Cool, Thanks LandShark. So basically we can do without, I have a similar question to the one posted earlier. I don't want to change the toggles but is there a way for them to look as they did before prior to flashing SC?
[Retired][ROM]Superclean 2.9.2 EA15/EB01/EB16/EC10 Based
- Thread starter Adrynalyne
- Start date
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Only two ways that I know of: 1) Learn how to theme so you can change the images yourself; or 2) check all of the themes in JaeKar99's themes thread, click on the developer's name next to the theme name and look at the screenshots for the theme in the OP to see if any of the toggles in the quick panel look like what you want.
alrighty, themes roms etc etc EB01 EC01..i started off useing the rom which had EB16 and EC01 and those Rom's gave my fass the hicups. move the phone and walla everything went beserk. EB16 threw me in corner and just would not settle down,, so i went back from the ground up and stuck with the EB01 as close as possible. which has been a golden goodie.. mostly stable, DroidX said one night that Adryn.. stated the EB16 as unstable. my question is why do i see everyone scampering about and mostly EC01,
EB16, talked about in most threads.. Is the EB01 left in the dust ??
my ph reads as thus::
Firmware ver 2.2.1
Baseband S:I500.04 V.EB01
Kernal 2.6.32.9
Build # SCH-I500.EB01
with all the chatter about DL09, EB16, EC01 etc i wonder,did i miss something?
am i on the right track ?
thx in advance (i will tick the TY box, most dont,)
Update... 2.9.2v + comavolt. Currently on 2nd charge... 33 hours on normal usage with 21% left. Excellent!
Last edited:
where did the 2.2.9 + comavolt come from adryn or cyono?which
are ya even on a fascinate
Haha! my bad. I meant 2.9.2v, lol! Thanx for the heads up
Very happy with battery life btwHey folks,
Sorry I neglected this thread so much.
I'm giving an update and will stay on top of it for now on.
We are currently working on a community rom on IRC based on EC01. Now, this may seem weird, but we are going on a theory that ED01 is the same rom. Mainly because, EC01 was compiled 3/30, despite the name conflict.
Sorry I neglected this thread so much.
I'm giving an update and will stay on top of it for now on.
We are currently working on a community rom on IRC based on EC01. Now, this may seem weird, but we are going on a theory that ED01 is the same rom. Mainly because, EC01 was compiled 3/30, despite the name conflict.
Thanks for the update and for everything you and the other developers do. Without you guys, this phone would still be stuck back in the dark ages of eclair.
Thanks again.
Sent from my SCH-I500 using Tapatalk
I flashed the latest ComaVolt today, I can see a little better battery performance on my device.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Just wait a couple days. I experienced the same thing when I first flashed ComaVolt, then everything settled down and I have incredible battery life.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
No need to apologize at all in my mind Adrynalyne. The faithful crowd here at AC have done a real good job at helping each other out. Everyone new coming in is jumping right in to the spirit of things and helping each other out. You and the other devs can feel free to keep working on the community ROM, and all of us here in the AC Fascinate forums will do our best to give you the time, space, and freedom to do just that. Don't want to speak for everyone here, this is just my own personal sentiments.
Shark salute.......Fins to the left, fins to the right.
Whoa!!! Didn't notice at first and it almost slipped by me. Congrats on the bump from Adviser to Moderator.
EDIT-That's just crazy talk that ED01 and EC01 may be the same ROM. I mean I know you are prone to spreading wild rumors and half truths, but that is waaaay far fetched.
Last edited:
Can that comavolt kernel be flashed when using the SC 2.9.2 I flashed through odin or would I have to flash to that SFC 2.9.2v? And my other question is, I am able to get into the red cwm recovery just fine, I never put the update.zip file on my sdcard and was still able to flash a theme perfectly fine, is the update.zip no longer a necessity? Or have I been going about things wrong? lol. And to add that kernel it's done through cwm right?
The comavolt kernels come in both voodoo and nv. So if you want to stick with nv you can. I personally flashed the nv version and I run sc 2.9.2 like you. The update.zip is not needed with the latest cwm. And yes, the kernel is flashed in cwm.
