yup, you should be good. The drivers are usually the big issue since most people skip that step but it sounds like you shouldn't have any problems. Just download the 2.8 wipe version which will download as a .rar. Inside of that will be a .tar which is what you'll need to select in Odin so that's where WinRAR comes in. Make sure you get the little yellow box with COM # in it and you're ready to flash.
[Odin] Froyo leaked packaged custom ROMs w/root and clockwork **UPDATED**3/25
- Thread starter DroidXcon
- Start date
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Yes that answers the update.zip question. Leave it as is, don't unzip or extract it.
Second, just check the first post in this thread. If you don't see a 2.9 package listed it isn't available yet. Last I knew DroidXcon was still working on it.
You are exactly right about using the 2.8 wipe version then using cwm to go to 2.9. And here's your added bonus for today. If you want to do that, you don't have to download the update.zip file. Leave it off your sd card and phone completely. After you have followed DroidXcon's instructions and loaded up 2.8 and powered on your phone and everything is good, download the sc 2.9 zip file to your sd card and do the following:
Power off phone. Pull battery, open ODIN, connect phone and flash this file MEGAUPLOAD - The leading online storage and file delivery service in ODIN. Sc 2.9 includes this stable red cwm-all which does not have the error messages, but you have to flash it in ODIN to overwrite the current unstable red cwm. Do not boot your phone. Put the battery back in, hold down the volume up, volume down, and power buttons until you see the samsung logo flash twice, then let go of all three buttons as soon as you see it flash for the second time. You will boot directly to red cwm. Scroll to install zip from sd card and hit the power button, scroll to choose zip from sd card, power button, scroll to 2.9 zip file, power button, scroll to the only yes, power button. You will see some blue script flashing on the screen, don't panic that is normal and is letting you know the ROM is being installed. When it is done and you get the installation complete message, hit the soft menu key until you are back at the main red cwm menu where reboot system now will be highlighted, power button and wait for the phone to reboot. Now when you boot to recovery you will boot straight to red cwm-all every time without having to go through stock blue recovery.
Last edited:
- Update.zip, yes, transfer it to the SD card, as is.
- 2.9 isn't avail just yet. DXC is working on it. If you want to upgrade to 2.8 WIPE, you can do that until he has 2.9 Non-Wipe up there. Depends on how much patience you have in waiting. I for one, have very little.
If you have a 64 bit system, use these 64 bit drivers. I'm not sure if the drivers on the first post are 32 or 64 or a combo of both. But I know that these are 64 bit for sure.
RE: Guru, don't look at me. I'm just a troll.
Thanks alot, I appreciate the help! I have a crazy few days ahead of me, but wanted to make sure I had everything right before I dove in. Might be a few days before I try this, but I'll let everyone know how it goes when I do this.
Thanks again PJ
Thanks again PJ
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
haha. good job guys
Sorry about changing things up on you there guys. This is something I have been working on for a long time - our ability on nonvoodoo to boot directly to red, and it was solved very simply by our deity and savior Adrynalyne including the cwm-all in 2.9. I even wrote up a whole how to thread on doing this before, but it became irrelevant when flashing a ROM caused our phones to revert back to stock blue recovery because of the stock kernel in the ROM. I'm going to update that how to and bring it back to the front of the rooting forum. But for now you can read the instructions I laid out and start helping people do this so we don't have to bother going through stock blue recovery first and have to tell new rooters to use the home soft key with blue, but the power button with red. Thanks for all your help, all of you.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
No need to extract on the diver files especially if you get them from the Samsung site. Just download them then double click on the file to install. If I remember correctly the driver file has an exe file included which will do the install.
I'm still a fan of leaving the update.zip there. You never know when something might go wonky and you might need it. Better safe than sorry.
UPDATE sorry guys 2.9 is not up, i have been working on alot of stuff and have been having some personal issues, its been a bad last 2 days.. ill keep working on it tonight and hopefully standup and landshark can help me out in testing
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Sorry about the confusion Bfascinated. Make sure to follow my steps in post # 2923 and don't save the update.zip to your sd card. I was editing some instructions I copied over from another post of mine to tailor the instructions to your situation while the other great helpers PJnc284 and Sud were helping you.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
Are you still booting directly to red cwm without the bitmap error messages even with update.zip on the sd card? I haven't had a chance to test that yet?
That's for sure.... Just trying to cover all my bases before attempting. I'll keep them, but I'll try samsung's first I think.
Landshark
Well-known member
- Jan 11, 2011
- 4,434
- 1,382
- 113
No problem. The three of us have got it and we'll get everyone to 2.9 either directly if they are already on 2.8 or through your ODIN 2.8 first if they are coming from Eclair. This will run like clockwork (pun intended) as we are a well-oiled machine.
Hey guys I have a problem...it happens sometimes but not all the time...but it still annoying me so just asking if there's a way to solve this problem...the problem is that When someone calls me my phone display turns on and won't shutt off by itself after few seconds....any thoguhts??
I've been skipping blue and going straight to red for a while since I'm on voodoo. I flashed the 3.0 cwm from Rom Manager when Adrynalyne first tried the edify script so applying update.zip from red takes me to orange
Last edited:
Similar threads
Trending Posts
-
iPhone to Pixel 10 Pro/ProXL people!
- Started by Mushkie11
- Replies: 2
-
Phone Wifi connected without internet
- Started by marthaHoopkins1976
- Replies: 3
-
eSim only - Hard pass
- Started by chevyman29
- Replies: 36
-
Facebook
Twitter
Instagram