[ROM][5.07.2011][ED01]Community Rom V1.3

I've just done the second clean install of this ROM and I'm still having a problem with GPS. Locking is hit and miss like it has always been on my phone, but when in navigation it seems to lose signal really frequently. On my 12 minute drive home from work, I'm consistantly losing signal 4-5 times. When I was using the stock rom (2.1 and 2.2) it would often take a while to get a lock, but once it did I rarely had any problems.

The first commrom install was from factory fresh 2.2, and I retried a second install last night. Both times included full factory resets and multiple cache wipes. I haven't touched voltage control on this install as I suspected it might be the culprit last time.

I agree. Something isn't right with GPS. I am using Google My Tracks and Trimble AllSport GPS to record bicycle fitness training workouts that I do, and I am finding problems with both apps where the GPS will stop functioning while these apps are logging track data, requiring a reboot of the phone to restore GPS system availability to these apps or any other apps.

I can't say for sure if this was a problem before ComRom or not, but I don't recall having issues when I was on Superclean 2.9.1.
 
This is interesting..I tested out my GPS for you guys as I went around town today and found the following.

I came from DL09 stock to OTA ED01 stock, then cwm , data wipe/fr cache wipe etc, then Comm ROm.. (basically the same way you did)

I usually leave Google Location services off as well as GPS.

The first time I took a trip I enabled Loc services and GPS from the settings menu, then opened the navigation app..I noticed it knew my location according to the map in navigation, but was searching for GPS (searching for GPS at bottom of screen, grey navi symbol in status bar)..I waited about 5 min, then enable wifi. I was unable to get the Navigation to begin to work until I started driving, (I waited about 5 minutes before I drove off). Once it locked on and started the navigation I had no lapse, no dropouts. Worked great after that.

Once I arrived at my location, I disabled GPS, WIFI from the status bar, but left LOCATION SERVICES enabled, and headed into my location. After done, Got back in the car to head home, and launched MAPS this time. It gave me a pretty big blue area, but was pretty accurate.. (Just location services at this point).I touched the location Icon in the upper right corner of maps and it prompted the compass feature, which then prompted me to calibrate by waving my phone in figure 8's a few times.(never done this before)..After calibration it locked my location more accurately. I then soft key searched for my address at home, and then clicked on the map place icon for my address once it found it. I then selected driving navigation, and it prompted me to enable GPS..I did so (didn't prompt enable WiFi this time?). and Navigation began immediately. NO driving first to get it going. Once again, no drop out, or errors once I got going..

In short, you might try leaving google location services enabled all the time, and try to go through google maps instead of launching navigation app alone...

As far as the data dropout, did/do you have dropout problems when your making a call on your drive home ?.. I'm sure you all made sure mobile data is enabled in the status bar while driving with navigation..

Hope that helps..
 
I am not sure if this has been directly pointed out in this huge ass thread so just in case it helps anyone out with GPS issues here it is:

[ROM][4.27.2011][ED01]Community Rom V1.2 - Page 19 - xda-developers

Directly from adrynalyne:

"I mean a data wipe after installing rom. That way the modified secgps.conf file gets regenerated with the settings I chose."

I am not sure if everyone understands that the Data Wipe needs to be done AFTER installing the Community ROM Kangbang as per stated above by Adrynalyne.
 
  • Like
Reactions: Lttlwing16
I am not sure if this has been directly pointed out in this huge ass thread so just in case it helps anyone out with GPS issues here it is:

[ROM][4.27.2011][ED01]Community Rom V1.2 - Page 19 - xda-developers

Directly from adrynalyne:

"I mean a data wipe after installing rom. That way the modified secgps.conf file gets regenerated with the settings I chose."

I am not sure if everyone understands that the Data Wipe needs to be done AFTER installing the Community ROM Kangbang as per stated above by Adrynalyne.

I guess I missed that. I'll give it a try and see if it helps. I'm assuming that means full factory reset and cache/dalvik wipe?
 