TapATalkin From My SuperClean ComaVolt Kernel Fascinate
Oh alright that's good news! Is there any benefit between using voodoo or non-voodoo? It's making me consider flashing the the SFC 2.9.2v that adryn has in his thread, but I must admit I still don't know a lot about voodoo and non-voodoo. I assume that the SC 2.9.2 that I flashed using DroidX's odin method is non-voodoo in which case flashing the non-voodoo comavolt kernel is going to be my preferred method?
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Yes, for now, just flashing the nonvoodoo comavolt kernel is your preferred method. Start flashing as much as you can in CWM to get really good and proficient at it. There are enough mods and patches you can play with that you shouldn't have to switch ROMs to get practice at using CWM. Also try switching compatible radios a few times in ODIN, there are a few to choose from. You may even want to try flashing a different ROM once you are through with all of that. Once you get proficient at all of that, then you can take a look at switching to voodoo. I still prefer to give this advice so that when you switch to voodoo you don't have to even think about how to flash things in either ODIN or CWM. That way you can just concentrate on the most important rule of voodoo - Don't flash anything nonvoodoo over a voodoo kernel. You can start reading up on what voodoo is and how to make the transition in gunnermike53's thread here:
http://forum.androidcentral.com/ver...11-kernel-built-source-sound-undervolted.html
The actual transition is not difficult at all. Like I said, I still think it is best practice to wait until flashing anything is just second nature to you before switching to voodoo. Fewer headaches that way. I don't want anyone to be scared by voodoo, just completely prepared before they jump in.
Thanks Landshark I really appreciate that info, makes perfect sense to me and I couldn't agree more! I just got done flashing the non-voodoo ComaVolt kernel it flashed fine as far as I know. But afterwards I wondered to myself if I should of cleared the battery stats in cwm or wiped cache etc... All I did was go straight into cwm and flash the kernel without thinking to do anything else, was that alright? And as for telling if it is flashed you just have to pretty much know since it said installation complete, because the kernel number in the phone info remains the same correct? I'm definitely liking SC 2.9.2 with the black alien 2.1 theme, just hoping this comavolt kernel enhances battery life a bit, tho I can't say the battery life is that much worse than when I was completely stock!
On a side note I have another question.. When I'm in contacts and try to use the back button it does not exit contacts, I have to hit the home button. Is there a way to fix that? So far that's the only real issue I've encountered.
On a side note I have another question.. When I'm in contacts and try to use the back button it does not exit contacts, I have to hit the home button. Is there a way to fix that? So far that's the only real issue I've encountered.
I personally have not tried voodoo yet so I can't tell you how much of a difference it would make. Reading other posts it seems that some swear by them and others say they don't see a benefit. So I guess it is just personal preference.I do not notice any lag with a nv so I am not worried about the lag fix of a voodoo. If you already are running nv then you can flash the nv comavolt if you would like. That is what I did a few days after flashing sc 2.9.2nv. I did it with hopes of helping battery life and it has helped me quite a bit. Just do not forget to wipe your cache and davlik in cwm prior to flashing. I have also gotten in the habit of wiping battery stats after flashing, as recommended by the more knowledgeable here. Good luck and let us know how it goes.
EDIT: Landshark must have been answering you at the same time as me. He really knows his stuff and is always one of the first to help folks out. Glad things went good for you.
TapATalkin From My SuperClean ComaVolt Kernel Fascinate
Last edited:
Yeah I forgot to wipe those, would going back in, wiping them then re-flashing comavolt work fine or am I going to have to do a bit more than that now?
Edit: Also wanted to ask why there's no option to 'never sleep while charging' in the applications>development section of settings anymore? I always liked that feature as I tend to make use of it quite a bit while charging.. As for the contacts issue I mentioned earlier, I fixed it some how or another lol.
Last edited:
If it flashed ok and is running fine then you should be good. I would just remember to clear those in the future before flashing to prevent problems. If you do have a problem, you could just go back and clear the cache and then reflash the kernel.
TapATalkin From My SuperClean ComaVolt Kernel Fascinate
Similar threads
Trending Posts
-
Google wallet not working after latest update
- Started by AJ69
- Replies: 7
-
-
-
-
Facebook
Twitter
Instagram