Just thought I would pass this along...
All credit goes to xda developers and its talented devs for coming through on this so fast... Thanks guys!
Its a direct leak from Samsungs firmware servers.
Use Odin to flash the tar file once you have it downloaded. Its complete stock and has root instructions below with screen shots I provided to help aid in installation.
Source Link: Samfirmware EF02.tar download! ( credit XDA developers )
[TIP]We also have a handy, helpful video on installing EF02 by qbking77 (Thanks gbking!)
YouTube - How to update to EF02 2.3 Gingerbread on the Samsung Epic 4G[/TIP]
[INFO]
- Download the Odin tar package from the link provided above.
- You will need to extract the contents using WinRaR or 7zip.
- You will be prompted to enter a password to extract the contents, enter samfirmware.com
- This will extract the following...
Odin v1.81
SPH-D700-EF02-8Gb-REL-DebugKernel.tar
SPH-D700-EF02-8Gb-REL.tar.md5
vitory_8G-100528.pit
- The screen shot below shows where to place the files and you should be good to go.
Took me about 2 minutes and 42 seconds to run the Odin package and reboot into Gingerbread.
Download the rooting files needed from the original link provided above. They are located in the OP at that thread. There are two required files.
Place the su.zip file on your sdcard. This will be needed to flash after you do the steps below.
Rename the cwm3.1.0.1purple.tar.md5 file so the .md5 is removed.
Then boot into download mode (Shut down device, hold 1 on physical keyboard and press power)
Then place the cwm3.1.0.1.purple.tar file in the PDA slot as shown in the screen shot below.
Uncheck everything except Auto Reboot and press start. This will replace the stock recovery with ClockWorkMod.
Then once you reboot go ahead and shut down and boot into CWM (Vol down+Camera+Power). Flash the su.zip file you downloaded for root access. This will provide the Superuser application and root access to your device...
[WARN]Now remember this is still a ODEX system, so you won't be able to flash any EE03 themes because that is based on a deodexed setup. Give them a few hours I'm sure the devs are already at work on deodexing this setup.
[/WARN]
All credit goes to xda developers and its talented devs for coming through on this so fast... Thanks guys!
[/INFO]
All credit goes to xda developers and its talented devs for coming through on this so fast... Thanks guys!
Its a direct leak from Samsungs firmware servers.
Use Odin to flash the tar file once you have it downloaded. Its complete stock and has root instructions below with screen shots I provided to help aid in installation.
Source Link: Samfirmware EF02.tar download! ( credit XDA developers )
[TIP]We also have a handy, helpful video on installing EF02 by qbking77 (Thanks gbking!)
YouTube - How to update to EF02 2.3 Gingerbread on the Samsung Epic 4G[/TIP]
[INFO]
::: Installation Instructions :::
- Download the Odin tar package from the link provided above.
- You will need to extract the contents using WinRaR or 7zip.
- You will be prompted to enter a password to extract the contents, enter samfirmware.com
- This will extract the following...
Odin v1.81
SPH-D700-EF02-8Gb-REL-DebugKernel.tar
SPH-D700-EF02-8Gb-REL.tar.md5
vitory_8G-100528.pit
- The screen shot below shows where to place the files and you should be good to go.
Took me about 2 minutes and 42 seconds to run the Odin package and reboot into Gingerbread.
::: Rooting Instructions :::
Download the rooting files needed from the original link provided above. They are located in the OP at that thread. There are two required files.
Place the su.zip file on your sdcard. This will be needed to flash after you do the steps below.
Rename the cwm3.1.0.1purple.tar.md5 file so the .md5 is removed.
Then boot into download mode (Shut down device, hold 1 on physical keyboard and press power)
Then place the cwm3.1.0.1.purple.tar file in the PDA slot as shown in the screen shot below.
Uncheck everything except Auto Reboot and press start. This will replace the stock recovery with ClockWorkMod.
Then once you reboot go ahead and shut down and boot into CWM (Vol down+Camera+Power). Flash the su.zip file you downloaded for root access. This will provide the Superuser application and root access to your device...
[WARN]Now remember this is still a ODEX system, so you won't be able to flash any EE03 themes because that is based on a deodexed setup. Give them a few hours I'm sure the devs are already at work on deodexing this setup.
[/WARN]
All credit goes to xda developers and its talented devs for coming through on this so fast... Thanks guys!
[/INFO]
Last edited: