered glass protector... buttery smooth so far - hasn't missed a touch yet...

Savvra · Nov 17, 2015

atg284 said:
Was it the old intelliarmor TGSP or the ones currently shipping out?

It was an early one but with the correct cut outs.

Posted via the Android Central App

redhawk24 · Nov 17, 2015

lipmonger said:
I'm using the i Voler tempered glass protector... buttery smooth so far - hasn't missed a touch yet...

View attachment 206109

I ordered this exact one, so good to see no issues! I also have a thin hybrid case, do you think that it will cause any problems?

Posted via the Android Central App

nickacs · Nov 17, 2015

I saw the IntelliArmor now shows a cutout at the bottom?!? WTF

intelliGLASS - Nexus 6P. The Smarter Real Glass Screen Protector

Man, I preorder this thing back on 10/24 and hasn't shipped yet. Cmon on, WTF guys? Is this thing coming from overseas by a friggin paddle boat?!?
IF I ever get mine and it has this cutout, I'm returning and just going with either Spigen or iVoler, as both have had great recommendations the last couple days.

SRFast · Nov 17, 2015

I am also using the iVoler protector. No problems.

Posted via the Android Central App

nickacs · Nov 17, 2015

And so the mass exiting has begun with IntelliArmor. LMAO, total aholes. I've already emailed to cancel before shipment starts. Rep on XDA confirmed they are sending out to even preorder folks the "newly redesigned" version. Mutha $%^s!!! Nice bait and switch these low life's are!
I see most everyone on Reddit has cancelled too. Poorly run business and tactics. Giving my business to someone else

sidsub · Nov 17, 2015

Got the Yoozon yesterday (updated with the proximity sensor cutout). Perfect fit. No issues so far.

lipmonger · Nov 17, 2015

redhawk24 said:
I ordered this exact one, so good to see no issues! I also have a thin hybrid case, do you think that it will cause any problems?

Shouldn't be any problems. I have the Verus case and the REDShield TPU case... both work just fine with the iVoler screen protector. There is about .5mm clear all the way around - between the screen protector and the case. What I'm trying to say is, the case won't "push" into the protector.

I hope that makes sense.

Jerm2410 · Nov 17, 2015

I'm using that ivoler one too with the diztronic case. Love it!

redhawk24 · Nov 17, 2015

lipmonger said:
Shouldn't be any problems. I have the Verus case and the REDShield TPU case... both work just fine with the iVoler screen protector. There is about .5mm clear all the way around - between the screen protector and the case. What I'm trying to say is, the case won't "push" into the protector.

I hope that makes sense.

Yeah, it makes sense. I have both the iVoler and my case (http://www.amazon.com/gp/product/B0...ag=hawk-future-20&ascsubtag=UUacUvbUpU4838914) waiting, but my phone is not here yet. (Got the shipping email today from Huawei, expected delivery is Friday). I don't think I have anything to worry about, but it's hard to know for sure w/o the phone in hand!

dwc_sf · Nov 17, 2015

nickacs said:
And so the mass exiting has begun with IntelliArmor. LMAO, total aholes. I've already emailed to cancel before shipment starts. Rep on XDA confirmed they are sending out to even preorder folks the "newly redesigned" version. Mutha $%^s!!! Nice bait and switch these low life's are!
I see most everyone on Reddit has cancelled too. Poorly run business and tactics. Giving my business to someone else

Sorry I'm confused. I thought the re-designed (i.e. good) ones were about to show up any day now. Is there a problem with this new batch?

Nexus 6P

...or is it just that we are *still* waiting on them to ship. (I am angry about that, and close to canceling)

ezvv · Nov 18, 2015

Does anyone use a regular old screen protector or is everyone on the tempered glass train? Never had a glass one but I have the illumisheild regular screen protector on my MXPE and I'll be using them on the 6p when it arrives also. Great screen protector.

Posted via the Android Central App

nickacs · Nov 18, 2015

dwc_sf said:
Sorry I'm confused. I thought the re-designed (i.e. good) ones were about to show up any day now. Is there a problem with this new batch?

Nexus 6P

...or is it just that we are *still* waiting on them to ship. (I am angry about that, and close to canceling)

Yes, "allegedly", the new version (with the cutout at the bottom), their website says it will start shipping 11/20. However, if you want the "old" design (no bottom cutout), you now have to wait till December. Fck them.

Here is their response as to why they redesigned it:
Tempered Glass Screen Protector - Post #1283 - XDA Forums

I think it's pretty sh!tty to post this response on a forum and not email blast all the customers that ordered, since this does change people's mind about which one to buy. I'll never buy their products again. WHY can all these other companies have theirs in stock and have the proper cutouts (ie. iVoler, Spigen, etc), but IntelliArmor is still dragging their a$$??? Are their screens made of gold or something???

svenEDGE · Nov 18, 2015

I got the iVoler tempered glass. I haven't used a screen protector since maybe my Note II, and I removed it shortly after installing it because there is a noticeable difference in feel and clarity. I can hardly tell that I have a screen protector on at all. Using it with the Spigen clear case makes it even less noticeable. I recommend both.

Eclipse2K · Nov 18, 2015

Eclipse2K said:
First one is screen on no case. Second has a Diztronic case. Third has no case. This is the Pleson Glass. No lifting, Fits great.

https://www.amazon.com/gp/aw/d/B017...ag=hawk-future-20&ascsubtag=UUacUvbUpU4839514

Quoting myself.

I can't say enough good things about this protector. Feels great and fits perfectly. Highly recommended!

Amylase453 · Nov 18, 2015

ezvv said:
Does anyone use a regular old screen protector or is everyone on the tempered glass train? Never had a glass one but I have the illumisheild regular screen protector on my MXPE and I'll be using them on the 6p when it arrives also. Great screen protector.

Posted via the Android Central App

I took off the Yoozon after it wouldn't adhere and installed the Mr. Sheild which is not glass. Yoozon has since sent me a replacement but after painstakingly installing the Mr. Shield and removing the dust, getting it exactly perfect, I'm not in a rush to remove it and go back to the Yoozon. I'm afraid it was my screen that wasn't perfectly flat, not a defect in the Yoozon, which means I'd remove the Mr. Shield and have the same problem with the Yoozon and have to install another Mr. Shield.

I'm leaving it for now. I will say, the tempered glass Yoozon was much better at repelling fingerprints. The Mr. Shield is a fingerprint magnet.

atg284 · Nov 18, 2015

nickacs said:
Yes, "allegedly", the new version (with the cutout at the bottom), their website says it will start shipping 11/20. However, if you want the "old" design (no bottom cutout), you now have to wait till December. Fck them.

Here is their response as to why they redesigned it:
Tempered Glass Screen Protector - Post #1283 - XDA Forums

I think it's pretty sh!tty to post this response on a forum and not email blast all the customers that ordered, since this does change people's mind about which one to buy. I'll never buy their products again. WHY can all these other companies have theirs in stock and have the proper cutouts (ie. iVoler, Spigen, etc), but IntelliArmor is still dragging their a$$??? Are their screens made of gold or something???

I think the bottom cutout is to help those that have tapered corners on their N6P's. Of all the people that have tapered corners, the bottom right seems to be the worst of all. Not 100% though.

I'm using a decent plastic (PET) film protector currently and it is doing well. I can wait.

6P Screen Protector

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Active member

New member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads

Forum statistics

Share this page