I understand your problem my man, and I would like to help you out. It helps knowing all the steps you followed to trouble shoot. This is the reason I asked.

Some things to consider..


1. Coming from a stock ROM "out of the box", to a custom ROM, does not mean you shouldn't do as the developer recommended in wiping data/factory reset, and as others recommend by wiping cache. Cutting corners will get you a a phone that is buggy, and some contacts that don't show up right. (If you did do this, sorry, I didn't know cause you wouldn't tell me)

2. You didn't ODIN a fresh start. There is no Com Rom ODIN package available. You simply installed clockwork recovery via ODIN prior to flashing the comrom. If you had ODIN'd a new packaged ROM/KERNEL/ROOT/RECOVERY like DXC's packages than you could say you ODIN'd a fresh start. ODIN back to stock, then OTA to 2.2. isn't a "clean start" in my opinion.

3. My phone works fine and I followed the exact process you did with exception of wiping data/factory reset, clearing cache's prior to flashing com rom.. so I am reluctant to believe it's a bug in the ROM. (unless you did this, once again I can't tell..you didn't feel it necessary to list the steps you followed)

4. In thinking back, my contacts that I had pictures stored via google contacts, worked fine across all applications, PRIOR to linking in FB as I mentioned earlier. So once again, I'm hesitant to conclude it's the ROM.

I've been reading this thread since it's genesis, and haven't come across too many people with your set of problems. You may have got a bad download, so I would recommend you redownload, wipe data/fr, wipe both your cache's, then reflash.... reboot all the way, then flash 1.2 patch.. (If you haven't done this already!)


Good luck!

Well, let's once again cover the topic of my post, and why for some reason you have an inability to understand it. You must be of the belief that other than the creator's of the Community Rom, you are the only person to have an understanding of the the modding world. That is apparent by your comments in my thread, which I didn't specifically seek you out for your "great wisdom" or other reasons. I simply posted a comment for all members of the thread to see, and if they had any SPECIFIC knowledge or experience of the issue, to feel free to comment.

If you don't know what the problem is, then just leave it alone for someone who really knows the issues to deal with. I certainly didn't ask for the "modding for beginners 101" chapter and verse.

It is clear you don't take the time to read the full content of at least the posts I have made (which explains why you just "can't understand" the problem). After going through several of the last "superclean" variations, I am quite familiar with what info is needed in order to provide assistance.

1.) From what I have read and understand, when you "odin" your software back to an image of the original 2.1 software, it is essentially like erasing the drive and starting over, with no remnants of the previous OS around. This is different than say flashing com. rom over SC 9.2 where bits and pieces are still lying around from other roms. This process of going from original out of the box image to EA28 to 2.2 to community rom 1.0 to 1.1 took around 1 hour to complete. When doing this series of upgrades, I didn't install anything other than my initial google account, so there shouldn't be any need to clear application data when none was used. If I was going to "cut corners" as you have stated, why wouldn't I have just flashed over my SC 2.9.2 installation?

I am quite aware of how to clear cache and Dalvik (as I repeatedly posted).

2.) Read my post again citing the "fresh start" comment. I never said I pulled my phone out of the box, tuned it on, and *boom* it was suddenly on Community Rom. In my initial post I cited exactly what I did, and my inference that it is "fresh" was simply saying I erased everything, started from the very beginning, installed the series of OTA updates, installed CWM and then Com Rom. Once again, I am not sure why you would be "lost" if you had read the info that I had posted.

3.) I am really glad your phone works fine. Here is a *cookie*. Now either you have special vision which is only able to read (not comprehend) my posts, or you must have forgotten the numerous other people who have posted on this thread who also have had issues. Many of them are different issues, but issues that apparently you aren't having. This is the reality for people who want to mod their phones. Since I have been following this community, random "bugs" and issues are present in all of the iterations of the previous roms I have seen and used. You know the funny thing is, my phone works just fine too. The issues I experienced are minor and in all actuality, this rom thus far, has been the cleanest and smoothest running of all the roms that I have used. You would know that was my experience had you actually read my responses to your posts.

4. You are the only one who keeps inserting "facebook" into my discussion. Yes, as by now I'm sure we are all aware, when you install the facebook apk, one of the options available is for FB to insert your FB friend's picture over your corresponding contact's pictures. This is an option which if not checked, doesn't change anything. Nowhere in my posts did I mention anything about FB, although you keep inserting that into your replies. Also, since I mention that the android Robot only appears when making calls, your theory implies that all of my FB friends must have the same Android robot as their profile picture. Again, take time to read the posts before just shooting from the hip, saves everyone soo much time!

5. Let the record reflect that your official recommended fix is to forget everything and completely start over. Much akin to the computer industry's standard response to "reformat your drive and reinstall windows" any time you have a software issue. I got that the last 3 times you posted it. If you had read my response, you would know, I understand that process, and don't want to go through all of that "just because", as it is a pain in the ass. Again, reformat and reinstall is not necessarily the best way to address let's say a driver issue. As previously stated, I don't know if it is a "bug" in the system or something else, as I only posted my issue to see if anyone else was having a similar experience.

While your enthusiasm is admirable, please leave the trouble shooting to the experts, those who really are familiar with and know how to address the issues. Any of us could blindly take a shot in the dark with a "do this, do that" mentality, however to those who are affected by the issue, it really is just a giant waste of time and a source of frustration when the recommendations are unfounded and just random guesses.

In conclusion, the apparent moral of the this story is, if someone in a crowded room yell's "is there a doctor in the house?", don't run over to the person and perform a tracheotomy unless you are ACTUALLY a Dr!
 
Nighthawk I like to tell people, "I am what my failures make me"...I just simply offer the advice I have gathered from my experience, mostly problems I personally have encountered, have helped others overcome, or have read others helping others overcome. I never claimed to know everything, however, I DO understand your issue. I do think the method I listed would be a good first step to get your issue resolved, and I believe the local "experts" would probably agree...

With that said, I personally offer my apology if in attempting to help you with your issue you were insulted..those were not at all my intentions. For that I am sorry...If you would like help from a specific person or expert here on AC, than I would PM them to get help.. and include in your post in the thread , that you wouldn't like anyone to help you but someone with SPECIFIC knowledge on this issue or an expert on the issue. You could have also mentioned to me, via pm or on this thread, that your not interested in my help.

Otherwise this is a public forum, and open to comments, i.e. troubleshooting.

Sincerely sorry, and Best of luck getting your issues resolved succesfully..
 
I guess I missed that. I'll give it a try and see if it helps. I'm assuming that means full factory reset and cache/dalvik wipe?

Thanks, Suicide, but where did you find this post (adrynalyne's recommended data wipe post flashing com rom)? If it's in this thread what post, if not what thread did you find it? XDA maybe?

EDIT: Nevermind Found IT! haha..XDA as I suspected
 
Last edited:
I seem to be having an issue were some of my setting are being reset when I reboot my phone. Anyone else notice this or know how to fix it? I like using driving mode so that the phone tells me who's calling, etc., but when the phone reboots, it un-checks that option. Also happens with voltage control.
I did do a fresh install of the rom. And I didnt have this issue with Superclean.

Thanks for any help.
 
While your enthusiasm is admirable, please leave the trouble shooting to the experts, those who really are familiar with and know how to address the issues. Any of us could blindly take a shot in the dark with a "do this, do that" mentality, however to those who are affected by the issue, it really is just a giant waste of time and a source of frustration when the recommendations are unfounded and just random guesses.

In conclusion, the apparent moral of the this story is, if someone in a crowded room yell's "is there a doctor in the house?", don't run over to the person and perform a tracheotomy unless you are ACTUALLY a Dr!

All I can say is WOW!

You don't need to take his advice or help. If you feel he is taking a shot in the dark don't bother with the suggestion. He is not holding a gun to your head. He is only trying to help you.

The arrogance in your post is appalling and not needed here. A simple reply that the suggestion did not work or that you are not willing to try the suggestion for whatever reason would suffice. I am not sure if you are aware that your post is down right insulting.


Lttlwing16 I applaud your response while being insulted in this manner. I myself would have simply resonded:


But thats me :)
 
Last edited by a moderator:
  • Like
Reactions: Lttlwing16
Thanks, Suicide, but where did you find this post (adrynalyne's recommended data wipe post flashing com rom)? If it's in this thread what post, if not what thread did you find it? XDA maybe?

When I click the link I posted it takes me directly to his post. It should be on Page 19 about half way down maybe.

**EDIT**

To get there manually go to

Samsung FascinateFascinate Android Development[ROM][4.27.2011][ED01]Community Rom V1.2

Page 19

Post # 187

http://forum.xda-developers.com/showpost.php?p=13205750&postcount=187
 
I guess I missed that. I'll give it a try and see if it helps. I'm assuming that means full factory reset and cache/dalvik wipe?

Looking in CWM 2.5.X I assume that means the

Wipe Data / Factory Reset

option in the main menu

I am not aware of any other data wipe other than dalvik and cache wipe which I would do as well.

Before I do each of these "wipes" I first go to "mounts and storage". Here I make sure that my /data and /dbdata are mounted. If it says "mount" next to these they ARE NOT mounted.

I cannot recall which one of these "wipe" options resets this so before I wipe davlik, cache, or data I go and make sure that these two directories are mounted. You will notice that one of the wipes resets them back. It may be the fix permissions that does it I can't recall.

So if it were me I do the following:

1. Ensure /data and /dbdata are mounted (should say (unmount) next to them if they are indeed mounted.

2. Wipe Data / Factory Reset

3. Ensure /data and /dbdata are mounted (should say (unmount) next to them if they are indeed mounted.

4. Wipe Davlik

5. Ensure /data and /dbdata are mounted (should say (unmount) next to them if they are indeed mounted.

6. Wipe Cache

7. Ensure /data and /dbdata are mounted (should say (unmount) next to them if they are indeed mounted.

8. Fix Permissions

9. Ensure /data and /dbdata are mounted (should say (unmount) next to them if they are indeed mounted.

10. Flash ROM / Kernel (Kangbang)

11. Repeat steps 1 thru 8 and boot phone fully

Now this may be overkill and I am sure it is. This is just what I do as it makes me feel better that I am as clean as can be before applying anything.
 
Nighthawk I like to tell people, "I am what my failures make me"...I just simply offer the advice I have gathered from my experience, mostly problems I personally have encountered, have helped others overcome, or have read others helping others overcome. I never claimed to know everything, however, I DO understand your issue. I do think the method I listed would be a good first step to get your issue resolved, and I believe the local "experts" would probably agree...

With that said, I personally offer my apology if in attempting to help you with your issue you were insulted..those were not at all my intentions. For that I am sorry...If you would like help from a specific person or expert here on AC, than I would PM them to get help.. and include in your post in the thread , that you wouldn't like anyone to help you but someone with SPECIFIC knowledge on this issue or an expert on the issue. You could have also mentioned to me, via pm or on this thread, that your not interested in my help.

Otherwise this is a public forum, and open to comments, i.e. troubleshooting.

Sincerely sorry, and Best of luck getting your issues resolved succesfully..

Most people would have gathered that from the initial responses I sent to your comments. Enough has been said about this issue, yet you still feel the need to "educate" me about the ability to PM someone directly. I'm not sure how to respond to that? Did you create the internet, and subsequently this forum? If so, I must take a bow to you. If not, then do take note, the mere fact that we are on a "modding" forum, generally indicates we are a bit more sophisticated than your every day user. Update your "how to" guide, the PM feature is not a hidden secret. If I wanted to pm someone directly regarding the issue, I would have done so. Your statement that I either PM the creators directly, or submit to your wayward guessing and like it, is just absurd.

Contrary to your belief (and apparent approval) my initial post was done exactly the way I intended it to be, for everyone to see. In a public forum, yes comments are always welcomed. What is not welcomed, however is when someone like yourself hijacks their thread and imposes their unfounded guesses and theories on the matter, specifically when the questioning party replies with a "thanks, but no thanks" reply. Yet, you don't take the hint and continue to lecture me, in an outline form of your unwelcome responses.

Just drop it already and bug someone else for a change, please.
 
Thanks for the link, didn't realize you had linked it in your post, as I was dealing with an issue, see above ;) . Thanks for the backup, I sincerely hope our friend nighthawk gets his issues resolved when one of our local experts becomes available to help him.

So do you think the OP means to clear data before and after flashing Com Rom? Just after? There is nothing in this thread posted by Adry about flashing afterwards, apart from your link, I've checked.

Thanks in advance.

EDIT: I just wiped beforehand and haven't had any significant gps issues.
 
Last edited:
All I can say is WOW!

You don't need to take his advice or help. If you feel he is taking a shot in the dark don't bother with the suggestion. He is not holding a gun to your head. He is only trying to help you.

The arrogance in your post is appalling and not needed here. A simple reply that the suggestion did not work or that you are not willing to try the suggestion for whatever reason would suffice. I am not sure if you are aware that your post is down right insulting.


Lttlwing16 I applaud your response while being insulted in this manner. I myself would have simply resonded:


But thats me :)

If you go back several pages, you will see that I did in fact do that. Mr. Wing either didn't read it, or simply just ignored it. And yes, when in fact someone keeps hijacking your question, when you have already waved them off, it is frustrating, a waste of time, and dare I say.....insulting. Before you start to throw your stones, might I suggest you go back and read the full context of the issue instead of one response.
 
Last edited by a moderator:
If you go back several pages, you will see that I did in fact do that. Mr. Wing either didn't read it, or simply just ignored it. And yes, when in fact someone keeps hijacking your question, when you have already waved them off, it is frustrating, a waste of time, and dare I say.....insulting. Before you start to throw your stones, might I suggest you go back and read the full context of the issue instead of one response.

Regardless he was trying to help in every way he could. We will just know better to ignore your posts in the future starting now.

Good luck
 
Thanks for the link, didn't realize you had linked it in your post, as I was dealing with an issue, see above ;) . Thanks for the backup, I sincerely hope our friend nighthawk gets his issues resolved when one of our local experts becomes available to help him.

So do you think the OP means to clear data before and after flashing Com Rom? Just after? There is nothing in this thread posted by Adry about flashing afterwards, apart from your link, I've checked.

Thanks in advance.

EDIT: I just wiped beforehand and haven't had any significant gps issues.

I think the OP needs to be edited actually. It is not required to do a data wipe but for the GPS changes he made it is and it appears from his post at the other site this needs to be done after the ROM is installed. I don't believe it needs to be done before and after I just choose to do that myself as a wipe is a wipe is a wipe and I am not loosing any more or less doing it that way. :)

After scouring the thread at the other site I saw that post from Adryn and I as well performed the data wipe prior to installing Kangbang. Now I did not have any issues with GPS either but since I read that post with an explanation as to why I figured what the hell I'll go wipe it again.

I have not seen any difference after wiping it really either. I would say my GPS has always worked about the same from SC 2.x.x to now.
 
  • Like
Reactions: Lttlwing16
anything on the audio out for the desk cradle for the comm rom? Been trying to mess with mine all morning and get nothing out of the speakers. searched high and low and can't find anyone commenting about.
 
From OP: Car cradle supports aosp music app...

Doesn't mention that the desk cradle would work..Deskcradle app isn't included in ComRom either. Try using your carcradle app with the desk cradle and see if that works...
 
From OP: Car cradle supports aosp music app...

Doesn't mention that the desk cradle would work..Deskcradle app isn't included in ComRom either. Try using your carcradle app with the desk cradle and see if that works...

ya no dice either. oh well...